Remove the older socfpga_arria10_mercury_pe1.dts, since it is duplicate,
the hardware is covered by the combination of Enclustra's .dtsi files.
The older .dts was limited to only the case of having an Enclustra
Mercury+ AA1 on a Mercury+ PE1 base board, booting from sdmmc. This
functionality is provided also by the generic Enclustra dtsi and dts
files, in particular socfpga_arria10_mercury_aa1_pe1_sdmmc.dts. Since
both .dts files cover the same, the older one is to e replaced in
favor of the more modularized approach.
Signed-off-by: Lothar Rubusch <l.rubusch@xxxxxxxxx>
---
arch/arm/boot/dts/intel/socfpga/Makefile | 1 -
.../socfpga/socfpga_arria10_mercury_pe1.dts | 55 -------------------
2 files changed, 56 deletions(-)
delete mode 100644 arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
diff --git a/arch/arm/boot/dts/intel/socfpga/Makefile b/arch/arm/boot/dts/intel/socfpga/Makefile
index c467828ae..d95862e34 100644
--- a/arch/arm/boot/dts/intel/socfpga/Makefile
+++ b/arch/arm/boot/dts/intel/socfpga/Makefile
@@ -2,7 +2,6 @@
dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += \
socfpga_arria5_socdk.dtb \
socfpga_arria10_chameleonv3.dtb \
- socfpga_arria10_mercury_pe1.dtb \
socfpga_arria10_socdk_nand.dtb \
socfpga_arria10_socdk_qspi.dtb \
socfpga_arria10_socdk_sdmmc.dtb \
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
deleted file mode 100644
index cf533f76a..000000000
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_arria10_mercury_pe1.dts
+++ /dev/null
@@ -1,55 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Copyright 2023 Steffen Trumtrar <kernel@xxxxxxxxxxxxxx>
- */
-/dts-v1/;
-#include "socfpga_arria10_mercury_aa1.dtsi"
-
-/ {
- model = "Enclustra Mercury+ PE1";
- compatible = "enclustra,mercury-pe1", "enclustra,mercury-aa1",
- "altr,socfpga-arria10", "altr,socfpga";
-
- aliases {
- ethernet0 = &gmac0;
- serial0 = &uart0;
- serial1 = &uart1;
- };
-};
-
-&gmac0 {
- status = "okay";
-};
-
-&gpio0 {
- status = "okay";
-};
-
-&gpio1 {
- status = "okay";
-};
-
-&gpio2 {
- status = "okay";
-};
-
-&i2c1 {
- status = "okay";
-};
-
-&mmc {
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&usb0 {
- status = "okay";
- dr_mode = "host";
-};
--
2.25.1
