On Fri, Oct 11, 2024 at 07:39:32PM +0530, Vikram Sharma wrote: > The Vision Mezzanine for the RB3 ships with an imx577 camera sensor. > Enable the IMX577 on the vision mezzanine. > > An example media-ctl pipeline for the imx577 is: > > media-ctl --reset > media-ctl -v -V '"imx577 '19-001a'":0[fmt:SRGGB10/4056x3040 field:none]' > media-ctl -V '"msm_csiphy3":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4056x3040]' > media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4056x3040]' > media-ctl -l '"msm_csiphy3":1->"msm_csid0":0[1]' > media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' > > yavta -B capture-mplane -c -I -n 5 -f SRGGB10P -s 4056x3040 -F /dev/video0 > > Signed-off-by: Hariram Purushothaman <quic_hariramp@xxxxxxxxxxx> > Signed-off-by: Vikram Sharma <quic_vikramsa@xxxxxxxxxxx> > Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@xxxxxxxxxxx> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../qcom/qcs6490-rb3gen2-vision-mezzanine.dts | 61 +++++++++++++++++++ > arch/arm64/boot/dts/qcom/sc7280.dtsi | 33 ++++++++++ > 3 files changed, 95 insertions(+) > create mode 100644 arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile > index aea1d69db541..7208da1d3697 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -111,6 +111,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcm6490-shift-otter.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2.dtb > +dtb-$(CONFIG_ARCH_QCOM) += qcs6490-rb3gen2-vision-mezzanine.dtb > dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb > dtb-$(CONFIG_ARCH_QCOM) += qdu1000-idp.dtb > dtb-$(CONFIG_ARCH_QCOM) += qrb2210-rb1.dtb > diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts > new file mode 100644 > index 000000000000..04b5fe80d38d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-vision-mezzanine.dts > @@ -0,0 +1,61 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved. > + */ > + > +/dts-v1/; > + > +#include "qcs6490-rb3gen2.dts" DTS does not include DTS, but DTSI. And where is the compatible you wanted to use? This looks sketchy... mezzanines are supposed to be overlays, I think. Best regards, Krzysztof
