Re: [PATCH v2] rpmsg: qcom_smd: Improve error handling for qcom_smd_parse_edge

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Donnerstag, 6. Juni 2024 21:01:36 MESZ Luca Weiss wrote:
> When the mailbox driver has not probed yet, the error message "failed to
> parse smd edge" is just going to confuse users, so improve the error
> prints a bit.
> 
> Cover the last remaining exits from qcom_smd_parse_edge with proper
> error prints, especially the one for the mbox_chan deserved
> dev_err_probe to handle EPROBE_DEFER nicely. And add one for ipc_regmap
> also to be complete.
> 
> With this done, we can remove the outer print completely.

Ping, looks like this is still pending.

Regards
Luca

> 
> Signed-off-by: Luca Weiss <luca@xxxxxxxxx>
> ---
> Changes in v2:
> - Rebase on qcom for-next, drop dts patches which have been applied
> - Improve error printing situation (Bjorn)
> - Link to v1: https://lore.kernel.org/r/20240424-apcs-mboxes-v1-0-6556c47cb501@xxxxxxxxx
> ---
>  drivers/rpmsg/qcom_smd.c | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/rpmsg/qcom_smd.c b/drivers/rpmsg/qcom_smd.c
> index 43f601c84b4f..06e6ba653ea1 100644
> --- a/drivers/rpmsg/qcom_smd.c
> +++ b/drivers/rpmsg/qcom_smd.c
> @@ -1369,7 +1369,8 @@ static int qcom_smd_parse_edge(struct device *dev,
>  	edge->mbox_chan = mbox_request_channel(&edge->mbox_client, 0);
>  	if (IS_ERR(edge->mbox_chan)) {
>  		if (PTR_ERR(edge->mbox_chan) != -ENODEV) {
> -			ret = PTR_ERR(edge->mbox_chan);
> +			ret = dev_err_probe(dev, PTR_ERR(edge->mbox_chan),
> +					    "failed to acquire IPC mailbox\n");
>  			goto put_node;
>  		}
>  
> @@ -1386,6 +1387,7 @@ static int qcom_smd_parse_edge(struct device *dev,
>  		of_node_put(syscon_np);
>  		if (IS_ERR(edge->ipc_regmap)) {
>  			ret = PTR_ERR(edge->ipc_regmap);
> +			dev_err(dev, "failed to get regmap from syscon: %d\n", ret);
>  			goto put_node;
>  		}
>  
> @@ -1501,10 +1503,8 @@ struct qcom_smd_edge *qcom_smd_register_edge(struct device *parent,
>  	}
>  
>  	ret = qcom_smd_parse_edge(&edge->dev, node, edge);
> -	if (ret) {
> -		dev_err(&edge->dev, "failed to parse smd edge\n");
> +	if (ret)
>  		goto unregister_dev;
> -	}
>  
>  	ret = qcom_smd_create_chrdev(edge);
>  	if (ret) {
> 
> ---
> base-commit: 2c79712cc83b172ce26c3086ced1c1fae087d8fb
> change-id: 20240423-apcs-mboxes-12ee6c01a5b3
> 
> Best regards,
> 








[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux