On Tue, Oct 15, 2024 at 04:33:27PM +0800, Richard Zhu wrote:
> Since dbi2 and atu regs are added for i.MX8M PCIes. Fetch the dbi2 and iATU
> base addresses from DT directly, and remove the useless codes.
>
Again, what will happen to old dts that don't define these regions?
- Mani
> Signed-off-by: Richard Zhu <hongxing.zhu@xxxxxxx>
> ---
> drivers/pci/controller/dwc/pci-imx6.c | 20 --------------------
> 1 file changed, 20 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> index 52a8b2dc828a..2ae6fa4b5d32 100644
> --- a/drivers/pci/controller/dwc/pci-imx6.c
> +++ b/drivers/pci/controller/dwc/pci-imx6.c
> @@ -1113,7 +1113,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
> struct platform_device *pdev)
> {
> int ret;
> - unsigned int pcie_dbi2_offset;
> struct dw_pcie_ep *ep;
> struct dw_pcie *pci = imx_pcie->pci;
> struct dw_pcie_rp *pp = &pci->pp;
> @@ -1123,25 +1122,6 @@ static int imx_add_pcie_ep(struct imx_pcie *imx_pcie,
> ep = &pci->ep;
> ep->ops = &pcie_ep_ops;
>
> - switch (imx_pcie->drvdata->variant) {
> - case IMX8MQ_EP:
> - case IMX8MM_EP:
> - case IMX8MP_EP:
> - pcie_dbi2_offset = SZ_1M;
> - break;
> - default:
> - pcie_dbi2_offset = SZ_4K;
> - break;
> - }
> -
> - pci->dbi_base2 = pci->dbi_base + pcie_dbi2_offset;
> -
> - /*
> - * FIXME: Ideally, dbi2 base address should come from DT. But since only IMX95 is defining
> - * "dbi2" in DT, "dbi_base2" is set to NULL here for that platform alone so that the DWC
> - * core code can fetch that from DT. But once all platform DTs were fixed, this and the
> - * above "dbi_base2" setting should be removed.
> - */
> if (device_property_match_string(dev, "reg-names", "dbi2") >= 0)
> pci->dbi_base2 = NULL;
>
> --
> 2.37.1
>
--
மணிவண்ணன் சதாசிவம்
