Document ITE IT6263 LVDS to HDMI converter. Product link: https://www.ite.com.tw/en/product/cate1/IT6263 Signed-off-by: Liu Ying <victor.liu@xxxxxxx> --- v3: * Reference lvds-dual-ports.yaml. (Dmitry) * Add data-mapping DT property. (Dmitry, Biju) * Allow data-mirror. * Drop ite,lvds-link-num-data-lanes DT property. (Dmitry, Biju) v2: * Document number of LVDS link data lanes. (Biju) * Simplify ports property by dropping "oneOf". (Rob) .../bindings/display/bridge/ite,it6263.yaml | 249 ++++++++++++++++++ 1 file changed, 249 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml new file mode 100644 index 000000000000..8aedbaab5510 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ite,it6263.yaml @@ -0,0 +1,249 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/bridge/ite,it6263.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ITE IT6263 LVDS to HDMI converter + +maintainers: + - Liu Ying <victor.liu@xxxxxxx> + +description: | + The IT6263 is a high-performance single-chip De-SSC(De-Spread Spectrum) LVDS + to HDMI converter. Combined with LVDS receiver and HDMI 1.4a transmitter, + the IT6263 supports LVDS input and HDMI 1.4 output by conversion function. + The built-in LVDS receiver can support single-link and dual-link LVDS inputs, + and the built-in HDMI transmitter is fully compliant with HDMI 1.4a/3D, HDCP + 1.2 and backward compatible with DVI 1.0 specification. + + The IT6263 also encodes and transmits up to 8 channels of I2S digital audio, + with sampling rate up to 192KHz and sample size up to 24 bits. In addition, + an S/PDIF input port takes in compressed audio of up to 192KHz frame rate. + + The newly supported High-Bit Rate(HBR) audio by HDMI specifications v1.3 is + provided by the IT6263 in two interfaces: the four I2S input ports or the + S/PDIF input port. With both interfaces the highest possible HBR frame rate + is supported at up to 768KHz. + +allOf: + - $ref: /schemas/display/lvds-dual-ports.yaml# + +properties: + compatible: + const: ite,it6263 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: audio master clock + + clock-names: + const: mclk + + data-mapping: + enum: + - jeida-18 + - jeida-24 + - jeida-30 + - vesa-24 + - vesa-30 + + data-mirror: true + + reset-gpios: + maxItems: 1 + + ivdd-supply: + description: 1.8V digital logic power + + ovdd-supply: + description: 3.3V I/O pin power + + txavcc18-supply: + description: 1.8V HDMI analog frontend power + + txavcc33-supply: + description: 3.3V HDMI analog frontend power + + pvcc1-supply: + description: 1.8V HDMI frontend core PLL power + + pvcc2-supply: + description: 1.8V HDMI frontend filter PLL power + + avcc-supply: + description: 3.3V LVDS frontend power + + anvdd-supply: + description: 1.8V LVDS frontend analog power + + apvdd-supply: + description: 1.8V LVDS frontend PLL power + + "#sound-dai-cells": + const: 0 + + ite,i2s-audio-fifo-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + items: + enum: [0, 1, 2, 3] + description: + Each array element indicates the pin number of an I2S serial data input + line which is connected to an audio FIFO, from audio FIFO0 to FIFO3. + + ite,rl-channel-swap-audio-sources: + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 4 + uniqueItems: true + items: + enum: [0, 1, 2, 3] + description: + Each array element indicates an audio source whose right channel and left + channel are swapped by this converter. For I2S, the element is the pin + number of an I2S serial data input line. For S/PDIF, the element is always + 0. + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: true + + port@1: true + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: video port for the HDMI output + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: sound input port + + required: + - port@0 + - port@2 + +required: + - compatible + - reg + - data-mapping + - ivdd-supply + - ovdd-supply + - txavcc18-supply + - txavcc33-supply + - pvcc1-supply + - pvcc2-supply + - avcc-supply + - anvdd-supply + - apvdd-supply + +unevaluatedProperties: false + +examples: + - | + /* single-link LVDS input */ + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi@4c { + compatible = "ite,it6263"; + reg = <0x4c>; + data-mapping = "jeida-24"; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + ivdd-supply = <®_buck5>; + ovdd-supply = <®_vext_3v3>; + txavcc18-supply = <®_buck5>; + txavcc33-supply = <®_vext_3v3>; + pvcc1-supply = <®_buck5>; + pvcc2-supply = <®_buck5>; + avcc-supply = <®_vext_3v3>; + anvdd-supply = <®_buck5>; + apvdd-supply = <®_buck5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + it6263_lvds_link1: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + + port@2 { + reg = <2>; + + it6263_out: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; + + - | + /* dual-link LVDS input */ + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + hdmi@4c { + compatible = "ite,it6263"; + reg = <0x4c>; + data-mapping = "jeida-24"; + reset-gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + ivdd-supply = <®_buck5>; + ovdd-supply = <®_vext_3v3>; + txavcc18-supply = <®_buck5>; + txavcc33-supply = <®_vext_3v3>; + pvcc1-supply = <®_buck5>; + pvcc2-supply = <®_buck5>; + avcc-supply = <®_vext_3v3>; + anvdd-supply = <®_buck5>; + apvdd-supply = <®_buck5>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + dual-lvds-odd-pixels; + + it6263_lvds_link1_dual: endpoint { + remote-endpoint = <&ldb_lvds_ch0>; + }; + }; + + port@1 { + reg = <1>; + dual-lvds-even-pixels; + + it6263_lvds_link2_dual: endpoint { + remote-endpoint = <&ldb_lvds_ch1>; + }; + }; + + port@2 { + reg = <2>; + + it6263_out_dual: endpoint { + remote-endpoint = <&hdmi_in>; + }; + }; + }; + }; + }; -- 2.34.1
