This patchset adds support for the Random Number Generator(RNG) present on the stm32mp25x platforms. On these platforms, the clock management and the RNG parameters are different. While there, update the RNG max clock frequency on stm32mp15 platforms according to the latest specs. Tested on the stm32mp257f-ev1 platform with a deep power sequence with rngtest before/after the sequence with satisfying results. Same was done on stm32mp135f-dk to make sure no regression was added. On stm32mp157c-dk2, I didn't perform a power sequence but the rngtest results were satisfying. Signed-off-by: Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx> --- Changes in v4: - Changed the restrictions on clock names per compatible - Link to v3: https://lore.kernel.org/r/20241015-rng-mp25-v2-v3-0-87630d73e5eb@xxxxxxxxxxx Changes in v3: - Add restriction on clock-names some compatibles - Use clk_bulk APIs in the RNG driver to avoid manually handling clocks. - Link to v2: https://lore.kernel.org/r/20241011-rng-mp25-v2-v2-0-76fd6170280c@xxxxxxxxxxx Changes in V2: -Fixes in bindings -Removed MP25 RNG example -Renamed RNG clocks for mp25 to "core" and "bus" --- Gatien Chevallier (4): dt-bindings: rng: add st,stm32mp25-rng support hwrng: stm32 - implement support for STM32MP25x platforms hwrng: stm32 - update STM32MP15 RNG max clock frequency arm64: dts: st: add RNG node on stm32mp251 .../devicetree/bindings/rng/st,stm32-rng.yaml | 28 +++++++- arch/arm64/boot/dts/st/stm32mp251.dtsi | 10 +++ drivers/char/hw_random/stm32-rng.c | 76 ++++++++++++++++------ 3 files changed, 94 insertions(+), 20 deletions(-) --- base-commit: 8e929cb546ee42c9a61d24fae60605e9e3192354 change-id: 20241011-rng-mp25-v2-b6460ef11e1f Best regards, -- Gatien Chevallier <gatien.chevallier@xxxxxxxxxxx>
