The sunxi otg phy has a bug where it wrongly detects a high speed squelch
when reset on the root port gets de-asserted with a lo-speed device.
The workaround for this is to disable squelch detect before de-asserting
reset, and re-enabling it after the reset de-assert is done.
Signed-off-by: Hans de Goede <hdegoede@xxxxxxxxxx>
---
drivers/usb/musb/musb_core.h | 16 ++++++++++++++++
drivers/usb/musb/musb_virthub.c | 2 ++
2 files changed, 18 insertions(+)
diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h
index 444b936..19d7b8c 100644
--- a/drivers/usb/musb/musb_core.h
+++ b/drivers/usb/musb/musb_core.h
@@ -163,6 +163,8 @@ struct musb_io;
* @vbus_status: returns vbus status if possible
* @set_vbus: forces vbus status
* @adjust_channel_params: pre check for standard dma channel_program func
+ * @pre_root_reset_end: called before the root usb port reset flag gets cleared
+ * @post_root_reset_end: called after the root usb port reset flag gets cleared
*/
struct musb_platform_ops {
@@ -205,6 +207,8 @@ struct musb_platform_ops {
int (*adjust_channel_params)(struct dma_channel *channel,
u16 packet_sz, u8 *mode,
dma_addr_t *dma_addr, u32 *len);
+ void (*pre_root_reset_end)(struct musb *musb);
+ void (*post_root_reset_end)(struct musb *musb);
};
/*
@@ -592,4 +596,16 @@ static inline int musb_platform_exit(struct musb *musb)
return musb->ops->exit(musb);
}
+static inline void musb_platform_pre_root_reset_end(struct musb *musb)
+{
+ if (musb->ops->pre_root_reset_end)
+ musb->ops->pre_root_reset_end(musb);
+}
+
+static inline void musb_platform_post_root_reset_end(struct musb *musb)
+{
+ if (musb->ops->post_root_reset_end)
+ musb->ops->post_root_reset_end(musb);
+}
+
#endif /* __MUSB_CORE_H__ */
diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c
index 3c87fd7..e613f8c 100644
--- a/drivers/usb/musb/musb_virthub.c
+++ b/drivers/usb/musb/musb_virthub.c
@@ -195,8 +195,10 @@ void musb_port_reset(struct musb *musb, bool do_reset)
msecs_to_jiffies(50));
} else {
dev_dbg(musb->controller, "root port reset stopped\n");
+ musb_platform_pre_root_reset_end(musb);
musb_writeb(mbase, MUSB_POWER,
power & ~MUSB_POWER_RESET);
+ musb_platform_post_root_reset_end(musb);
power = musb_readb(mbase, MUSB_POWER);
if (power & MUSB_POWER_HSMODE) {
--
2.3.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
