Bindings expect pin configuration nodes in pinctrl to match certain
naming and not be part of another fake node:
pinctrl@30330000: '...' does not match any of the regexes: 'grp$', 'pinctrl-[0-9]+'
Drop the wrapping node and adjust the names to have "grp" prefix.
Diff looks big but this should have no functional impact, use e.g.
git show -w to view the diff.
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Conor Dooley <conor+dt@xxxxxxxxxx>
Cc: Dong Aisheng <aisheng.dong@xxxxxxx>
Cc: Fabio Estevam <festevam@xxxxxxxxx>
Cc: Jacky Bai <ping.bai@xxxxxxx>
Cc: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx>
Cc: Rob Herring <robh@xxxxxxxxxx>
Cc: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
Cc: devicetree@xxxxxxxxxxxxxxx
Cc: imx@xxxxxxxxxxxxxxx
Cc: kernel@xxxxxxxxxxxxxxxxxx
Cc: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
Cc: linux-gpio@xxxxxxxxxxxxxxx
---
V2: New patch
---
arch/arm/boot/dts/nxp/imx/imx50-evk.dts | 62 ++++++++++++-------------
1 file changed, 30 insertions(+), 32 deletions(-)
diff --git a/arch/arm/boot/dts/nxp/imx/imx50-evk.dts b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
index 3f45c01d9cce3..f40b0d5fdb85f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx50-evk.dts
@@ -52,40 +52,38 @@ &fec {
};
&iomuxc {
- imx50-evk {
- pinctrl_cspi: cspigrp {
- fsl,pins = <
- MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00
- MX50_PAD_CSPI_MISO__CSPI_MISO 0x00
- MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00
- MX50_PAD_CSPI_SS0__GPIO4_11 0xc4
- MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84
- >;
- };
+ pinctrl_cspi: cspigrp {
+ fsl,pins = <
+ MX50_PAD_CSPI_SCLK__CSPI_SCLK 0x00
+ MX50_PAD_CSPI_MISO__CSPI_MISO 0x00
+ MX50_PAD_CSPI_MOSI__CSPI_MOSI 0x00
+ MX50_PAD_CSPI_SS0__GPIO4_11 0xc4
+ MX50_PAD_ECSPI1_MOSI__GPIO4_13 0x84
+ >;
+ };
- pinctrl_fec: fecgrp {
- fsl,pins = <
- MX50_PAD_SSI_RXFS__FEC_MDC 0x80
- MX50_PAD_SSI_RXC__FEC_MDIO 0x80
- MX50_PAD_DISP_D0__FEC_TX_CLK 0x80
- MX50_PAD_DISP_D1__FEC_RX_ERR 0x80
- MX50_PAD_DISP_D2__FEC_RX_DV 0x80
- MX50_PAD_DISP_D3__FEC_RDATA_1 0x80
- MX50_PAD_DISP_D4__FEC_RDATA_0 0x80
- MX50_PAD_DISP_D5__FEC_TX_EN 0x80
- MX50_PAD_DISP_D6__FEC_TDATA_1 0x80
- MX50_PAD_DISP_D7__FEC_TDATA_0 0x80
- >;
- };
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX50_PAD_SSI_RXFS__FEC_MDC 0x80
+ MX50_PAD_SSI_RXC__FEC_MDIO 0x80
+ MX50_PAD_DISP_D0__FEC_TX_CLK 0x80
+ MX50_PAD_DISP_D1__FEC_RX_ERR 0x80
+ MX50_PAD_DISP_D2__FEC_RX_DV 0x80
+ MX50_PAD_DISP_D3__FEC_RDATA_1 0x80
+ MX50_PAD_DISP_D4__FEC_RDATA_0 0x80
+ MX50_PAD_DISP_D5__FEC_TX_EN 0x80
+ MX50_PAD_DISP_D6__FEC_TDATA_1 0x80
+ MX50_PAD_DISP_D7__FEC_TDATA_0 0x80
+ >;
+ };
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4
- MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4
- MX50_PAD_UART1_RTS__UART1_RTS 0x1e4
- MX50_PAD_UART1_CTS__UART1_CTS 0x1e4
- >;
- };
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX50_PAD_UART1_TXD__UART1_TXD_MUX 0x1e4
+ MX50_PAD_UART1_RXD__UART1_RXD_MUX 0x1e4
+ MX50_PAD_UART1_RTS__UART1_RTS 0x1e4
+ MX50_PAD_UART1_CTS__UART1_CTS 0x1e4
+ >;
};
};
--
2.45.2
