From: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> Change "subnodes" to "subnode" in subnode description for better grammatical accuracy, capitalize pinmux description, wrap all descriptions at 80 characters, and remove literal style indicators from descriptions that don't need their new lines preserved. Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- .../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-) diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml index 352a88d7b135e..bf8dc176553c1 100644 --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml @@ -119,11 +119,11 @@ patternProperties: '^pins': type: object description: - A pinctrl node should contain at least one subnodes representing the + A pinctrl node should contain at least one subnode representing the pinctrl groups available on the machine. Each subnode will list the - pins it needs, and how they should be configured, with regard to muxer - configuration, pullups, drive strength, input enable/disable and input - schmitt. + pins it needs, and how they should be configured, with regard to + muxer configuration, pullups, drive strength, input enable/disable + and input schmitt. allOf: - $ref: pinmux-node.yaml - $ref: pincfg-node.yaml @@ -133,7 +133,8 @@ patternProperties: description: Integer array, represents gpio pin number and mux setting. Supported pin number and mux varies for different SoCs, and are - defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h + directly. bias-disable: true @@ -142,7 +143,7 @@ patternProperties: - type: boolean - enum: [100, 101, 102, 103] description: Pull up PUPD/R0/R1 type define value. - description: | + description: For normal pull up type, it is not necessary to specify R1R0 values; When pull up type is PUPD/R0/R1, adding R1R0 defines will set different resistance values. @@ -152,7 +153,7 @@ patternProperties: - type: boolean - enum: [100, 101, 102, 103] description: Pull down PUPD/R0/R1 type define value. - description: | + description: For normal pull down type, it is not necessary to specify R1R0 values; When pull down type is PUPD/R0/R1, adding R1R0 defines will set different resistance values. -- 2.46.2