On Thu, 10 Oct 2024 16:10:49 +0200, Linus Walleij wrote:
> This brings over the few know-how items and little things
> I found about the BCMBCA LEDs in my previous duplicate driver.
>
> This was tested on the BCM6846-based Genexis XG6846B.
>
> The main addition is the ability to define the number shifting
> bits in the serial shift register which is necessary if the
> previous boot stages have not set up the hardware properly
> before.
>
> [...]
Applied, thanks!
[1/4] dt-bindings: leds: bcm63138: Add shift register bits
commit: d19261ffd077609e5d348f1c12894997807a64a8
[2/4] leds: bcm63138: Use scopes and guards
commit: 61574073e15cbaaab3fa1b2ad7df3ffe21e48509
[3/4] leds: bcm63138: Handle shift register config
commit: 5f312fdace9cee3fb8a7964469546fb4d8624ff7
[4/4] leds: bcm63138: Add some register defines
commit: def9c8b7bc0d9d7436cf29eb0106698e356f006d
--
Lee Jones [李琼斯]
