Add 'ports' and sub node 'port' properties to specify connectors on the
High-Speed/Super-Speed data bus, or Sideband Use (SBU) AUX lines
endpoints of the USB controller.
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
.../bindings/usb/mediatek,mt6360-tcpc.yaml | 21 +++++++++++++++++++
1 file changed, 21 insertions(+)
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
index 053264e60583..5b6ea0d734ea 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mt6360-tcpc.yaml
@@ -32,6 +32,27 @@ properties:
description:
Properties for usb c connector.
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+ description:
+ Any connector to the data bus of this controller should be specified.
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "port@[0-2]$":
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ It could be one of the following interface types. High-Speed
+ (HS) data bus endpoint to the Type-C connector, SuperSpeed (SS)
+ data bus endpoint to the Type-C connector, or Sideband Use (SBU)
+ AUX lines endpoint to the Type-C connector for the purpose of
+ handling altmode muxing and orientation switching.
+
additionalProperties: false
required:
--
2.45.2
