From: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
Aurelien reported probe failures due to the csi node being enabled
without having a camera attached to it. A camera was in the initial
submissions, but was removed from the dts, as it had not actually been
present on the board, but was from an addon board used by the
developer of the relevant drivers. The non-camera pipeline nodes were
not disabled when this happened and the probe failures are problematic
for Debian. Disable them.
CC: stable@xxxxxxxxxxxxxxx
Fixes: 28ecaaa5af192 ("riscv: dts: starfive: jh7110: Add camera subsystem nodes")
Closes: https://lore.kernel.org/all/Zw1-vcN4CoVkfLjU@xxxxxxxxxxx/
Reported-by: Aurelien Jarno <aurelien@xxxxxxxxxxx>
Signed-off-by: Conor Dooley <conor.dooley@xxxxxxxxxxxxx>
---
CC: Emil Renner Berthing <kernel@xxxxxxxx>
CC: Rob Herring <robh@xxxxxxxxxx>
CC: Krzysztof Kozlowski <krzk+dt@xxxxxxxxxx>
CC: Conor Dooley <conor+dt@xxxxxxxxxx>
CC: Changhuang Liang <changhuang.liang@xxxxxxxxxxxxxxxx>
CC: devicetree@xxxxxxxxxxxxxxx
CC: linux-riscv@xxxxxxxxxxxxxxxxxxx
CC: linux-kernel@xxxxxxxxxxxxxxx
---
arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 --
1 file changed, 2 deletions(-)
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index c7771b3b64758..d6c55f1cc96a9 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -128,7 +128,6 @@ &camss {
assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
<&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
assigned-clock-rates = <49500000>, <198000000>;
- status = "okay";
ports {
#address-cells = <1>;
@@ -151,7 +150,6 @@ camss_from_csi2rx: endpoint {
&csi2rx {
assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
assigned-clock-rates = <297000000>;
- status = "okay";
ports {
#address-cells = <1>;
--
2.45.2
