Add device tree bindings documentation for Qualcomm MSM8917 pinctrl driver. Signed-off-by: Barnabás Czémán <barnabas.czeman@xxxxxxxxxxxxxx> --- .../bindings/pinctrl/qcom,msm8917-pinctrl.yaml | 155 +++++++++++++++++++++ 1 file changed, 155 insertions(+) diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml new file mode 100644 index 0000000000000000000000000000000000000000..41349ce9898aaaf68a10f30ffe611dcedc1e9311 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/qcom,msm8917-pinctrl.yaml @@ -0,0 +1,155 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pinctrl/qcom,msm8917-pinctrl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm MSM8917 TLMM pin controller + +maintainers: + - Barnabas Czeman <barnabas.czeman@xxxxxxxxxxxxxx> + +description: + Top Level Mode Multiplexer pin controller in Qualcomm MSM8917 SoC. + +properties: + compatible: + const: qcom,msm8917-pinctrl + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-reserved-ranges: true + +patternProperties: + "-state$": + oneOf: + - $ref: "#/$defs/qcom-msm8917-tlmm-state" + - patternProperties: + "-pins$": + $ref: "#/$defs/qcom-msm8917-tlmm-state" + additionalProperties: false + +$defs: + qcom-msm8917-tlmm-state: + type: object + description: + Pinctrl node's client devices use subnodes for desired pin configuration. + Client device subnodes use below standard properties. + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state + unevaluatedProperties: false + + properties: + pins: + description: + List of gpio pins affected by the properties specified in this + subnode. + items: + oneOf: + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-3][0-9]|14[01])$" + - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, + sdc2_cmd, sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, + qdsd_data1, qdsd_data2, qdsd_data3 ] + minItems: 1 + maxItems: 16 + + function: + description: + Specify the alternative function to be configured for the specified + pins. + + enum: [ accel_int, adsp_ext, alsp_int, atest_bbrx0, atest_bbrx1, + atest_char, atest_char0, atest_char1, atest_char2, + atest_char3, atest_combodac_to_gpio_native, + atest_gpsadc_dtest0_native, atest_gpsadc_dtest1_native, + atest_tsens, atest_wlan0, atest_wlan1, audio_ref, + audio_reset, bimc_dte0, bimc_dte1, blsp6_spi, blsp8_spi, + blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, + blsp_i2c6, blsp_i2c7, blsp_i2c8, blsp_spi1, blsp_spi2, + blsp_spi3, blsp_spi4, blsp_spi5, blsp_spi6, blsp_spi7, + blsp_spi8, blsp_uart1, blsp_uart2, blsp_uart3, blsp_uart4, + blsp_uart5, blsp_uart6, blsp_uart7, blsp_uart8, cam0_ldo, + cam1_rst, cam1_standby, cam2_rst, cam2_standby, cam_mclk, + cci_async, cci_i2c, cci_timer0, cci_timer1, cdc_pdm0, + codec_int1, codec_int2, codec_mad, coex_uart, cri_trng, + cri_trng0, cri_trng1, dbg_out, dmic0_clk, dmic0_data, + ebi_cdc, ebi_ch0, ext_lpass, forced_usb, fp_gpio, fp_int, + gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, + gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gpio, + gsm0_tx, key_focus, key_snapshot, key_volp, ldo_en, + ldo_update, lpass_slimbus, lpass_slimbus0, lpass_slimbus1, + m_voc, mag_int, mdp_vsync, mipi_dsi0, modem_tsync, nav_pps, + nav_pps_in_a, nav_pps_in_b, nav_tsync, nfc_pwr, ov_ldo, + pa_indicator, pbs0, pbs1, pbs2, pri_mi2s, pri_mi2s_mclk_a, + pri_mi2s_mclk_b, pri_mi2s_ws, prng_rosc, + pwr_crypto_enabled_a, pwr_crypto_enabled_b, + pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, + pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, + qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1, + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a, + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b, + qdss_tracedata_a, qdss_tracedata_b, sd_write, sdcard_det, + sec_mi2s, sec_mi2s_mclk_a, sec_mi2s_mclk_b, sensor_rst, + smb_int, ssbi_wtr1, ts_resout, ts_sample, uim1_clk, + uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data, + uim2_present, uim2_reset, uim_batt, us_emitter, us_euro, + wcss_bt, wcss_fm, wcss_wlan, wcss_wlan0, wcss_wlan1, + wcss_wlan2, webcam_rst, webcam_standby, wsa_io, wsa_irq ] + + required: + - pins + +allOf: + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# + +required: + - compatible + - reg + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + tlmm: pinctrl@1000000 { + compatible = "qcom,msm8917-pinctrl"; + reg = <0x01000000 0x300000>; + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; + gpio-controller; + gpio-ranges = <&tlmm 0 0 134>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + + blsp1-uart2-sleep-state { + pins = "gpio4", "gpio5"; + function = "gpio"; + + drive-strength = <2>; + bias-pull-down; + }; + + spi1-default-state { + spi-pins { + pins = "gpio0", "gpio1", "gpio3"; + function = "blsp_spi1"; + + drive-strength = <12>; + bias-disable; + }; + + cs-pins { + pins = "gpio2"; + function = "gpio"; + + drive-strength = <16>; + bias-disable; + output-high; + }; + }; + }; -- 2.47.0
