Re: [PATCH v3 2/2] drm/bridge: sii902x: Set input bus format based on bus-width

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 17/10/2024 10:55, Wadim Egorov wrote:
Introduce a bus-width property to define the number of parallel RGB
input pins connected to the transmitter. The input bus formats are updated
accordingly. If the property is not specified, default to 24-bit bus-width.

Signed-off-by: Wadim Egorov <w.egorov@xxxxxxxxx>
---
v3: Ensure bus_width is set/defaults to 24 even if an endpoint is not defined
---
  drivers/gpu/drm/bridge/sii902x.c | 24 +++++++++++++++++++++++-
  1 file changed, 23 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/bridge/sii902x.c b/drivers/gpu/drm/bridge/sii902x.c
index 7f91b0db161e..9be9cc5b9025 100644
--- a/drivers/gpu/drm/bridge/sii902x.c
+++ b/drivers/gpu/drm/bridge/sii902x.c
@@ -180,6 +180,8 @@ struct sii902x {
  	struct gpio_desc *reset_gpio;
  	struct i2c_mux_core *i2cmux;
  	bool sink_is_hdmi;
+	u32 bus_width;
+
  	/*
  	 * Mutex protects audio and video functions from interfering
  	 * each other, by keeping their i2c command sequences atomic.
@@ -477,6 +479,8 @@ static u32 *sii902x_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
  						     u32 output_fmt,
  						     unsigned int *num_input_fmts)
  {
+
+	struct sii902x *sii902x = bridge_to_sii902x(bridge);
  	u32 *input_fmts;
*num_input_fmts = 0;
@@ -485,7 +489,20 @@ static u32 *sii902x_bridge_atomic_get_input_bus_fmts(struct drm_bridge *bridge,
  	if (!input_fmts)
  		return NULL;
- input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+	switch (sii902x->bus_width) {
+	case 16:
+		input_fmts[0] = MEDIA_BUS_FMT_RGB565_1X16;
+		break;
+	case 18:
+		input_fmts[0] = MEDIA_BUS_FMT_RGB666_1X18;
+		break;
+	case 24:
+		input_fmts[0] = MEDIA_BUS_FMT_RGB888_1X24;
+		break;
+	default:
+		return NULL;
+	}
+
  	*num_input_fmts = 1;
return input_fmts;
@@ -1167,6 +1184,11 @@ static int sii902x_probe(struct i2c_client *client)
  		return PTR_ERR(sii902x->reset_gpio);
  	}
+ sii902x->bus_width = 24;
+	endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 0, -1);
+	if (endpoint)
+		of_property_read_u32(endpoint, "bus-width", &sii902x->bus_width);
+
  	endpoint = of_graph_get_endpoint_by_regs(dev->of_node, 1, -1);
  	if (endpoint) {
  		struct device_node *remote = of_graph_get_remote_port_parent(endpoint);

Reviewed-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx>




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux