On Tue, Mar 24, 2015 at 11:31 PM, Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> wrote: > This patch adds bindings for qfprom found in QCOM SOCs. QFPROM driver > is based on simple eeprom framework. > > Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxx> > --- > .../devicetree/bindings/eeprom/qfprom.txt | 23 ++++++++++++++++++++++ > 1 file changed, 23 insertions(+) > create mode 100644 Documentation/devicetree/bindings/eeprom/qfprom.txt > > diff --git a/Documentation/devicetree/bindings/eeprom/qfprom.txt b/Documentation/devicetree/bindings/eeprom/qfprom.txt > new file mode 100644 > index 0000000..d5baed6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/eeprom/qfprom.txt > @@ -0,0 +1,23 @@ > += Qualcomm QFPROM device tree bindings = > + > +This binding is intended to represent QFPROM which is found in most QCOM SOCs. > + > +Required properties: > +- compatible: should be "qcom,qfprom" > +- reg: Should contain registers location and length > + > += Data cells = > +Are child nodes of qfprom, bindings of which as described in > +bindings/eeprom/eeprom.txt > + > +Example: > + > + qfprom: qfprom@00700000 { > + compatible = "qcom,qfprom"; > + reg = <0x00700000 0x1000>; The qfprom block starts at 0x700000 and is 0x8000 long. The registers at the beginning of this block are raw R/W fuse bits and should not be read directly. Instead there is an ecc corrected shadow copy of these registers at 0x4000. > + ... > + /* Data cells */ > + tsens_calibration: calib@404 { > + reg = <0x404 0x10>; > + }; > + }; Regards, Bjorn -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html