From: Laurentiu Mihalcea <laurentiu.mihalcea@xxxxxxx>
The 'dsp' node is currently configured for running an
audio firmware. Since the firmware requires that some
audio-related IPs be disabled in Linux, this will clash
with the configurations from the imx8 board DTs
(i.e: imx8qm-mek, imx8qxp-mek, etc...), thus making the
dsp unusable (since the firmware won't function properly).
To avoid this issue, configure the 'dsp' node for rproc.
This way, users will be able to use the dsp alongside the
board-level audio configuration as long as the firmware
doesn't need the audio IPs.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@xxxxxxx>
---
.../boot/dts/freescale/imx8-ss-audio.dtsi | 19 ++++++++-----------
1 file changed, 8 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
index ff5df0fed9e9..a60ebb718789 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-audio.dtsi
@@ -431,22 +431,19 @@ dsp_ram_lpcg: clock-controller@59590000 {
};
dsp: dsp@596e8000 {
- compatible = "fsl,imx8qxp-dsp";
+ compatible = "fsl,imx8qxp-hifi4";
reg = <0x596e8000 0x88000>;
clocks = <&dsp_lpcg IMX_LPCG_CLK_5>,
<&dsp_ram_lpcg IMX_LPCG_CLK_4>,
<&dsp_lpcg IMX_LPCG_CLK_7>;
clock-names = "ipg", "ocram", "core";
- power-domains = <&pd IMX_SC_R_MU_13A>,
- <&pd IMX_SC_R_MU_13B>,
- <&pd IMX_SC_R_DSP>,
- <&pd IMX_SC_R_DSP_RAM>;
- mbox-names = "txdb0", "txdb1",
- "rxdb0", "rxdb1";
- mboxes = <&lsio_mu13 2 0>,
- <&lsio_mu13 2 1>,
- <&lsio_mu13 3 0>,
- <&lsio_mu13 3 1>;
+ power-domains = <&pd IMX_SC_R_MU_13B>,
+ <&pd IMX_SC_R_MU_2A>;
+ mbox-names = "tx", "rx", "rxdb";
+ mboxes = <&lsio_mu13 0 0>,
+ <&lsio_mu13 1 0>,
+ <&lsio_mu13 3 0>;
+ firmware-name = "imx/dsp/hifi4.bin";
status = "disabled";
};
--
2.34.1
