[PATCH 2/2] phy: rockchip-naneng-combo: Support rk3576

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Kever Yang <kever.yang@xxxxxxxxxxxxxx>

phy0: pcie, sata
phy1: pcie, sata, usb3

Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
Signed-off-by: William Wu <william.wu@xxxxxxxxxxxxxx>
Signed-off-by: Frank Wang <frank.wang@xxxxxxxxxxxxxx>
---
 .../rockchip/phy-rockchip-naneng-combphy.c    | 202 ++++++++++++++++++
 1 file changed, 202 insertions(+)

diff --git a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
index 0a9989e41237..4c41317a8041 100644
--- a/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
+++ b/drivers/phy/rockchip/phy-rockchip-naneng-combphy.c
@@ -98,6 +98,7 @@ struct rockchip_combphy_grfcfg {
 	struct combphy_reg pipe_rxterm_set;
 	struct combphy_reg pipe_txelec_set;
 	struct combphy_reg pipe_txcomp_set;
+	struct combphy_reg pipe_clk_24m;
 	struct combphy_reg pipe_clk_25m;
 	struct combphy_reg pipe_clk_100m;
 	struct combphy_reg pipe_phymode_sel;
@@ -584,6 +585,203 @@ static const struct rockchip_combphy_cfg rk3568_combphy_cfgs = {
 	.combphy_cfg	= rk3568_combphy_cfg,
 };
 
+static int rk3576_combphy_cfg(struct rockchip_combphy_priv *priv)
+{
+	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
+	unsigned long rate;
+
+	switch (priv->type) {
+	case PHY_TYPE_PCIE:
+		/* Set SSC downward spread spectrum */
+		rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c);
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_pcie, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_pcie, true);
+		break;
+	case PHY_TYPE_USB3:
+		/* Set SSC downward spread spectrum */
+		rockchip_combphy_updatel(priv, GENMASK(5, 4), BIT(4), 0x7c);
+
+		/* Enable adaptive CTLE for USB3.0 Rx */
+		rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38);
+
+		/* Set PLL KVCO fine tuning signals */
+		rockchip_combphy_updatel(priv, GENMASK(4, 2), BIT(3), 0x80);
+
+		/* Set PLL LPF R1 to su_trim[10:7]=1001 */
+		writel(0x4, priv->mmio + (0xb << 2));
+
+		/* Set PLL input clock divider 1/2 */
+		rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0x14);
+
+		/* Set PLL loop divider */
+		writel(0x32, priv->mmio + (0x11 << 2));
+
+		/* Set PLL KVCO to min and set PLL charge pump current to max */
+		writel(0xf0, priv->mmio + (0xa << 2));
+
+		/* Set Rx squelch input filler bandwidth */
+		writel(0x0d, priv->mmio + (0x14 << 2));
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txcomp_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_txelec_sel, false);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->usb_mode_set, true);
+		break;
+	case PHY_TYPE_SATA:
+		/* Enable adaptive CTLE for SATA Rx */
+		rockchip_combphy_updatel(priv, GENMASK(0, 0), BIT(0), 0x38);
+
+		/* Set tx_rterm = 50 ohm and rx_rterm = 43.5 ohm */
+		writel(0x8F, priv->mmio + (0x06 << 2));
+
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con0_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con1_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con2_for_sata, true);
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->con3_for_sata, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con0_for_sata, true);
+		rockchip_combphy_param_write(priv->pipe_grf, &cfg->pipe_con1_for_sata, true);
+		break;
+	default:
+		dev_err(priv->dev, "incompatible PHY type\n");
+		return -EINVAL;
+	}
+
+	rate = clk_get_rate(priv->refclk);
+
+	switch (rate) {
+	case REF_CLOCK_24MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_24m, true);
+		if (priv->type == PHY_TYPE_USB3 || priv->type == PHY_TYPE_SATA) {
+			/* Set ssc_cnt[9:0]=0101111101 & 31.5KHz */
+			rockchip_combphy_updatel(priv, GENMASK(7, 6), BIT(6), 0xe << 2);
+
+			rockchip_combphy_updatel(priv, GENMASK(7, 0), 0x5f, 0xf << 2);
+		} else if (priv->type == PHY_TYPE_PCIE) {
+			/* PLL KVCO tuning fine */
+			rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2);
+
+			/* Set up rx_trim */
+			writel(0x0, priv->mmio + (0x1b << 2));
+
+			/* Set up su_trim: T0_1 */
+			writel(0x90, priv->mmio + (0xa << 2));
+			writel(0x02, priv->mmio + (0xb << 2));
+			writel(0x57, priv->mmio + (0xd << 2));
+
+			writel(0x5f, priv->mmio + (0xf << 2));
+		}
+		break;
+	case REF_CLOCK_25MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_25m, true);
+		break;
+	case REF_CLOCK_100MHz:
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_100m, true);
+		if (priv->type == PHY_TYPE_PCIE) {
+			/* gate_tx_pck_sel length select work for L1SS */
+			writel(0xc0, priv->mmio + 0x74);
+
+			/* PLL KVCO tuning fine */
+			rockchip_combphy_updatel(priv, GENMASK(4, 2), 0x4 << 2, 0x20 << 2);
+
+			/* Set up rx_trim: PLL LPF C1 85pf R1 1.25kohm */
+			writel(0x4c, priv->mmio + (0x1b << 2));
+
+			/* Set up su_trim: T3_P1 650mv */
+			writel(0x90, priv->mmio + (0xa << 2));
+			writel(0x43, priv->mmio + (0xb << 2));
+			writel(0x88, priv->mmio + (0xc << 2));
+			writel(0x56, priv->mmio + (0xd << 2));
+		} else if (priv->type == PHY_TYPE_SATA) {
+			/* downward spread spectrum +500ppm */
+			rockchip_combphy_updatel(priv, GENMASK(7, 4), 0x50, 0x1f << 2);
+
+			/* ssc ppm adjust to 3500ppm */
+			rockchip_combphy_updatel(priv, GENMASK(3, 0), 0x7, 0x9 << 2);
+		}
+		break;
+	default:
+		dev_err(priv->dev, "Unsupported rate: %lu\n", rate);
+		return -EINVAL;
+	}
+
+	if (priv->ext_refclk) {
+		rockchip_combphy_param_write(priv->phy_grf, &cfg->pipe_clk_ext, true);
+		if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_100MHz) {
+			writel(0x10, priv->mmio + (0x20 << 2));
+
+			writel(0x0c, priv->mmio + (0x1b << 2));
+
+			/* Set up su_trim: T3_P1 650mv */
+			writel(0x90, priv->mmio + (0xa << 2));
+			writel(0x43, priv->mmio + (0xb << 2));
+			writel(0x88, priv->mmio + (0xc << 2));
+			writel(0x56, priv->mmio + (0xd << 2));
+		}
+	}
+
+	if (priv->enable_ssc) {
+		rockchip_combphy_updatel(priv, GENMASK(4, 4), BIT(4), 0x7 << 2);
+
+		if (priv->type == PHY_TYPE_PCIE && rate == REF_CLOCK_24MHz) {
+			/* Xin24M T0_1 650mV */
+			writel(0x00, priv->mmio + (0x10 << 2));
+			writel(0x32, priv->mmio + (0x11 << 2));
+			writel(0x00, priv->mmio + (0x1b << 2));
+			writel(0x90, priv->mmio + (0x0a << 2));
+			writel(0x02, priv->mmio + (0x0b << 2));
+			writel(0x08, priv->mmio + (0x0c << 2));
+			writel(0x57, priv->mmio + (0x0d << 2));
+			writel(0x40, priv->mmio + (0x0e << 2));
+			writel(0x5f, priv->mmio + (0x0f << 2));
+			writel(0x10, priv->mmio + (0x20 << 2));
+		}
+	}
+
+	return 0;
+}
+
+static const struct rockchip_combphy_grfcfg rk3576_combphy_grfcfgs = {
+	/* pipe-phy-grf */
+	.pcie_mode_set		= { 0x0000, 5, 0, 0x00, 0x11 },
+	.usb_mode_set		= { 0x0000, 5, 0, 0x00, 0x04 },
+	.pipe_rxterm_set	= { 0x0000, 12, 12, 0x00, 0x01 },
+	.pipe_txelec_set	= { 0x0004, 1, 1, 0x00, 0x01 },
+	.pipe_txcomp_set	= { 0x0004, 4, 4, 0x00, 0x01 },
+	.pipe_clk_24m		= { 0x0004, 14, 13, 0x00, 0x00 },
+	.pipe_clk_25m		= { 0x0004, 14, 13, 0x00, 0x01 },
+	.pipe_clk_100m		= { 0x0004, 14, 13, 0x00, 0x02 },
+	.pipe_phymode_sel	= { 0x0008, 1, 1, 0x00, 0x01 },
+	.pipe_rate_sel		= { 0x0008, 2, 2, 0x00, 0x01 },
+	.pipe_rxterm_sel	= { 0x0008, 8, 8, 0x00, 0x01 },
+	.pipe_txelec_sel	= { 0x0008, 12, 12, 0x00, 0x01 },
+	.pipe_txcomp_sel	= { 0x0008, 15, 15, 0x00, 0x01 },
+	.pipe_clk_ext		= { 0x000c, 9, 8, 0x02, 0x01 },
+	.pipe_phy_status	= { 0x0034, 6, 6, 0x01, 0x00 },
+	.con0_for_pcie		= { 0x0000, 15, 0, 0x00, 0x1000 },
+	.con1_for_pcie		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_pcie		= { 0x0008, 15, 0, 0x00, 0x0101 },
+	.con3_for_pcie		= { 0x000c, 15, 0, 0x00, 0x0200 },
+	.con0_for_sata		= { 0x0000, 15, 0, 0x00, 0x0129 },
+	.con1_for_sata		= { 0x0004, 15, 0, 0x00, 0x0000 },
+	.con2_for_sata		= { 0x0008, 15, 0, 0x00, 0x80c1 },
+	.con3_for_sata		= { 0x000c, 15, 0, 0x00, 0x0407 },
+	/* php-grf */
+	.pipe_con0_for_sata	= { 0x001C, 2, 0, 0x00, 0x2 },
+	.pipe_con1_for_sata	= { 0x0020, 2, 0, 0x00, 0x2 },
+};
+
+static const struct rockchip_combphy_cfg rk3576_combphy_cfgs = {
+	.num_phys = 2,
+	.phy_ids = {
+		0x2b050000,
+		0x2b060000
+	},
+	.grfcfg		= &rk3576_combphy_grfcfgs,
+	.combphy_cfg	= rk3576_combphy_cfg,
+};
+
 static int rk3588_combphy_cfg(struct rockchip_combphy_priv *priv)
 {
 	const struct rockchip_combphy_grfcfg *cfg = priv->cfg->grfcfg;
@@ -775,6 +973,10 @@ static const struct of_device_id rockchip_combphy_of_match[] = {
 		.compatible = "rockchip,rk3568-naneng-combphy",
 		.data = &rk3568_combphy_cfgs,
 	},
+	{
+		.compatible = "rockchip,rk3576-naneng-combphy",
+		.data = &rk3576_combphy_cfgs,
+	},
 	{
 		.compatible = "rockchip,rk3588-naneng-combphy",
 		.data = &rk3588_combphy_cfgs,
-- 
2.34.1





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux