Re: [PATCH v4 net-next 12/13] net: enetc: add preliminary support for i.MX95 ENETC PF

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Oct 22, 2024 at 01:52:22PM +0800, Wei Fang wrote:
> The i.MX95 ENETC has been upgraded to revision 4.1, which is different
> from the LS1028A ENETC (revision 1.0) except for the SI part. Therefore,
> the fsl-enetc driver is incompatible with i.MX95 ENETC PF. So add new
> nxp-enetc4 driver to support i.MX95 ENETC PF, and this driver will be
> used to support the ENETC PF with major revision 4 for other SoCs in the
> future.
>
> Currently, the nxp-enetc4 driver only supports basic transmission feature
> for i.MX95 ENETC PF, the more basic and advanced features will be added
> in the subsequent patches.
>
> Signed-off-by: Wei Fang <wei.fang@xxxxxxx>
> ---
> v2 changes:
> 1. Refine the commit message.
> 2. Sort the header files.
> 3. Use dev_err_probe() in enetc4_pf_probe().
> 4. Remove unused variable 'pf' from enetc4_pf_remove().
> v3 changes:
> 1. Remove is_enetc_rev1() from enetc_init_si_rings_params().
> 2. Use devm_add_action_or_reset() in enetc4_pf_probe().
> 3. Directly return dev_err_probe() in enetc4_pf_probe().
> v4 changes:
> 1. Move clk_freq from enect_si to enetc_ndev_priv.
> 2. Remove is_enetc_rev4().
> 3. Add enetc4_pf_ethtool_ops for i.MX95 ENETC PF.
> ---
>  drivers/net/ethernet/freescale/enetc/Kconfig  |  17 +
>  drivers/net/ethernet/freescale/enetc/Makefile |   3 +
>  drivers/net/ethernet/freescale/enetc/enetc.c  |  38 +-
>  drivers/net/ethernet/freescale/enetc/enetc.h  |  13 +-
>  .../net/ethernet/freescale/enetc/enetc4_hw.h  | 151 ++++
>  .../net/ethernet/freescale/enetc/enetc4_pf.c  | 753 ++++++++++++++++++
>  .../ethernet/freescale/enetc/enetc_ethtool.c  |  36 +-
>  .../net/ethernet/freescale/enetc/enetc_hw.h   |  13 +-
>  .../net/ethernet/freescale/enetc/enetc_pf.h   |   9 +
>  .../freescale/enetc/enetc_pf_common.c         |  13 +-
>  .../net/ethernet/freescale/enetc/enetc_qos.c  |   2 +-
>  .../net/ethernet/freescale/enetc/enetc_vf.c   |   2 +
>  12 files changed, 1024 insertions(+), 26 deletions(-)
>  create mode 100644 drivers/net/ethernet/freescale/enetc/enetc4_hw.h
>  create mode 100644 drivers/net/ethernet/freescale/enetc/enetc4_pf.c
>
> diff --git a/drivers/net/ethernet/freescale/enetc/Kconfig b/drivers/net/ethernet/freescale/enetc/Kconfig
> index e1b151a98b41..6c2779047dcd 100644
> --- a/drivers/net/ethernet/freescale/enetc/Kconfig
> +++ b/drivers/net/ethernet/freescale/enetc/Kconfig
> @@ -33,6 +33,23 @@ config FSL_ENETC
>
>  	  If compiled as module (M), the module name is fsl-enetc.
>
> +config NXP_ENETC4
> +	tristate "ENETC4 PF driver"
> +	depends on PCI_MSI
> +	select MDIO_DEVRES
> +	select FSL_ENETC_CORE
> +	select FSL_ENETC_MDIO
> +	select NXP_ENETC_PF_COMMON
> +	select PHYLINK
> +	select DIMLIB
> +	help
> +	  This driver supports NXP ENETC devices with major revision 4. ENETC is
> +	  as the NIC functionality in NETC, it supports virtualization/isolation
> +	  based on PCIe Single Root IO Virtualization (SR-IOV) and a full range
> +	  of TSN standards and NIC offload capabilities.
> +
> +	  If compiled as module (M), the module name is nxp-enetc4.
> +
>  config FSL_ENETC_VF
>  	tristate "ENETC VF driver"
>  	depends on PCI_MSI
> diff --git a/drivers/net/ethernet/freescale/enetc/Makefile b/drivers/net/ethernet/freescale/enetc/Makefile
> index ebe232673ed4..6fd27ee4fcd1 100644
> --- a/drivers/net/ethernet/freescale/enetc/Makefile
> +++ b/drivers/net/ethernet/freescale/enetc/Makefile
> @@ -11,6 +11,9 @@ fsl-enetc-y := enetc_pf.o
>  fsl-enetc-$(CONFIG_PCI_IOV) += enetc_msg.o
>  fsl-enetc-$(CONFIG_FSL_ENETC_QOS) += enetc_qos.o
>
> +obj-$(CONFIG_NXP_ENETC4) += nxp-enetc4.o
> +nxp-enetc4-y := enetc4_pf.o
> +
>  obj-$(CONFIG_FSL_ENETC_VF) += fsl-enetc-vf.o
>  fsl-enetc-vf-y := enetc_vf.o
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c
> index bccbeb1f355c..1541c1bb888f 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc.c
> @@ -2,6 +2,7 @@
>  /* Copyright 2017-2019 NXP */
>
>  #include "enetc.h"
> +#include <linux/clk.h>
>  #include <linux/bpf_trace.h>
>  #include <linux/tcp.h>
>  #include <linux/udp.h>
> @@ -21,7 +22,7 @@ void enetc_port_mac_wr(struct enetc_si *si, u32 reg, u32 val)
>  {
>  	enetc_port_wr(&si->hw, reg, val);
>  	if (si->hw_features & ENETC_SI_F_QBU)
> -		enetc_port_wr(&si->hw, reg + ENETC_PMAC_OFFSET, val);
> +		enetc_port_wr(&si->hw, reg + si->pmac_offset, val);
>  }
>  EXPORT_SYMBOL_GPL(enetc_port_mac_wr);
>
> @@ -700,8 +701,9 @@ static void enetc_rx_dim_work(struct work_struct *w)
>  		net_dim_get_rx_moderation(dim->mode, dim->profile_ix);
>  	struct enetc_int_vector	*v =
>  		container_of(dim, struct enetc_int_vector, rx_dim);
> +	struct enetc_ndev_priv *priv = netdev_priv(v->rx_ring.ndev);
>
> -	v->rx_ictt = enetc_usecs_to_cycles(moder.usec);
> +	v->rx_ictt = enetc_usecs_to_cycles(moder.usec, priv->sysclk_freq);
>  	dim->state = DIM_START_MEASURE;
>  }
>
> @@ -1726,9 +1728,15 @@ void enetc_get_si_caps(struct enetc_si *si)
>  	si->num_rx_rings = (val >> 16) & 0xff;
>  	si->num_tx_rings = val & 0xff;
>
> -	val = enetc_rd(hw, ENETC_SIRFSCAPR);
> -	si->num_fs_entries = ENETC_SIRFSCAPR_GET_NUM_RFS(val);
> -	si->num_fs_entries = min(si->num_fs_entries, ENETC_MAX_RFS_SIZE);
> +	val = enetc_rd(hw, ENETC_SIPCAPR0);
> +	if (val & ENETC_SIPCAPR0_RFS) {
> +		val = enetc_rd(hw, ENETC_SIRFSCAPR);
> +		si->num_fs_entries = ENETC_SIRFSCAPR_GET_NUM_RFS(val);
> +		si->num_fs_entries = min(si->num_fs_entries, ENETC_MAX_RFS_SIZE);
> +	} else {
> +		/* ENETC which not supports RFS */
> +		si->num_fs_entries = 0;
> +	}
>
>  	si->num_rss = 0;
>  	val = enetc_rd(hw, ENETC_SIPCAPR0);
> @@ -1742,8 +1750,11 @@ void enetc_get_si_caps(struct enetc_si *si)
>  	if (val & ENETC_SIPCAPR0_QBV)
>  		si->hw_features |= ENETC_SI_F_QBV;
>
> -	if (val & ENETC_SIPCAPR0_QBU)
> +	if (val & ENETC_SIPCAPR0_QBU) {
>  		si->hw_features |= ENETC_SI_F_QBU;
> +		si->pmac_offset = is_enetc_rev1(si) ? ENETC_PMAC_OFFSET :
> +						      ENETC4_PMAC_OFFSET;

pmac_offset should not relate with ENETC_SIPCAPR0_QBU.
such data should be in drvdata generally.

pmac_offset always be ENETC_PMAC_OFFSET at ver1 and ENETC4_PMAC_OFFSET
at rev4 regardless if support ENETC_SIPCAPR0_QBU.

> +	}
>
>  	if (val & ENETC_SIPCAPR0_PSFP)
>  		si->hw_features |= ENETC_SI_F_PSFP;
> @@ -2056,7 +2067,7 @@ int enetc_configure_si(struct enetc_ndev_priv *priv)
>  	/* enable SI */
>  	enetc_wr(hw, ENETC_SIMR, ENETC_SIMR_EN);
>
> -	if (si->num_rss) {
> +	if (si->num_rss && is_enetc_rev1(si)) {
>  		err = enetc_setup_default_rss_table(si, priv->num_rx_rings);
>  		if (err)
>  			return err;
> @@ -2080,9 +2091,9 @@ void enetc_init_si_rings_params(struct enetc_ndev_priv *priv)
>  	 */
>  	priv->num_rx_rings = min_t(int, cpus, si->num_rx_rings);
>  	priv->num_tx_rings = si->num_tx_rings;
> -	priv->bdr_int_num = cpus;
> +	priv->bdr_int_num = priv->num_rx_rings;
>  	priv->ic_mode = ENETC_IC_RX_ADAPTIVE | ENETC_IC_TX_MANUAL;
> -	priv->tx_ictt = ENETC_TXIC_TIMETHR;
> +	priv->tx_ictt = enetc_usecs_to_cycles(600, priv->sysclk_freq);
>  }
>  EXPORT_SYMBOL_GPL(enetc_init_si_rings_params);
>
> @@ -2475,10 +2486,14 @@ int enetc_open(struct net_device *ndev)
>
>  	extended = !!(priv->active_offloads & ENETC_F_RX_TSTAMP);
>
> -	err = enetc_setup_irqs(priv);
> +	err = clk_prepare_enable(priv->ref_clk);
>  	if (err)
>  		return err;
>
> +	err = enetc_setup_irqs(priv);
> +	if (err)
> +		goto err_setup_irqs;
> +
>  	err = enetc_phylink_connect(ndev);
>  	if (err)
>  		goto err_phy_connect;
> @@ -2510,6 +2525,8 @@ int enetc_open(struct net_device *ndev)
>  		phylink_disconnect_phy(priv->phylink);
>  err_phy_connect:
>  	enetc_free_irqs(priv);
> +err_setup_irqs:
> +	clk_disable_unprepare(priv->ref_clk);
>
>  	return err;
>  }
> @@ -2559,6 +2576,7 @@ int enetc_close(struct net_device *ndev)
>  	enetc_assign_tx_resources(priv, NULL);
>
>  	enetc_free_irqs(priv);
> +	clk_disable_unprepare(priv->ref_clk);
>
>  	return 0;
>  }
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc.h b/drivers/net/ethernet/freescale/enetc/enetc.h
> index 97524dfa234c..fe4bc082b3cf 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc.h
> +++ b/drivers/net/ethernet/freescale/enetc/enetc.h
> @@ -14,6 +14,7 @@
>  #include <net/xdp.h>
>
>  #include "enetc_hw.h"
> +#include "enetc4_hw.h"
>
>  #define ENETC_MAC_MAXFRM_SIZE	9600
>  #define ENETC_MAX_MTU		(ENETC_MAC_MAXFRM_SIZE - \
> @@ -247,10 +248,16 @@ struct enetc_si {
>  	int num_rss; /* number of RSS buckets */
>  	unsigned short pad;
>  	int hw_features;
> +	int pmac_offset; /* Only valid for PSI which supports 802.1Qbu */
>  };
>
>  #define ENETC_SI_ALIGN	32
>
> +static inline bool is_enetc_rev1(struct enetc_si *si)
> +{
> +	return si->pdev->revision == ENETC_REV1;
> +}
> +
>  static inline void *enetc_si_priv(const struct enetc_si *si)
>  {
>  	return (char *)si + ALIGN(sizeof(struct enetc_si), ENETC_SI_ALIGN);
> @@ -302,7 +309,7 @@ struct enetc_cls_rule {
>  	int used;
>  };
>
> -#define ENETC_MAX_BDR_INT	2 /* fixed to max # of available cpus */
> +#define ENETC_MAX_BDR_INT	6 /* fixed to max # of available cpus */
>  struct psfp_cap {
>  	u32 max_streamid;
>  	u32 max_psfp_filter;
> @@ -340,7 +347,6 @@ enum enetc_ic_mode {
>
>  #define ENETC_RXIC_PKTTHR	min_t(u32, 256, ENETC_RX_RING_DEFAULT_SIZE / 2)
>  #define ENETC_TXIC_PKTTHR	min_t(u32, 128, ENETC_TX_RING_DEFAULT_SIZE / 2)
> -#define ENETC_TXIC_TIMETHR	enetc_usecs_to_cycles(600)
>
>  struct enetc_ndev_priv {
>  	struct net_device *ndev;
> @@ -388,6 +394,9 @@ struct enetc_ndev_priv {
>  	 * and link state updates
>  	 */
>  	struct mutex		mm_lock;
> +
> +	struct clk *ref_clk; /* RGMII/RMII reference clock */
> +	u64 sysclk_freq; /* NETC system clock frequency */

You can get ref_clk from dt, why not get sysclk from dt also and fetch
frequency from clock provider instead of hardcode in driver.

>  };
>
>  /* Messaging */
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc4_hw.h b/drivers/net/ethernet/freescale/enetc/enetc4_hw.h
> new file mode 100644
> index 000000000000..b53549e810c9
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/enetc/enetc4_hw.h
> @@ -0,0 +1,151 @@
> +/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) */
> +/*
> + * This header file defines the register offsets and bit fields
> + * of ENETC4 PF and VFs. Note that the same registers as ENETC
> + * version 1.0 are defined in the enetc_hw.h file.
> + *
> + * Copyright 2024 NXP
> + */
> +#ifndef __ENETC4_HW_H_
> +#define __ENETC4_HW_H_
> +
> +/***************************ENETC port registers**************************/
> +#define ENETC4_ECAPR0			0x0
> +#define  ECAPR0_RFS			BIT(2)
> +#define  ECAPR0_TSD			BIT(5)
> +#define  ECAPR0_RSS			BIT(8)
> +#define  ECAPR0_RSC			BIT(9)
> +#define  ECAPR0_LSO			BIT(10)
> +#define  ECAPR0_WO			BIT(13)
> +
> +#define ENETC4_ECAPR1			0x4
> +#define  ECAPR1_NUM_TCS			GENMASK(6, 4)
> +#define  ECAPR1_NUM_MCH			GENMASK(9, 8)
> +#define  ECAPR1_NUM_UCH			GENMASK(11, 10)
> +#define  ECAPR1_NUM_MSIX		GENMASK(22, 12)
> +#define  ECAPR1_NUM_VSI			GENMASK(27, 24)
> +#define  ECAPR1_NUM_IPV			BIT(31)
> +
> +#define ENETC4_ECAPR2			0x8
> +#define  ECAPR2_NUM_TX_BDR		GENMASK(9, 0)
> +#define  ECAPR2_NUM_RX_BDR		GENMASK(25, 16)
> +
> +#define ENETC4_PMR			0x10
> +#define  PMR_SI_EN(a)			BIT((16 + (a)))
> +
> +/* Port Pause ON/OFF threshold register */
> +#define ENETC4_PPAUONTR			0x108
> +#define ENETC4_PPAUOFFTR		0x10c
> +
> +/* Port Station interface promiscuous MAC mode register */
> +#define ENETC4_PSIPMMR			0x200
> +#define  PSIPMMR_SI_MAC_UP(a)		BIT(a) /* a = SI index */
> +#define  PSIPMMR_SI_MAC_MP(a)		BIT((a) + 16)
> +
> +/* Port Station interface promiscuous VLAN mode register */
> +#define ENETC4_PSIPVMR			0x204
> +
> +/* Port RSS key register n. n = 0,1,2,...,9 */
> +#define ENETC4_PRSSKR(n)		((n) * 0x4 + 0x250)
> +
> +/* Port station interface MAC address filtering capability register */
> +#define ENETC4_PSIMAFCAPR		0x280
> +#define  PSIMAFCAPR_NUM_MAC_AFTE	GENMASK(11, 0)
> +
> +/* Port station interface VLAN filtering capability register */
> +#define ENETC4_PSIVLANFCAPR		0x2c0
> +#define  PSIVLANFCAPR_NUM_VLAN_FTE	GENMASK(11, 0)
> +
> +/* Port station interface VLAN filtering mode register */
> +#define ENETC4_PSIVLANFMR		0x2c4
> +#define  PSIVLANFMR_VS			BIT(0)
> +
> +/* Port Station interface a primary MAC address registers */
> +#define ENETC4_PSIPMAR0(a)		((a) * 0x80 + 0x2000)
> +#define ENETC4_PSIPMAR1(a)		((a) * 0x80 + 0x2004)
> +
> +/* Port station interface a configuration register 0/2 */
> +#define ENETC4_PSICFGR0(a)		((a) * 0x80 + 0x2010)
> +#define  PSICFGR0_VASE			BIT(13)
> +#define  PSICFGR0_ASE			BIT(15)
> +#define  PSICFGR0_ANTI_SPOOFING		(PSICFGR0_VASE | PSICFGR0_ASE)
> +
> +#define ENETC4_PSICFGR2(a)		((a) * 0x80 + 0x2018)
> +
> +#define ENETC4_PMCAPR			0x4004
> +#define  PMCAPR_HD			BIT(8)
> +#define  PMCAPR_FP			GENMASK(10, 9)
> +
> +/* Port configuration register */
> +#define ENETC4_PCR			0x4010
> +#define  PCR_HDR_FMT			BIT(0)
> +#define  PCR_L2DOSE			BIT(4)
> +#define  PCR_TIMER_CS			BIT(8)
> +#define  PCR_PSPEED			GENMASK(29, 16)
> +#define  PCR_PSPEED_VAL(speed)		(((speed) / 10 - 1) << 16)
> +
> +/* Port MAC address register 0/1 */
> +#define ENETC4_PMAR0			0x4020
> +#define ENETC4_PMAR1			0x4024
> +
> +/* Port operational register */
> +#define ENETC4_POR			0x4100
> +
> +/* Port traffic class a transmit maximum SDU register */
> +#define ENETC4_PTCTMSDUR(a)		((a) * 0x20 + 0x4208)
> +#define  PTCTMSDUR_MAXSDU		GENMASK(15, 0)
> +#define  PTCTMSDUR_SDU_TYPE		GENMASK(17, 16)
> +#define   SDU_TYPE_PPDU			0
> +#define   SDU_TYPE_MPDU			1
> +#define   SDU_TYPE_MSDU			2
> +
> +#define ENETC4_PMAC_OFFSET		0x400
> +#define ENETC4_PM_CMD_CFG(mac)		(0x5008 + (mac) * 0x400)
> +#define  PM_CMD_CFG_TX_EN		BIT(0)
> +#define  PM_CMD_CFG_RX_EN		BIT(1)
> +#define  PM_CMD_CFG_PAUSE_FWD		BIT(7)
> +#define  PM_CMD_CFG_PAUSE_IGN		BIT(8)
> +#define  PM_CMD_CFG_TX_ADDR_INS		BIT(9)
> +#define  PM_CMD_CFG_LOOP_EN		BIT(10)
> +#define  PM_CMD_CFG_LPBK_MODE		GENMASK(12, 11)
> +#define   LPBCK_MODE_EXT_TX_CLK		0
> +#define   LPBCK_MODE_MAC_LEVEL		1
> +#define   LPBCK_MODE_INT_TX_CLK		2
> +#define  PM_CMD_CFG_CNT_FRM_EN		BIT(13)
> +#define  PM_CMD_CFG_TXP			BIT(15)
> +#define  PM_CMD_CFG_SEND_IDLE		BIT(16)
> +#define  PM_CMD_CFG_HD_FCEN		BIT(18)
> +#define  PM_CMD_CFG_SFD			BIT(21)
> +#define  PM_CMD_CFG_TX_FLUSH		BIT(22)
> +#define  PM_CMD_CFG_TX_LOWP_EN		BIT(23)
> +#define  PM_CMD_CFG_RX_LOWP_EMPTY	BIT(24)
> +#define  PM_CMD_CFG_SWR			BIT(26)
> +#define  PM_CMD_CFG_TS_MODE		BIT(30)
> +#define  PM_CMD_CFG_MG			BIT(31)
> +
> +/* Port MAC 0/1 Maximum Frame Length Register */
> +#define ENETC4_PM_MAXFRM(mac)		(0x5014 + (mac) * 0x400)
> +
> +/* Port MAC 0/1 Pause Quanta Register */
> +#define ENETC4_PM_PAUSE_QUANTA(mac)	(0x5054 + (mac) * 0x400)
> +
> +/* Port MAC 0/1 Pause Quanta Threshold Register */
> +#define ENETC4_PM_PAUSE_THRESH(mac)	(0x5064 + (mac) * 0x400)
> +
> +/* Port MAC 0 Interface Mode Control Register */
> +#define ENETC4_PM_IF_MODE(mac)		(0x5300 + (mac) * 0x400)
> +#define  PM_IF_MODE_IFMODE		GENMASK(2, 0)
> +#define   IFMODE_XGMII			0
> +#define   IFMODE_RMII			3
> +#define   IFMODE_RGMII			4
> +#define   IFMODE_SGMII			5
> +#define  PM_IF_MODE_REVMII		BIT(3)
> +#define  PM_IF_MODE_M10			BIT(4)
> +#define  PM_IF_MODE_HD			BIT(6)
> +#define  PM_IF_MODE_SSP			GENMASK(14, 13)
> +#define   SSP_100M			0
> +#define   SSP_10M			1
> +#define   SSP_1G			2
> +#define  PM_IF_MODE_ENA			BIT(15)
> +
> +#endif
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc4_pf.c b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
> new file mode 100644
> index 000000000000..8e1b0a8f5ebe
> --- /dev/null
> +++ b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
> @@ -0,0 +1,753 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
> +/* Copyright 2024 NXP */
> +
> +#include <linux/clk.h>
> +#include <linux/fsl/netc_global.h>
> +#include <linux/module.h>
> +#include <linux/of_net.h>
> +#include <linux/of_platform.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <linux/unaligned.h>
> +
> +#include "enetc_pf.h"
> +
> +#define ENETC_SI_MAX_RING_NUM	8
> +
> +static void enetc4_get_port_caps(struct enetc_pf *pf)
> +{
> +	struct enetc_hw *hw = &pf->si->hw;
> +	u32 val;
> +
> +	val = enetc_port_rd(hw, ENETC4_ECAPR1);
> +	pf->caps.num_vsi = (val & ECAPR1_NUM_VSI) >> 24;
> +	pf->caps.num_msix = ((val & ECAPR1_NUM_MSIX) >> 12) + 1;
> +
> +	val = enetc_port_rd(hw, ENETC4_ECAPR2);
> +	pf->caps.num_rx_bdr = (val & ECAPR2_NUM_RX_BDR) >> 16;
> +	pf->caps.num_tx_bdr = val & ECAPR2_NUM_TX_BDR;
> +
> +	val = enetc_port_rd(hw, ENETC4_PMCAPR);
> +	pf->caps.half_duplex = (val & PMCAPR_HD) ? 1 : 0;
> +}
> +
> +static void enetc4_pf_set_si_primary_mac(struct enetc_hw *hw, int si,
> +					 const u8 *addr)
> +{
> +	u16 lower = get_unaligned_le16(addr + 4);
> +	u32 upper = get_unaligned_le32(addr);
> +
> +	if (si != 0) {
> +		__raw_writel(upper, hw->port + ENETC4_PSIPMAR0(si));
> +		__raw_writew(lower, hw->port + ENETC4_PSIPMAR1(si));
> +	} else {
> +		__raw_writel(upper, hw->port + ENETC4_PMAR0);
> +		__raw_writew(lower, hw->port + ENETC4_PMAR1);
> +	}
> +}
> +
> +static void enetc4_pf_get_si_primary_mac(struct enetc_hw *hw, int si,
> +					 u8 *addr)
> +{
> +	u32 upper;
> +	u16 lower;
> +
> +	upper = __raw_readl(hw->port + ENETC4_PSIPMAR0(si));
> +	lower = __raw_readw(hw->port + ENETC4_PSIPMAR1(si));
> +
> +	put_unaligned_le32(upper, addr);
> +	put_unaligned_le16(lower, addr + 4);
> +}
> +
> +static const struct enetc_pf_ops enetc4_pf_ops = {
> +	.set_si_primary_mac = enetc4_pf_set_si_primary_mac,
> +	.get_si_primary_mac = enetc4_pf_get_si_primary_mac,
> +};
> +
> +static int enetc4_pf_struct_init(struct enetc_si *si)
> +{
> +	struct enetc_pf *pf = enetc_si_priv(si);
> +
> +	pf->si = si;
> +	pf->total_vfs = pci_sriov_get_totalvfs(si->pdev);
> +
> +	enetc4_get_port_caps(pf);
> +	enetc_pf_ops_register(pf, &enetc4_pf_ops);
> +
> +	return 0;
> +}
> +
> +static u32 enetc4_psicfgr0_val_construct(bool is_vf, u32 num_tx_bdr, u32 num_rx_bdr)
> +{
> +	u32 val;
> +
> +	val = ENETC_PSICFGR0_SET_TXBDR(num_tx_bdr);
> +	val |= ENETC_PSICFGR0_SET_RXBDR(num_rx_bdr);
> +	val |= ENETC_PSICFGR0_SIVC(ENETC_VLAN_TYPE_C | ENETC_VLAN_TYPE_S);
> +
> +	if (is_vf)
> +		val |= ENETC_PSICFGR0_VTE | ENETC_PSICFGR0_SIVIE;
> +
> +	return val;
> +}
> +
> +static void enetc4_default_rings_allocation(struct enetc_pf *pf)
> +{
> +	struct enetc_hw *hw = &pf->si->hw;
> +	u32 num_rx_bdr, num_tx_bdr, val;
> +	u32 vf_tx_bdr, vf_rx_bdr;
> +	int i, rx_rem, tx_rem;
> +
> +	if (pf->caps.num_rx_bdr < ENETC_SI_MAX_RING_NUM + pf->caps.num_vsi)
> +		num_rx_bdr = pf->caps.num_rx_bdr - pf->caps.num_vsi;
> +	else
> +		num_rx_bdr = ENETC_SI_MAX_RING_NUM;
> +
> +	if (pf->caps.num_tx_bdr < ENETC_SI_MAX_RING_NUM + pf->caps.num_vsi)
> +		num_tx_bdr = pf->caps.num_tx_bdr - pf->caps.num_vsi;
> +	else
> +		num_tx_bdr = ENETC_SI_MAX_RING_NUM;
> +
> +	val = enetc4_psicfgr0_val_construct(false, num_tx_bdr, num_rx_bdr);
> +	enetc_port_wr(hw, ENETC4_PSICFGR0(0), val);
> +
> +	num_rx_bdr = pf->caps.num_rx_bdr - num_rx_bdr;
> +	rx_rem = num_rx_bdr % pf->caps.num_vsi;
> +	num_rx_bdr = num_rx_bdr / pf->caps.num_vsi;
> +
> +	num_tx_bdr = pf->caps.num_tx_bdr - num_tx_bdr;
> +	tx_rem = num_tx_bdr % pf->caps.num_vsi;
> +	num_tx_bdr = num_tx_bdr / pf->caps.num_vsi;
> +
> +	for (i = 0; i < pf->caps.num_vsi; i++) {
> +		vf_tx_bdr = (i < tx_rem) ? num_tx_bdr + 1 : num_tx_bdr;
> +		vf_rx_bdr = (i < rx_rem) ? num_rx_bdr + 1 : num_rx_bdr;
> +		val = enetc4_psicfgr0_val_construct(true, vf_tx_bdr, vf_rx_bdr);
> +		enetc_port_wr(hw, ENETC4_PSICFGR0(i + 1), val);
> +	}
> +}
> +
> +static void enetc4_allocate_si_rings(struct enetc_pf *pf)
> +{
> +	enetc4_default_rings_allocation(pf);
> +}
> +
> +static void enetc4_pf_set_si_vlan_promisc(struct enetc_hw *hw, int si, bool en)
> +{
> +	u32 val = enetc_port_rd(hw, ENETC4_PSIPVMR);
> +
> +	if (en)
> +		val |= BIT(si);
> +	else
> +		val &= ~BIT(si);
> +
> +	enetc_port_wr(hw, ENETC4_PSIPVMR, val);
> +}
> +
> +static void enetc4_set_default_si_vlan_promisc(struct enetc_pf *pf)
> +{
> +	struct enetc_hw *hw = &pf->si->hw;
> +	int num_si = pf->caps.num_vsi + 1;
> +	int i;
> +
> +	/* enforce VLAN promisc mode for all SIs */
> +	for (i = 0; i < num_si; i++)
> +		enetc4_pf_set_si_vlan_promisc(hw, i, true);
> +}
> +
> +/* Allocate the number of MSI-X vectors for per SI. */
> +static void enetc4_set_si_msix_num(struct enetc_pf *pf)
> +{
> +	struct enetc_hw *hw = &pf->si->hw;
> +	int i, num_msix, total_si;
> +	u32 val;
> +
> +	total_si = pf->caps.num_vsi + 1;
> +
> +	num_msix = pf->caps.num_msix / total_si +
> +		   pf->caps.num_msix % total_si - 1;
> +	val = num_msix & 0x3f;
> +	enetc_port_wr(hw, ENETC4_PSICFGR2(0), val);
> +
> +	num_msix = pf->caps.num_msix / total_si - 1;
> +	val = num_msix & 0x3f;
> +	for (i = 0; i < pf->caps.num_vsi; i++)
> +		enetc_port_wr(hw, ENETC4_PSICFGR2(i + 1), val);
> +}
> +
> +static void enetc4_enable_all_si(struct enetc_pf *pf)
> +{
> +	struct enetc_hw *hw = &pf->si->hw;
> +	int num_si = pf->caps.num_vsi + 1;
> +	u32 si_bitmap = 0;
> +	int i;
> +
> +	/* Master enable for all SIs */
> +	for (i = 0; i < num_si; i++)
> +		si_bitmap |= PMR_SI_EN(i);
> +
> +	enetc_port_wr(hw, ENETC4_PMR, si_bitmap);
> +}
> +
> +static void enetc4_configure_port_si(struct enetc_pf *pf)
> +{
> +	struct enetc_hw *hw = &pf->si->hw;
> +
> +	enetc4_allocate_si_rings(pf);
> +
> +	/* Outer VLAN tag will be used for VLAN filtering */
> +	enetc_port_wr(hw, ENETC4_PSIVLANFMR, PSIVLANFMR_VS);
> +
> +	enetc4_set_default_si_vlan_promisc(pf);
> +
> +	/* Disable SI MAC multicast & unicast promiscuous */
> +	enetc_port_wr(hw, ENETC4_PSIPMMR, 0);
> +
> +	enetc4_set_si_msix_num(pf);
> +
> +	enetc4_enable_all_si(pf);
> +}
> +
> +static void enetc4_pf_reset_tc_msdu(struct enetc_hw *hw)
> +{
> +	u32 val = ENETC_MAC_MAXFRM_SIZE;
> +	int tc;
> +
> +	val = u32_replace_bits(val, SDU_TYPE_MPDU, PTCTMSDUR_SDU_TYPE);
> +
> +	for (tc = 0; tc < 8; tc++)

hard code 8? can you macro for it?

> +		enetc_port_wr(hw, ENETC4_PTCTMSDUR(tc), val);
> +}
> +
> +static void enetc4_set_trx_frame_size(struct enetc_pf *pf)
> +{
> +	struct enetc_si *si = pf->si;
> +
> +	enetc_port_mac_wr(si, ENETC4_PM_MAXFRM(0),
> +			  ENETC_SET_MAXFRM(ENETC_MAC_MAXFRM_SIZE));
> +
> +	enetc4_pf_reset_tc_msdu(&si->hw);
> +}
> +
> +static void enetc4_set_rss_key(struct enetc_hw *hw, const u8 *bytes)
> +{
> +	int i;
> +
> +	for (i = 0; i < ENETC_RSSHASH_KEY_SIZE / 4; i++)
> +		enetc_port_wr(hw, ENETC4_PRSSKR(i), ((u32 *)bytes)[i]);
> +}
> +
> +static void enetc4_set_default_rss_key(struct enetc_pf *pf)
> +{
> +	u8 hash_key[ENETC_RSSHASH_KEY_SIZE] = {0};
> +	struct enetc_hw *hw = &pf->si->hw;
> +
> +	/* set up hash key */
> +	get_random_bytes(hash_key, ENETC_RSSHASH_KEY_SIZE);
> +	enetc4_set_rss_key(hw, hash_key);
> +}
> +
> +static void enetc4_enable_trx(struct enetc_pf *pf)
> +{
> +	struct enetc_hw *hw = &pf->si->hw;
> +
> +	/* Enable port transmit/receive */
> +	enetc_port_wr(hw, ENETC4_POR, 0);
> +}
> +
> +static void enetc4_configure_port(struct enetc_pf *pf)
> +{
> +	enetc4_configure_port_si(pf);
> +	enetc4_set_trx_frame_size(pf);
> +	enetc4_set_default_rss_key(pf);
> +	enetc4_enable_trx(pf);
> +}
> +
> +static int enetc4_pf_init(struct enetc_pf *pf)
> +{
> +	struct device *dev = &pf->si->pdev->dev;
> +	int err;
> +
> +	/* Initialize the MAC address for PF and VFs */
> +	err = enetc_setup_mac_addresses(dev->of_node, pf);
> +	if (err) {
> +		dev_err(dev, "Failed to set MAC addresses\n");
> +		return err;
> +	}
> +
> +	enetc4_configure_port(pf);
> +
> +	return 0;
> +}
> +
> +static const struct net_device_ops enetc4_ndev_ops = {
> +	.ndo_open		= enetc_open,
> +	.ndo_stop		= enetc_close,
> +	.ndo_start_xmit		= enetc_xmit,
> +	.ndo_get_stats		= enetc_get_stats,
> +	.ndo_set_mac_address	= enetc_pf_set_mac_addr,
> +};
> +
> +static struct phylink_pcs *
> +enetc4_pl_mac_select_pcs(struct phylink_config *config, phy_interface_t iface)
> +{
> +	struct enetc_pf *pf = phylink_to_enetc_pf(config);
> +
> +	return pf->pcs;
> +}
> +
> +static void enetc4_mac_config(struct enetc_pf *pf, unsigned int mode,
> +			      phy_interface_t phy_mode)
> +{
> +	struct enetc_ndev_priv *priv = netdev_priv(pf->si->ndev);
> +	struct enetc_si *si = pf->si;
> +	u32 val;
> +
> +	val = enetc_port_mac_rd(si, ENETC4_PM_IF_MODE(0));
> +	val &= ~(PM_IF_MODE_IFMODE | PM_IF_MODE_ENA);
> +
> +	switch (phy_mode) {
> +	case PHY_INTERFACE_MODE_RGMII:
> +	case PHY_INTERFACE_MODE_RGMII_ID:
> +	case PHY_INTERFACE_MODE_RGMII_RXID:
> +	case PHY_INTERFACE_MODE_RGMII_TXID:
> +		val |= IFMODE_RGMII;
> +		/* We need to enable auto-negotiation for the MAC
> +		 * if its RGMII interface support In-Band status.
> +		 */
> +		if (phylink_autoneg_inband(mode))
> +			val |= PM_IF_MODE_ENA;
> +		break;
> +	case PHY_INTERFACE_MODE_RMII:
> +		val |= IFMODE_RMII;
> +		break;
> +	case PHY_INTERFACE_MODE_SGMII:
> +	case PHY_INTERFACE_MODE_2500BASEX:
> +		val |= IFMODE_SGMII;
> +		break;
> +	case PHY_INTERFACE_MODE_10GBASER:
> +	case PHY_INTERFACE_MODE_XGMII:
> +	case PHY_INTERFACE_MODE_USXGMII:
> +		val |= IFMODE_XGMII;
> +		break;
> +	default:
> +		dev_err(priv->dev,
> +			"Unsupported PHY mode:%d\n", phy_mode);
> +		return;
> +	}
> +
> +	enetc_port_mac_wr(si, ENETC4_PM_IF_MODE(0), val);
> +}
> +
> +static void enetc4_pl_mac_config(struct phylink_config *config, unsigned int mode,
> +				 const struct phylink_link_state *state)
> +{
> +	struct enetc_pf *pf = phylink_to_enetc_pf(config);
> +
> +	enetc4_mac_config(pf, mode, state->interface);
> +}
> +
> +static void enetc4_set_port_speed(struct enetc_ndev_priv *priv, int speed)
> +{
> +	u32 old_speed = priv->speed;
> +	u32 val;
> +
> +	if (speed == old_speed)
> +		return;
> +
> +	val = enetc_port_rd(&priv->si->hw, ENETC4_PCR);
> +	val &= ~PCR_PSPEED;
> +
> +	switch (speed) {
> +	case SPEED_100:
> +	case SPEED_1000:
> +	case SPEED_2500:
> +	case SPEED_10000:
> +		val |= (PCR_PSPEED & PCR_PSPEED_VAL(speed));
> +		break;
> +	case SPEED_10:
> +	default:
> +		val |= (PCR_PSPEED & PCR_PSPEED_VAL(SPEED_10));
> +	}
> +
> +	priv->speed = speed;
> +	enetc_port_wr(&priv->si->hw, ENETC4_PCR, val);
> +}
> +
> +static void enetc4_set_rgmii_mac(struct enetc_pf *pf, int speed, int duplex)
> +{
> +	struct enetc_si *si = pf->si;
> +	u32 old_val, val;
> +
> +	old_val = enetc_port_mac_rd(si, ENETC4_PM_IF_MODE(0));
> +	val = old_val & ~(PM_IF_MODE_ENA | PM_IF_MODE_M10 | PM_IF_MODE_REVMII);
> +
> +	switch (speed) {
> +	case SPEED_1000:
> +		val = u32_replace_bits(val, SSP_1G, PM_IF_MODE_SSP);
> +		break;
> +	case SPEED_100:
> +		val = u32_replace_bits(val, SSP_100M, PM_IF_MODE_SSP);
> +		break;
> +	case SPEED_10:
> +		val = u32_replace_bits(val, SSP_10M, PM_IF_MODE_SSP);
> +	}
> +
> +	val = u32_replace_bits(val, duplex == DUPLEX_FULL ? 0 : 1,
> +			       PM_IF_MODE_HD);
> +
> +	if (val == old_val)
> +		return;
> +
> +	enetc_port_mac_wr(si, ENETC4_PM_IF_MODE(0), val);
> +}
> +
> +static void enetc4_set_rmii_mac(struct enetc_pf *pf, int speed, int duplex)
> +{
> +	struct enetc_si *si = pf->si;
> +	u32 old_val, val;
> +
> +	old_val = enetc_port_mac_rd(si, ENETC4_PM_IF_MODE(0));
> +	val = old_val & ~(PM_IF_MODE_ENA | PM_IF_MODE_SSP);
> +
> +	switch (speed) {
> +	case SPEED_100:
> +		val &= ~PM_IF_MODE_M10;
> +		break;
> +	case SPEED_10:
> +		val |= PM_IF_MODE_M10;
> +	}
> +
> +	val = u32_replace_bits(val, duplex == DUPLEX_FULL ? 0 : 1,
> +			       PM_IF_MODE_HD);
> +
> +	if (val == old_val)
> +		return;
> +
> +	enetc_port_mac_wr(si, ENETC4_PM_IF_MODE(0), val);
> +}
> +
> +static void enetc4_set_hd_flow_control(struct enetc_pf *pf, bool enable)
> +{
> +	struct enetc_si *si = pf->si;
> +	u32 old_val, val;
> +
> +	if (!pf->caps.half_duplex)
> +		return;
> +
> +	old_val = enetc_port_mac_rd(si, ENETC4_PM_CMD_CFG(0));
> +	val = u32_replace_bits(old_val, enable ? 1 : 0, PM_CMD_CFG_HD_FCEN);
> +	if (val == old_val)
> +		return;
> +
> +	enetc_port_mac_wr(si, ENETC4_PM_CMD_CFG(0), val);
> +}
> +
> +static void enetc4_set_rx_pause(struct enetc_pf *pf, bool rx_pause)
> +{
> +	struct enetc_si *si = pf->si;
> +	u32 old_val, val;
> +
> +	old_val = enetc_port_mac_rd(si, ENETC4_PM_CMD_CFG(0));
> +	val = u32_replace_bits(old_val, rx_pause ? 0 : 1, PM_CMD_CFG_PAUSE_IGN);
> +	if (val == old_val)
> +		return;
> +
> +	enetc_port_mac_wr(si, ENETC4_PM_CMD_CFG(0), val);
> +}
> +
> +static void enetc4_set_tx_pause(struct enetc_pf *pf, int num_rxbdr, bool tx_pause)
> +{
> +	u32 pause_off_thresh = 0, pause_on_thresh = 0;
> +	u32 init_quanta = 0, refresh_quanta = 0;
> +	struct enetc_hw *hw = &pf->si->hw;
> +	u32 rbmr, old_rbmr;
> +	int i;
> +
> +	for (i = 0; i < num_rxbdr; i++) {
> +		old_rbmr = enetc_rxbdr_rd(hw, i, ENETC_RBMR);
> +		rbmr = u32_replace_bits(old_rbmr, tx_pause ? 1 : 0, ENETC_RBMR_CM);
> +		if (rbmr == old_rbmr)
> +			continue;
> +
> +		enetc_rxbdr_wr(hw, i, ENETC_RBMR, rbmr);
> +	}
> +
> +	if (tx_pause) {
> +		/* When the port first enters congestion, send a PAUSE request
> +		 * with the maximum number of quanta. When the port exits
> +		 * congestion, it will automatically send a PAUSE frame with
> +		 * zero quanta.
> +		 */
> +		init_quanta = 0xffff;
> +
> +		/* Also, set up the refresh timer to send follow-up PAUSE
> +		 * frames at half the quanta value, in case the congestion
> +		 * condition persists.
> +		 */
> +		refresh_quanta = 0xffff / 2;
> +
> +		/* Start emitting PAUSE frames when 3 large frames (or more
> +		 * smaller frames) have accumulated in the FIFO waiting to be
> +		 * DMAed to the RX ring.
> +		 */
> +		pause_on_thresh = 3 * ENETC_MAC_MAXFRM_SIZE;
> +		pause_off_thresh = 1 * ENETC_MAC_MAXFRM_SIZE;
> +	}
> +
> +	enetc_port_mac_wr(pf->si, ENETC4_PM_PAUSE_QUANTA(0), init_quanta);
> +	enetc_port_mac_wr(pf->si, ENETC4_PM_PAUSE_THRESH(0), refresh_quanta);
> +	enetc_port_wr(hw, ENETC4_PPAUONTR, pause_on_thresh);
> +	enetc_port_wr(hw, ENETC4_PPAUOFFTR, pause_off_thresh);
> +}
> +
> +static void enetc4_enable_mac(struct enetc_pf *pf, bool en)
> +{
> +	struct enetc_si *si = pf->si;
> +	u32 val;
> +
> +	val = enetc_port_mac_rd(si, ENETC4_PM_CMD_CFG(0));
> +	val &= ~(PM_CMD_CFG_TX_EN | PM_CMD_CFG_RX_EN);
> +	val |= en ? (PM_CMD_CFG_TX_EN | PM_CMD_CFG_RX_EN) : 0;
> +
> +	enetc_port_mac_wr(si, ENETC4_PM_CMD_CFG(0), val);
> +}
> +
> +static void enetc4_pl_mac_link_up(struct phylink_config *config,
> +				  struct phy_device *phy, unsigned int mode,
> +				  phy_interface_t interface, int speed,
> +				  int duplex, bool tx_pause, bool rx_pause)
> +{
> +	struct enetc_pf *pf = phylink_to_enetc_pf(config);
> +	struct enetc_si *si = pf->si;
> +	struct enetc_ndev_priv *priv;
> +	bool hd_fc = false;
> +
> +	priv = netdev_priv(si->ndev);
> +	enetc4_set_port_speed(priv, speed);
> +
> +	if (!phylink_autoneg_inband(mode) &&
> +	    phy_interface_mode_is_rgmii(interface))
> +		enetc4_set_rgmii_mac(pf, speed, duplex);
> +
> +	if (interface == PHY_INTERFACE_MODE_RMII)
> +		enetc4_set_rmii_mac(pf, speed, duplex);
> +
> +	if (duplex == DUPLEX_FULL) {
> +		/* When preemption is enabled, generation of PAUSE frames
> +		 * must be disabled, as stated in the IEEE 802.3 standard.
> +		 */
> +		if (priv->active_offloads & ENETC_F_QBU)
> +			tx_pause = false;
> +	} else { /* DUPLEX_HALF */
> +		if (tx_pause || rx_pause)
> +			hd_fc = true;
> +
> +		/* As per 802.3 annex 31B, PAUSE frames are only supported
> +		 * when the link is configured for full duplex operation.
> +		 */
> +		tx_pause = false;
> +		rx_pause = false;
> +	}
> +
> +	enetc4_set_hd_flow_control(pf, hd_fc);
> +	enetc4_set_tx_pause(pf, priv->num_rx_rings, tx_pause);
> +	enetc4_set_rx_pause(pf, rx_pause);
> +	enetc4_enable_mac(pf, true);
> +}
> +
> +static void enetc4_pl_mac_link_down(struct phylink_config *config,
> +				    unsigned int mode,
> +				    phy_interface_t interface)
> +{
> +	struct enetc_pf *pf = phylink_to_enetc_pf(config);
> +
> +	enetc4_enable_mac(pf, false);
> +}
> +
> +static const struct phylink_mac_ops enetc_pl_mac_ops = {
> +	.mac_select_pcs = enetc4_pl_mac_select_pcs,
> +	.mac_config = enetc4_pl_mac_config,
> +	.mac_link_up = enetc4_pl_mac_link_up,
> +	.mac_link_down = enetc4_pl_mac_link_down,
> +};
> +
> +static void enetc4_pci_remove(void *data)
> +{
> +	struct pci_dev *pdev = data;
> +
> +	enetc_pci_remove(pdev);
> +}
> +
> +static int enetc4_link_init(struct enetc_ndev_priv *priv,
> +			    struct device_node *node)
> +{
> +	struct enetc_pf *pf = enetc_si_priv(priv->si);
> +	struct device *dev = priv->dev;
> +	int err;
> +
> +	err = of_get_phy_mode(node, &pf->if_mode);
> +	if (err) {
> +		dev_err(dev, "Failed to get PHY mode\n");
> +		return err;
> +	}
> +
> +	err = enetc_mdiobus_create(pf, node);
> +	if (err) {
> +		dev_err(dev, "Failed to create MDIO bus\n");
> +		return err;
> +	}
> +
> +	err = enetc_phylink_create(priv, node, &enetc_pl_mac_ops);
> +	if (err) {
> +		dev_err(dev, "Failed to create phylink\n");
> +		goto err_phylink_create;
> +	}
> +
> +	return 0;
> +
> +err_phylink_create:
> +	enetc_mdiobus_destroy(pf);
> +
> +	return err;
> +}
> +
> +static void enetc4_link_deinit(struct enetc_ndev_priv *priv)
> +{
> +	struct enetc_pf *pf = enetc_si_priv(priv->si);
> +
> +	enetc_phylink_destroy(priv);
> +	enetc_mdiobus_destroy(pf);
> +}
> +
> +static int enetc4_pf_netdev_create(struct enetc_si *si)
> +{
> +	struct device *dev = &si->pdev->dev;
> +	struct enetc_ndev_priv *priv;
> +	struct net_device *ndev;
> +	int err;
> +
> +	ndev = alloc_etherdev_mqs(sizeof(struct enetc_ndev_priv),
> +				  si->num_tx_rings, si->num_rx_rings);
> +	if (!ndev)
> +		return  -ENOMEM;
> +
> +	priv = netdev_priv(ndev);
> +	priv->ref_clk = devm_clk_get_optional(dev, "ref");
> +	if (IS_ERR(priv->ref_clk)) {
> +		dev_err(dev, "Get referencce clock failed\n");
> +		err = PTR_ERR(priv->ref_clk);
> +		goto err_clk_get;
> +	}
> +
> +	enetc_pf_netdev_setup(si, ndev, &enetc4_ndev_ops);
> +
> +	enetc_init_si_rings_params(priv);
> +
> +	err = enetc_configure_si(priv);
> +	if (err) {
> +		dev_err(dev, "Failed to configure SI\n");
> +		goto err_config_si;
> +	}
> +
> +	err = enetc_alloc_msix(priv);
> +	if (err) {
> +		dev_err(dev, "Failed to alloc MSI-X\n");
> +		goto err_alloc_msix;
> +	}
> +
> +	err = enetc4_link_init(priv, dev->of_node);
> +	if (err)
> +		goto err_link_init;
> +
> +	err = register_netdev(ndev);
> +	if (err) {
> +		dev_err(dev, "Failed to register netdev\n");
> +		goto err_reg_netdev;
> +	}
> +
> +	return 0;
> +
> +err_reg_netdev:
> +	enetc4_link_deinit(priv);
> +err_link_init:
> +	enetc_free_msix(priv);
> +err_alloc_msix:
> +err_config_si:
> +err_clk_get:
> +	mutex_destroy(&priv->mm_lock);
> +	free_netdev(ndev);
> +
> +	return err;
> +}
> +
> +static void enetc4_pf_netdev_destroy(struct enetc_si *si)
> +{
> +	struct enetc_ndev_priv *priv = netdev_priv(si->ndev);
> +	struct net_device *ndev = si->ndev;
> +
> +	unregister_netdev(ndev);
> +	enetc_free_msix(priv);
> +	free_netdev(ndev);
> +}
> +
> +static int enetc4_pf_probe(struct pci_dev *pdev,
> +			   const struct pci_device_id *ent)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct enetc_si *si;
> +	struct enetc_pf *pf;
> +	int err;
> +
> +	err = enetc_pci_probe(pdev, KBUILD_MODNAME, sizeof(*pf));
> +	if (err)
> +		return dev_err_probe(dev, err, "PCIe probing failed\n");
> +
> +	err = devm_add_action_or_reset(dev, enetc4_pci_remove, pdev);
> +	if (err)
> +		return dev_err_probe(dev, err,
> +				     "Add enetc4_pci_remove() action failed\n");
> +
> +	/* si is the private data. */
> +	si = pci_get_drvdata(pdev);
> +	if (!si->hw.port || !si->hw.global)
> +		return dev_err_probe(dev, -ENODEV,
> +				     "Couldn't map PF only space\n");
> +
> +	err = enetc4_pf_struct_init(si);
> +	if (err)
> +		return err;
> +
> +	pf = enetc_si_priv(si);
> +	err = enetc4_pf_init(pf);
> +	if (err)
> +		return err;
> +
> +	pinctrl_pm_select_default_state(dev);
> +	enetc_get_si_caps(si);
> +
> +	return enetc4_pf_netdev_create(si);
> +}
> +
> +static void enetc4_pf_remove(struct pci_dev *pdev)
> +{
> +	struct enetc_si *si = pci_get_drvdata(pdev);
> +
> +	enetc4_pf_netdev_destroy(si);
> +}
> +
> +static const struct pci_device_id enetc4_pf_id_table[] = {
> +	{ PCI_DEVICE(PCI_VENDOR_ID_NXP2, PCI_DEVICE_ID_NXP2_ENETC_PF) },
> +	{ 0, } /* End of table. */
> +};
> +MODULE_DEVICE_TABLE(pci, enetc4_pf_id_table);
> +
> +static struct pci_driver enetc4_pf_driver = {
> +	.name = KBUILD_MODNAME,
> +	.id_table = enetc4_pf_id_table,
> +	.probe = enetc4_pf_probe,
> +	.remove = enetc4_pf_remove,
> +};
> +module_pci_driver(enetc4_pf_driver);
> +
> +MODULE_DESCRIPTION("ENETC4 PF Driver");
> +MODULE_LICENSE("Dual BSD/GPL");
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> index 2563eb8ac7b6..ed44d27cc6bd 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_ethtool.c
> @@ -775,9 +775,10 @@ static int enetc_get_coalesce(struct net_device *ndev,
>  {
>  	struct enetc_ndev_priv *priv = netdev_priv(ndev);
>  	struct enetc_int_vector *v = priv->int_vector[0];
> +	u64 clk_freq = priv->sysclk_freq;
>
> -	ic->tx_coalesce_usecs = enetc_cycles_to_usecs(priv->tx_ictt);
> -	ic->rx_coalesce_usecs = enetc_cycles_to_usecs(v->rx_ictt);
> +	ic->tx_coalesce_usecs = enetc_cycles_to_usecs(priv->tx_ictt, clk_freq);
> +	ic->rx_coalesce_usecs = enetc_cycles_to_usecs(v->rx_ictt, clk_freq);
>
>  	ic->tx_max_coalesced_frames = ENETC_TXIC_PKTTHR;
>  	ic->rx_max_coalesced_frames = ENETC_RXIC_PKTTHR;
> @@ -793,12 +794,13 @@ static int enetc_set_coalesce(struct net_device *ndev,
>  			      struct netlink_ext_ack *extack)
>  {
>  	struct enetc_ndev_priv *priv = netdev_priv(ndev);
> +	u64 clk_freq = priv->sysclk_freq;
>  	u32 rx_ictt, tx_ictt;
>  	int i, ic_mode;
>  	bool changed;
>
> -	tx_ictt = enetc_usecs_to_cycles(ic->tx_coalesce_usecs);
> -	rx_ictt = enetc_usecs_to_cycles(ic->rx_coalesce_usecs);
> +	tx_ictt = enetc_usecs_to_cycles(ic->tx_coalesce_usecs, clk_freq);
> +	rx_ictt = enetc_usecs_to_cycles(ic->rx_coalesce_usecs, clk_freq);
>
>  	if (ic->rx_max_coalesced_frames != ENETC_RXIC_PKTTHR)
>  		return -EOPNOTSUPP;
> @@ -1234,13 +1236,33 @@ static const struct ethtool_ops enetc_vf_ethtool_ops = {
>  	.get_ts_info = enetc_get_ts_info,
>  };
>
> +static const struct ethtool_ops enetc4_pf_ethtool_ops = {
> +	.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
> +				     ETHTOOL_COALESCE_MAX_FRAMES |
> +				     ETHTOOL_COALESCE_USE_ADAPTIVE_RX,
> +	.get_ringparam = enetc_get_ringparam,
> +	.get_coalesce = enetc_get_coalesce,
> +	.set_coalesce = enetc_set_coalesce,
> +	.get_link_ksettings = enetc_get_link_ksettings,
> +	.set_link_ksettings = enetc_set_link_ksettings,
> +	.get_link = ethtool_op_get_link,
> +	.get_wol = enetc_get_wol,
> +	.set_wol = enetc_set_wol,
> +	.get_pauseparam = enetc_get_pauseparam,
> +	.set_pauseparam = enetc_set_pauseparam,
> +};
> +
>  void enetc_set_ethtool_ops(struct net_device *ndev)
>  {
>  	struct enetc_ndev_priv *priv = netdev_priv(ndev);
>
> -	if (enetc_si_is_pf(priv->si))
> -		ndev->ethtool_ops = &enetc_pf_ethtool_ops;
> -	else
> +	if (enetc_si_is_pf(priv->si)) {
> +		if (is_enetc_rev1(priv->si))
> +			ndev->ethtool_ops = &enetc_pf_ethtool_ops;
> +		else
> +			ndev->ethtool_ops = &enetc4_pf_ethtool_ops;
> +	} else {
>  		ndev->ethtool_ops = &enetc_vf_ethtool_ops;
> +	}
>  }
>  EXPORT_SYMBOL_GPL(enetc_set_ethtool_ops);
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_hw.h b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
> index 6a7b9b75d660..a9b61925b291 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_hw.h
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_hw.h
> @@ -25,6 +25,7 @@
>  #define ENETC_SIPCAPR0_RSS	BIT(8)
>  #define ENETC_SIPCAPR0_QBV	BIT(4)
>  #define ENETC_SIPCAPR0_QBU	BIT(3)
> +#define ENETC_SIPCAPR0_RFS	BIT(2)
>  #define ENETC_SIPCAPR1	0x24
>  #define ENETC_SITGTGR	0x30
>  #define ENETC_SIRBGCR	0x38
> @@ -971,15 +972,17 @@ struct enetc_cbd {
>  	u8 status_flags;
>  };
>
> -#define ENETC_CLK  400000000ULL
> -static inline u32 enetc_cycles_to_usecs(u32 cycles)
> +#define ENETC_CLK_400M		400000000ULL
> +#define ENETC_CLK_333M		333000000ULL
> +
> +static inline u32 enetc_cycles_to_usecs(u32 cycles, u64 clk_freq)
>  {
> -	return (u32)div_u64(cycles * 1000000ULL, ENETC_CLK);
> +	return (u32)div_u64(cycles * 1000000ULL, clk_freq);
>  }
>
> -static inline u32 enetc_usecs_to_cycles(u32 usecs)
> +static inline u32 enetc_usecs_to_cycles(u32 usecs, u64 clk_freq)
>  {
> -	return (u32)div_u64(usecs * ENETC_CLK, 1000000ULL);
> +	return (u32)div_u64(usecs * clk_freq, 1000000ULL);
>  }
>
>  /* Port traffic class frame preemption register */
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf.h b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> index 39db9d5c2e50..5ed97137e5c5 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf.h
> @@ -28,6 +28,14 @@ struct enetc_vf_state {
>  	enum enetc_vf_flags flags;
>  };
>
> +struct enetc_port_caps {
> +	u32 half_duplex:1;
> +	int num_vsi;
> +	int num_msix;
> +	int num_rx_bdr;
> +	int num_tx_bdr;
> +};
> +
>  struct enetc_pf;
>
>  struct enetc_pf_ops {
> @@ -61,6 +69,7 @@ struct enetc_pf {
>  	phy_interface_t if_mode;
>  	struct phylink_config phylink_config;
>
> +	struct enetc_port_caps caps;
>  	const struct enetc_pf_ops *ops;
>  };
>
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
> index 94690ed92e3f..6ce0facd2e97 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
> @@ -121,10 +121,20 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
>  	ndev->vlan_features = NETIF_F_SG | NETIF_F_HW_CSUM |
>  			      NETIF_F_TSO | NETIF_F_TSO6;
>
> +	ndev->priv_flags |= IFF_UNICAST_FLT;
> +
> +	/* TODO: currently, i.MX95 ENETC driver does not support advanced features */
> +	if (is_enetc_rev1(si)) {
> +		priv->sysclk_freq = ENETC_CLK_400M;
> +	} else {
> +		ndev->hw_features &= ~(NETIF_F_HW_VLAN_CTAG_FILTER | NETIF_F_LOOPBACK);
> +		priv->sysclk_freq = ENETC_CLK_333M;
> +		goto end;
> +	}
> +
>  	if (si->num_rss)
>  		ndev->hw_features |= NETIF_F_RXHASH;
>
> -	ndev->priv_flags |= IFF_UNICAST_FLT;
>  	ndev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
>  			     NETDEV_XDP_ACT_NDO_XMIT | NETDEV_XDP_ACT_RX_SG |
>  			     NETDEV_XDP_ACT_NDO_XMIT_SG;
> @@ -136,6 +146,7 @@ void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
>  		ndev->hw_features |= NETIF_F_HW_TC;
>  	}
>
> +end:
>  	/* pick up primary MAC address from SI */
>  	enetc_load_primary_mac_addr(&si->hw, ndev);
>  }
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_qos.c b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
> index b65da49dd926..5fa2f1db87f3 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_qos.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_qos.c
> @@ -336,7 +336,7 @@ int enetc_setup_tc_cbs(struct net_device *ndev, void *type_data)
>  	 *
>  	 * (enetClockFrequency / portTransmitRate) * 100
>  	 */
> -	hi_credit_reg = (u32)div_u64((ENETC_CLK * 100ULL) * hi_credit_bit,
> +	hi_credit_reg = (u32)div_u64((ENETC_CLK_400M * 100ULL) * hi_credit_bit,
>  				     port_transmit_rate * 1000000ULL);
>
>  	enetc_port_wr(hw, ENETC_PTCCBSR1(tc), hi_credit_reg);
> diff --git a/drivers/net/ethernet/freescale/enetc/enetc_vf.c b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
> index dfcaac302e24..2295742b7090 100644
> --- a/drivers/net/ethernet/freescale/enetc/enetc_vf.c
> +++ b/drivers/net/ethernet/freescale/enetc/enetc_vf.c
> @@ -133,6 +133,8 @@ static void enetc_vf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
>  	ndev->watchdog_timeo = 5 * HZ;
>  	ndev->max_mtu = ENETC_MAX_MTU;
>
> +	priv->sysclk_freq = ENETC_CLK_400M;
> +

why vf is fixed at 400M?

Frank

>  	ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM |
>  			    NETIF_F_HW_VLAN_CTAG_TX |
>  			    NETIF_F_HW_VLAN_CTAG_RX |
> --
> 2.34.1
>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux