Current behavior splits the buffer/sg in n * STM32_DMA3_MAX_BLOCK_SIZE + 1
for the remainder without optimization.
New behavior splits the buffer/sg in n * STM32_DMA3_MAX_BLOCK_SIZE + 1 for
(x * chan->max_burst) + 1 for the remainder.
Depending on channel FIFO size, optimal double-word (word if only 8-byte
FIFO size) bursts can be programmed before managing the very last remainder
with lower data width.
In case of _prep_slave_sg, and depending on the channel Transfer Complete
event configuration, the user is warned about the refactored linked-list,
not having the same items count than the initial sg_list. This warning is
shown only if the configuration is successful.
Signed-off-by: Amelie Delaunay <amelie.delaunay@xxxxxxxxxxx>
---
drivers/dma/stm32/stm32-dma3.c | 40 +++++++++++++++++++++++++++++++++-------
1 file changed, 33 insertions(+), 7 deletions(-)
diff --git a/drivers/dma/stm32/stm32-dma3.c b/drivers/dma/stm32/stm32-dma3.c
index f793eecd2c27ca17cedd5cabbaa1b1beca202039..1d961f5935f935e3855467318cdcde6e6173e43c 100644
--- a/drivers/dma/stm32/stm32-dma3.c
+++ b/drivers/dma/stm32/stm32-dma3.c
@@ -1126,6 +1126,25 @@ static void stm32_dma3_free_chan_resources(struct dma_chan *c)
chan->config_set = 0;
}
+static u32 stm32_dma3_get_ll_count(struct stm32_dma3_chan *chan, size_t len)
+{
+ u32 count;
+
+ count = len / STM32_DMA3_MAX_BLOCK_SIZE;
+ len -= (len / STM32_DMA3_MAX_BLOCK_SIZE) * STM32_DMA3_MAX_BLOCK_SIZE;
+
+ if (len >= chan->max_burst) {
+ count += 1; /* len < STM32_DMA3_MAX_BLOCK_SIZE here, so it fits in one item */
+ len -= (len / chan->max_burst) * chan->max_burst;
+ }
+
+ /* Unaligned remainder fits in one extra item */
+ if (len > 0)
+ count += 1;
+
+ return count;
+}
+
static void stm32_dma3_init_chan_config_for_memcpy(struct stm32_dma3_chan *chan,
dma_addr_t dst, dma_addr_t src)
{
@@ -1161,7 +1180,7 @@ static struct dma_async_tx_descriptor *stm32_dma3_prep_dma_memcpy(struct dma_cha
size_t next_size, offset;
u32 count, i, ctr1, ctr2;
- count = DIV_ROUND_UP(len, STM32_DMA3_MAX_BLOCK_SIZE);
+ count = stm32_dma3_get_ll_count(chan, len);
swdesc = stm32_dma3_chan_desc_alloc(chan, count);
if (!swdesc)
@@ -1177,6 +1196,9 @@ static struct dma_async_tx_descriptor *stm32_dma3_prep_dma_memcpy(struct dma_cha
remaining = len - offset;
next_size = min_t(size_t, remaining, STM32_DMA3_MAX_BLOCK_SIZE);
+ if (next_size < STM32_DMA3_MAX_BLOCK_SIZE && next_size >= chan->max_burst)
+ next_size = chan->max_burst * (remaining / chan->max_burst);
+
ret = stm32_dma3_chan_prep_hw(chan, DMA_MEM_TO_MEM, &swdesc->ccr, &ctr1, &ctr2,
src + offset, dst + offset, next_size);
if (ret)
@@ -1215,12 +1237,9 @@ static struct dma_async_tx_descriptor *stm32_dma3_prep_slave_sg(struct dma_chan
u32 i, j, count, ctr1, ctr2;
int ret;
- count = sg_len;
- for_each_sg(sgl, sg, sg_len, i) {
- len = sg_dma_len(sg);
- if (len > STM32_DMA3_MAX_BLOCK_SIZE)
- count += DIV_ROUND_UP(len, STM32_DMA3_MAX_BLOCK_SIZE) - 1;
- }
+ count = 0;
+ for_each_sg(sgl, sg, sg_len, i)
+ count += stm32_dma3_get_ll_count(chan, sg_dma_len(sg));
swdesc = stm32_dma3_chan_desc_alloc(chan, count);
if (!swdesc)
@@ -1237,6 +1256,9 @@ static struct dma_async_tx_descriptor *stm32_dma3_prep_slave_sg(struct dma_chan
do {
size_t chunk = min_t(size_t, len, STM32_DMA3_MAX_BLOCK_SIZE);
+ if (chunk < STM32_DMA3_MAX_BLOCK_SIZE && chunk >= chan->max_burst)
+ chunk = chan->max_burst * (len / chan->max_burst);
+
if (dir == DMA_MEM_TO_DEV) {
src = sg_addr;
dst = dev_addr;
@@ -1269,6 +1291,10 @@ static struct dma_async_tx_descriptor *stm32_dma3_prep_slave_sg(struct dma_chan
} while (len);
}
+ if (count != sg_len && chan->tcem != CTR2_TCEM_CHANNEL)
+ dev_warn(chan2dev(chan), "Linked-list refactored, %d items instead of %d\n",
+ count, sg_len);
+
/* Enable Error interrupts */
swdesc->ccr |= CCR_USEIE | CCR_ULEIE | CCR_DTEIE;
/* Enable Transfer state interrupts */
--
2.25.1
