Hi folks, This series adds initial support for the Samsung Galaxy S20 Series and also initial board support for the Samsung Galaxy S20 5G (SM-G981B) codenamed x1s. The S20 Series feature a lot of similarities in their configuration and internally Samsung named the common devicetrees in their downstream kernel 'hubble', please note hubble excludes the S20 FE series and Note20 series. The device trees have been tested with dtbs_check W=1 and results in no warnings. This initial bringup consists of: * pinctrl * gpio-keys * simple-framebuffer This is enough to reach a shell in an initramfs. More platform support will be added in the future. Just like SM-N981B, the preferred way to boot the upstream kernel is by using a shim bootloader, called uniLoader [1], which works around some issues with the stock, non-replacable Samsung S-LK bootloader. For example, the stock bootloader leaves the decon trigger control unset, which causes the framebuffer not to refresh. Device functionality depends on the patch series from Igor Belwon: "Add minimal Exynos990 SoC and SM-N981B support" [1] https://github.com/ivoszbg/uniLoader Umer Uddin (3): dt-bindings: arm: samsung: samsung-boards: Add bindings for SM-G981B board arm64: dts: exynos: Add initial support for Samsung Galaxy S20 Series boards (hubble) arm64: dts: exynos: Add initial support for Samsung Galaxy S20 5G (x1s) .../bindings/arm/samsung/samsung-boards.yaml | 1 + arch/arm64/boot/dts/exynos/Makefile | 1 + .../dts/exynos/exynos990-hubble-common.dtsi | 109 ++++++++++++++++++ arch/arm64/boot/dts/exynos/exynos990-x1s.dts | 23 ++++ 4 files changed, 134 insertions(+) create mode 100644 arch/arm64/boot/dts/exynos/exynos990-hubble-common.dtsi create mode 100644 arch/arm64/boot/dts/exynos/exynos990-x1s.dts -- 2.46.2
