Hi Lee,
On Mon, Mar 9, 2015 at 10:28 AM, Lee Jones <lee.jones@xxxxxxxxxx> wrote:
> On Fri, 06 Mar 2015, Mike Turquette wrote:
>> Quoting Lee Jones (2015-03-04 04:00:03)
>> > Mike,
>> >
>> > Do you want me to resend this set with Robert's Reviewed-by applied,
>> > or are you happy to apply it yourself?
>>
>> No need for the resend. I am hoping for a final review from a DT human.
>>
>> This approach looks fine to me. In practice I think it is restricted to
>> hardware blocks that don't exist in DT yet (e.g. no driver, in the case
>> of your interconnect) and that restriction is probably for the best.
>
> Agreed.
I think this restriction should be documented in the DT binding more clearly,
as adding a "clk-always-on" node prohibits you from handling the clock
correctly in
the future.
Still, for simple devices where you don't have a driver, but have "predictable"
bindings (e.g. a bus like "simple-pm-bus"), I think it's better to add
a device node
for that simple device now, incl. a reference to the clock, and have a simple
driver that binds to the device, or platform code that looks for a
compatible node,
and enables the clock. That way you don't have to make any chances to the DTS
later, when you'll have a real driver.
>> > > v2 => v3:
>> > > - Ensure DT actually reflects h/w
>> > > - i.e. Nodes should not contain a mishmash of different IP
>> > > blocks, but should identify related h/w. In the current
>> > > example we use interconnects
>> > > - Change naming from clkdomain to clk-always-on
>> > > - Place "do not abuse" warning in documentation
>> > >
>> > > v1 => v2:
>> > > - Turned the ST specific driver into a generic one
>> > >
>> > > Hardware can have a bunch of clocks which must not be turned off.
>> > > If drivers a) fail to obtain a reference to any of these or b) give
>> > > up a previously obtained reference during suspend, the common clk
>> > > framework will attempt to turn them off and the hardware will
>> > > subsequently die. The only way to recover from this failure is to
>> > > restart.
>> > >
>> > > To avoid either of these two scenarios from catastrophically
>> > > disabling the running system we have implemented a clock domain
>> > > where clocks are consumed and references are taken, thus preventing
>> > > them from being shut down by the framework.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
