Hi Cristian,
On 2024-10-19 12:12, Cristian Ciocaltea wrote:
> Add the necessary DT changes to enable HDMI0 on Radxa ROCK 5A.
>
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 52 ++++++++++++++++++++++++
> 1 file changed, 52 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> index 87fce8d9a964cd53d179ce214ae1c0ff505a2dce..2b141af5e709b0bc2193dbfb2327e6bc1fdaa502 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
> @@ -5,6 +5,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/leds/common.h>
> #include <dt-bindings/pinctrl/rockchip.h>
> +#include <dt-bindings/soc/rockchip,vop2.h>
> #include "rk3588s.dtsi"
>
> / {
> @@ -35,6 +36,17 @@ chosen {
> stdout-path = "serial2:1500000n8";
> };
>
> + hdmi0-con {
> + compatible = "hdmi-connector";
> + type = "a";
ROCK 5A use micro HDMI connector type, so this should be type = "d".
Regards,
Jonas
> +
> + port {
> + hdmi0_con_in: endpoint {
> + remote-endpoint = <&hdmi0_out_con>;
> + };
> + };
> + };
> +
[snip]
