Add the necessary DT changes to enable HDMI0 on Rockchip RK3588 EVB1. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@xxxxxxxxxxxxx> --- arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts | 47 ++++++++++++++++++++++++ 1 file changed, 47 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts index df44dbc394ca54fac61664fc3c647cf8e1189dff..863a73b0e3da73150d2874abc5762ab0c4c0ce63 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-evb1-v10.dts @@ -9,6 +9,7 @@ #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> #include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> #include <dt-bindings/usb/pd.h> #include "rk3588.dtsi" @@ -120,6 +121,17 @@ backlight: backlight { pwms = <&pwm2 0 25000 0>; }; + hdmi0-con { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi0_con_in: endpoint { + remote-endpoint = <&hdmi0_out_con>; + }; + }; + }; + pcie20_avdd0v85: pcie20-avdd0v85-regulator { compatible = "regulator-fixed"; regulator-name = "pcie20_avdd0v85"; @@ -300,6 +312,26 @@ &gpu { status = "okay"; }; +&hdmi0 { + status = "okay"; +}; + +&hdmi0_in { + hdmi0_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi0>; + }; +}; + +&hdmi0_out { + hdmi0_out_con: endpoint { + remote-endpoint = <&hdmi0_con_in>; + }; +}; + +&hdptxphy_hdmi0 { + status = "okay"; +}; + &i2c2 { status = "okay"; @@ -1256,3 +1288,18 @@ &usb_host1_xhci { dr_mode = "host"; status = "okay"; }; + +&vop_mmu { + status = "okay"; +}; + +&vop { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi0_in_vp0>; + }; +}; -- 2.47.0