On Mon, 07 Oct 2024 15:14:39 +0200 Neil Armstrong <neil.armstrong@xxxxxxxxxx> wrote: > Document the bindings for the Allegro MicroSystems ALS31300 3-D Linear Hall > Effect Sensor controller by an I2C interface, mainly used in 3D head-on > motion sensing applications. > > The device can be configured with different sensitivities in factory, > but the sensitivity value used to calculate value into the Gauss > unit is not available from registers, thus the sensitivity is > provided by the compatible/device-id string which is based > on the part number as described in the datasheet page 2. > > The datasheet is available on the product website at [1]. > > [1] https://www.allegromicro.com/en/products/sense/linear-and-angular-position/linear-position-sensor-ics/als31300 Use Datasheet tag. It's not that common but it makes it clear what this is and some scripting can pick it up. > Datasheet: https://www.allegromicro.com/en/products/sense/linear-and-angular-position/linear-position-sensor-ics/als31300 > Signed-off-by: Neil Armstrong <neil.armstrong@xxxxxxxxxx> Hi Neil, > --- > .../iio/magnetometer/allegro,als31300.yaml | 43 ++++++++++++++++++++++ > 1 file changed, 43 insertions(+) > > diff --git a/Documentation/devicetree/bindings/iio/magnetometer/allegro,als31300.yaml b/Documentation/devicetree/bindings/iio/magnetometer/allegro,als31300.yaml > new file mode 100644 > index 000000000000..0a08e769f3aa > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/magnetometer/allegro,als31300.yaml Rob's bot has better eyes than me. Filename needs to be allegromicro,als31300.yaml > @@ -0,0 +1,43 @@ > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/iio/magnetometer/allegromicro,als31300.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Allegro MicroSystems ALS31300 3-D Linear Hall Effect sensor > + > +maintainers: > + - Neil Armstrong <neil.armstrong@xxxxxxxxxx> > + > +properties: > + $nodename: > + pattern: '^magnetometer@[0-9a-f]+$' > + > + compatible: > + enum: > + - allegromicro,als31300-500 # Factory configured at 500 Gauss input range > + - allegromicro,als31300-1000 # Factory configured at 1000 Gauss input range > + - allegromicro,als31300-2000 # Factory configured at 2000 Gauss input range I was wondering if the range should be a separate property, but given these are the part numbers the parts are sold under, I think compatibles are fine. > + > + reg: > + maxItems: 1 > + > + vcc-supply: > + description: 5.5V supply A quick glance at the pinout google fed me suggests an interrupt pin. Even though the driver doesn't yet support it (I assume as I've not looked at that yet) the binding should include it. > + > +required: > + - compatible > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + sensor@61 { magnetometer@61 { > + compatible = "allegromicro,als31300"; > + reg = <0x61>; > + vcc-supply = <&hall_vcc>; > + }; > + }; >
