Add support for i.MX8Q series (i.MX8QM, i.MX8QXP, and i.MX8DXL) PCIe Endpoint (EP). On i.MX8Q platforms, the PCI bus addresses differ from the CPU addresses. The DesignWare (DWC) driver already handles this in the common code. Reviewed-by: Richard Zhu <hongxing.zhu@xxxxxxx> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- change from v2 to v3 - add Mani's review tag - Add pci->using_dtbus_info = true; --- drivers/pci/controller/dwc/pci-imx6.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c index bdc2b372e6c13..5be9bac6206a7 100644 --- a/drivers/pci/controller/dwc/pci-imx6.c +++ b/drivers/pci/controller/dwc/pci-imx6.c @@ -70,6 +70,7 @@ enum imx_pcie_variants { IMX8MQ_EP, IMX8MM_EP, IMX8MP_EP, + IMX8Q_EP, IMX95_EP, }; @@ -1079,6 +1080,16 @@ static const struct pci_epc_features imx8m_pcie_epc_features = { .align = SZ_64K, }; +static const struct pci_epc_features imx8q_pcie_epc_features = { + .linkup_notifier = false, + .msi_capable = true, + .msix_capable = false, + .bar[BAR_1] = { .type = BAR_RESERVED, }, + .bar[BAR_3] = { .type = BAR_RESERVED, }, + .bar[BAR_5] = { .type = BAR_RESERVED, }, + .align = SZ_64K, +}; + /* * BAR# | Default BAR enable | Default BAR Type | Default BAR Size | BAR Sizing Scheme * ================================================================================================ @@ -1448,6 +1459,8 @@ static int imx_pcie_probe(struct platform_device *pdev) if (ret) return ret; + pci->using_dtbus_info = true; + if (imx_pcie->drvdata->mode == DW_PCIE_EP_TYPE) { ret = imx_add_pcie_ep(imx_pcie, pdev); if (ret < 0) @@ -1645,6 +1658,14 @@ static const struct imx_pcie_drvdata drvdata[] = { .epc_features = &imx8m_pcie_epc_features, .enable_ref_clk = imx8mm_pcie_enable_ref_clk, }, + [IMX8Q_EP] = { + .variant = IMX8Q_EP, + .flags = IMX_PCIE_FLAG_HAS_PHYDRV, + .mode = DW_PCIE_EP_TYPE, + .epc_features = &imx8q_pcie_epc_features, + .clk_names = imx8q_clks, + .clks_cnt = ARRAY_SIZE(imx8q_clks), + }, [IMX95_EP] = { .variant = IMX95_EP, .flags = IMX_PCIE_FLAG_HAS_SERDES | @@ -1674,6 +1695,7 @@ static const struct of_device_id imx_pcie_of_match[] = { { .compatible = "fsl,imx8mq-pcie-ep", .data = &drvdata[IMX8MQ_EP], }, { .compatible = "fsl,imx8mm-pcie-ep", .data = &drvdata[IMX8MM_EP], }, { .compatible = "fsl,imx8mp-pcie-ep", .data = &drvdata[IMX8MP_EP], }, + { .compatible = "fsl,imx8q-pcie-ep", .data = &drvdata[IMX8Q_EP], }, { .compatible = "fsl,imx95-pcie-ep", .data = &drvdata[IMX95_EP], }, {}, }; -- 2.34.1