The BCM6846 has the same simplistic GPIOs as some other Broadcom SoCs: plain memory-mapped registers with up to 8 blocks of 32 GPIOs each totalling 256 GPIOs. Users of the SoC can selectively enable the GPIO blocks actually used with a certain design. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- arch/arm/boot/dts/broadcom/bcm6846.dtsi | 80 +++++++++++++++++++++++++++++++++ 1 file changed, 80 insertions(+) diff --git a/arch/arm/boot/dts/broadcom/bcm6846.dtsi b/arch/arm/boot/dts/broadcom/bcm6846.dtsi index f4f1f3a06eac..dc0c87c79569 100644 --- a/arch/arm/boot/dts/broadcom/bcm6846.dtsi +++ b/arch/arm/boot/dts/broadcom/bcm6846.dtsi @@ -104,6 +104,86 @@ watchdog@480 { reg = <0x480 0x10>; }; + /* GPIOs 0 .. 31 */ + gpio0: gpio@500 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x500 0x04>, <0x520 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 32 .. 63 */ + gpio1: gpio@504 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x504 0x04>, <0x524 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 64 .. 95 */ + gpio2: gpio@508 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x508 0x04>, <0x528 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 96 .. 127 */ + gpio3: gpio@50c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x50c 0x04>, <0x52c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 128 .. 159 */ + gpio4: gpio@510 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x510 0x04>, <0x530 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 160 .. 191 */ + gpio5: gpio@514 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x514 0x04>, <0x534 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 192 .. 223 */ + gpio6: gpio@518 { + compatible = "brcm,bcm6345-gpio"; + reg = <0x518 0x04>, <0x538 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + + /* GPIOs 224 .. 255 */ + gpio7: gpio@51c { + compatible = "brcm,bcm6345-gpio"; + reg = <0x51c 0x04>, <0x53c 0x04>; + reg-names = "dirout", "dat"; + gpio-controller; + #gpio-cells = <2>; + status = "disabled"; + }; + uart0: serial@640 { compatible = "brcm,bcm6345-uart"; reg = <0x640 0x1b>; -- 2.46.2