Add device-tree bindings for the ATH12K module found in the IPQ5332 device. Signed-off-by: Raj Kumar Bhagat <quic_rajkbhag@xxxxxxxxxxx> --- .../net/wireless/qcom,ath12k-ahb.yaml | 293 ++++++++++++++++++ 1 file changed, 293 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml diff --git a/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml new file mode 100644 index 000000000000..54784e396d7e --- /dev/null +++ b/Documentation/devicetree/bindings/net/wireless/qcom,ath12k-ahb.yaml @@ -0,0 +1,293 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/wireless/qcom,ath12k-ahb.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies ath12k wireless devices (AHB) + +maintainers: + - Kalle Valo <kvalo@xxxxxxxxxx> + - Jeff Johnson <jjohnson@xxxxxxxxxx> + +description: + Qualcomm Technologies IEEE 802.11be AHB devices. + +properties: + compatible: + enum: + - qcom,ipq5332-wifi + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock used for copy engine + + clock-names: + items: + - const: gcc_xo_clk + + interrupts: + items: + - description: Ready interrupt + - description: Spawn acknowledge interrupt + - description: Stop acknowledge interrupt + - description: misc-pulse1 interrupt events + - description: misc-latch interrupt events + - description: sw exception interrupt events + - description: interrupt event for ring CE0 + - description: interrupt event for ring CE1 + - description: interrupt event for ring CE2 + - description: interrupt event for ring CE3 + - description: interrupt event for ring CE4 + - description: interrupt event for ring CE5 + - description: interrupt event for ring CE6 + - description: interrupt event for ring CE7 + - description: interrupt event for ring CE8 + - description: interrupt event for ring CE9 + - description: interrupt event for ring CE10 + - description: interrupt event for ring CE11 + - description: interrupt event for ring host2wbm-desc-feed + - description: interrupt event for ring host2reo-re-injection + - description: interrupt event for ring host2reo-command + - description: interrupt event for ring host2rxdma-monitor-ring1 + - description: interrupt event for ring reo2ost-exception + - description: interrupt event for ring wbm2host-rx-release + - description: interrupt event for ring reo2host-status + - description: interrupt event for ring reo2host-destination-ring4 + - description: interrupt event for ring reo2host-destination-ring3 + - description: interrupt event for ring reo2host-destination-ring2 + - description: interrupt event for ring reo2host-destination-ring1 + - description: interrupt event for ring rxdma2host-monitor-destination-mac3 + - description: interrupt event for ring rxdma2host-monitor-destination-mac2 + - description: interrupt event for ring rxdma2host-monitor-destination-mac1 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac3 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac2 + - description: interrupt event for ring host2rxdma-host-buf-ring-mac1 + - description: interrupt event for ring host2tcl-input-ring4 + - description: interrupt event for ring host2tcl-input-ring3 + - description: interrupt event for ring host2tcl-input-ring2 + - description: interrupt event for ring host2tcl-input-ring1 + - description: interrupt event for ring wbm2host-tx-completions-ring4 + - description: interrupt event for ring wbm2host-tx-completions-ring3 + - description: interrupt event for ring wbm2host-tx-completions-ring2 + - description: interrupt event for ring wbm2host-tx-completions-ring1 + - description: interrupt event for ring host2tx-monitor-ring1 + - description: interrupt event for ring txmon2host-monitor-destination-mac3 + - description: interrupt event for ring txmon2host-monitor-destination-mac2 + - description: interrupt event for ring txmon2host-monitor-destination-mac1 + - description: interrupt event for umac_reset + + interrupt-names: + items: + - const: ready + - const: spawn + - const: stop-ack + - const: misc-pulse1 + - const: misc-latch + - const: sw-exception + - const: ce0 + - const: ce1 + - const: ce2 + - const: ce3 + - const: ce4 + - const: ce5 + - const: ce6 + - const: ce7 + - const: ce8 + - const: ce9 + - const: ce10 + - const: ce11 + - const: host2wbm-desc-feed + - const: host2reo-re-injection + - const: host2reo-command + - const: host2rxdma-monitor-ring1 + - const: reo2ost-exception + - const: wbm2host-rx-release + - const: reo2host-status + - const: reo2host-destination-ring4 + - const: reo2host-destination-ring3 + - const: reo2host-destination-ring2 + - const: reo2host-destination-ring1 + - const: rxdma2host-monitor-destination-mac3 + - const: rxdma2host-monitor-destination-mac2 + - const: rxdma2host-monitor-destination-mac1 + - const: host2rxdma-host-buf-ring-mac3 + - const: host2rxdma-host-buf-ring-mac2 + - const: host2rxdma-host-buf-ring-mac1 + - const: host2tcl-input-ring4 + - const: host2tcl-input-ring3 + - const: host2tcl-input-ring2 + - const: host2tcl-input-ring1 + - const: wbm2host-tx-completions-ring4 + - const: wbm2host-tx-completions-ring3 + - const: wbm2host-tx-completions-ring2 + - const: wbm2host-tx-completions-ring1 + - const: host2tx-monitor-ring1 + - const: txmon2host-monitor-destination-mac3 + - const: txmon2host-monitor-destination-mac2 + - const: txmon2host-monitor-destination-mac1 + - const: umac_reset + + memory-region: + minItems: 1 + description: + phandle to a node describing reserved memory (System RAM memory) + used by ath12k firmware (see bindings/reserved-memory/reserved-memory.txt) + + qcom,rproc: + $ref: /schemas/types.yaml#/definitions/phandle + description: + DT entry of a WCSS node. WCSS node is the child node of q6 remoteproc driver. + (see bindings/remoteproc/qcom,multipd-pil.yaml) + + qcom,smem-states: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: States used by the AP to signal the remote processor + items: + - description: Shutdown WCSS pd + - description: Stop WCSS pd + - description: Spawn WCSS pd + + qcom,smem-state-names: + description: + Names of the states used by the AP to signal the remote processor + items: + - const: shutdown + - const: stop + - const: spawn + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + - interrupt-names + - memory-region + - qcom,rproc + - qcom,smem-states + - qcom,smem-state-names + +additionalProperties: false + +examples: + - | + + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/qcom,ipq5332-gcc.h> + + wifi0: wifi@c0000000 { + compatible = "qcom,ipq5332-wifi"; + reg = <0xc000000 0x1000000>; + clocks = <&gcc GCC_XO_CLK>; + clock-names = "gcc_xo_clk"; + interrupts-extended = <&wcss_smp2p_in 9 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 12 IRQ_TYPE_NONE>, + <&wcss_smp2p_in 11 IRQ_TYPE_NONE>, + <&intc GIC_SPI 559 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 560 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 561 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 422 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 423 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 424 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 425 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 426 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 427 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 428 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 429 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 430 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 431 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 432 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 433 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 491 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 495 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 493 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 544 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 457 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 466 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 497 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 454 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 453 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 452 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 451 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 488 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 484 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 554 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 549 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 507 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 500 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 499 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 498 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 450 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 449 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 448 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 447 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 543 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 486 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 482 IRQ_TYPE_EDGE_RISING>, + <&intc GIC_SPI 419 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "ready", + "spawn", + "stop-ack", + "misc-pulse1", + "misc-latch", + "sw-exception", + "ce0", + "ce1", + "ce2", + "ce3", + "ce4", + "ce5", + "ce6", + "ce7", + "ce8", + "ce9", + "ce10", + "ce11", + "host2wbm-desc-feed", + "host2reo-re-injection", + "host2reo-command", + "host2rxdma-monitor-ring1", + "reo2ost-exception", + "wbm2host-rx-release", + "reo2host-status", + "reo2host-destination-ring4", + "reo2host-destination-ring3", + "reo2host-destination-ring2", + "reo2host-destination-ring1", + "rxdma2host-monitor-destination-mac3", + "rxdma2host-monitor-destination-mac2", + "rxdma2host-monitor-destination-mac1", + "host2rxdma-host-buf-ring-mac3", + "host2rxdma-host-buf-ring-mac2", + "host2rxdma-host-buf-ring-mac1", + "host2tcl-input-ring4", + "host2tcl-input-ring3", + "host2tcl-input-ring2", + "host2tcl-input-ring1", + "wbm2host-tx-completions-ring4", + "wbm2host-tx-completions-ring3", + "wbm2host-tx-completions-ring2", + "wbm2host-tx-completions-ring1", + "host2tx-monitor-ring1", + "txmon2host-monitor-destination-mac3", + "txmon2host-monitor-destination-mac2", + "txmon2host-monitor-destination-mac1", + "umac_reset"; + + memory-region = <&q6_region>; + qcom,rproc = <&q6v5_wcss>; + qcom,smem-states = <&wcss_smp2p_out 8>, + <&wcss_smp2p_out 9>, + <&wcss_smp2p_out 10>; + qcom,smem-state-names = "shutdown", + "stop", + "spawn"; + }; -- 2.34.1
