Add flexcan1 and flexcan2. Signed-off-by: Frank Li <Frank.Li@xxxxxxx> --- change from v1 to v2 - none --- arch/arm64/boot/dts/freescale/imx8qxp-mek.dts | 47 +++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts index 0d14b0def19d4..e9342bf158489 100644 --- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts @@ -57,6 +57,25 @@ reg_audio: regulator-audio { regulator-name = "cs42888_supply"; }; + reg_can_en: regulator-can-en { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can-en"; + gpio = <&pca6416 3 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_can_stby: regulator-can-stby { + compatible = "regulator-fixed"; + regulator-max-microvolt = <3300000>; + regulator-min-microvolt = <3300000>; + regulator-name = "can-stby"; + gpio = <&pca6416 5 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_can_en>; + }; + sound-bt-sco { compatible = "simple-audio-card"; simple-audio-card,bitclock-inversion; @@ -337,6 +356,20 @@ &cm40_intmux { status = "okay"; }; +&flexcan1 { + pinctrl-0 = <&pinctrl_flexcan1>; + pinctrl-names = "default"; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-0 = <&pinctrl_flexcan2>; + pinctrl-names = "default"; + xceiver-supply = <®_can_stby>; + status = "okay"; +}; + &jpegdec { status = "okay"; }; @@ -567,6 +600,20 @@ IMX8QXP_ENET0_RGMII_RXD3_CONN_ENET0_RGMII_RXD3 0x06000020 >; }; + pinctrl_flexcan1: flexcan0grp { + fsl,pins = < + IMX8QXP_FLEXCAN0_TX_ADMA_FLEXCAN0_TX 0x21 + IMX8QXP_FLEXCAN0_RX_ADMA_FLEXCAN0_RX 0x21 + >; + }; + + pinctrl_flexcan2: flexcan1grp { + fsl,pins = < + IMX8QXP_FLEXCAN1_TX_ADMA_FLEXCAN1_TX 0x21 + IMX8QXP_FLEXCAN1_RX_ADMA_FLEXCAN1_RX 0x21 + >; + }; + pinctrl_ioexp_rst: ioexprstgrp { fsl,pins = < IMX8QXP_SPI2_SDO_LSIO_GPIO1_IO01 0x06000021 -- 2.34.1