[PATCH v5 2/2] riscv: dts: sophgo: Add LicheeRV Nano board device tree

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



LicheeRV Nano B [1] is an embedded development platform based on the SOPHGO
SG2002 chip, the B(ase) version is deprived of Wifi/Bluetooth and Ethernet.

Add only support for UART and SDHCI.

Link: https://wiki.sipeed.com/hardware/en/lichee/RV_Nano/1_intro.html [1]

Signed-off-by: Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
---
 arch/riscv/boot/dts/sophgo/Makefile                |  1 +
 .../boot/dts/sophgo/sg2002-licheerv-nano-b.dts     | 95 ++++++++++++++++++++++
 2 files changed, 96 insertions(+)

diff --git a/arch/riscv/boot/dts/sophgo/Makefile b/arch/riscv/boot/dts/sophgo/Makefile
index 57ad82a61ea6fc25f72d0ade991e33feaa53266e..47d4243a8f35a7d5572dbf5ef9899297b908afde 100644
--- a/arch/riscv/boot/dts/sophgo/Makefile
+++ b/arch/riscv/boot/dts/sophgo/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SOPHGO) += cv1800b-milkv-duo.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += cv1812h-huashan-pi.dtb
+dtb-$(CONFIG_ARCH_SOPHGO) += sg2002-licheerv-nano-b.dtb
 dtb-$(CONFIG_ARCH_SOPHGO) += sg2042-milkv-pioneer.dtb
diff --git a/arch/riscv/boot/dts/sophgo/sg2002-licheerv-nano-b.dts b/arch/riscv/boot/dts/sophgo/sg2002-licheerv-nano-b.dts
new file mode 100644
index 0000000000000000000000000000000000000000..86a712b953a5acd5926120db61354243f5580a05
--- /dev/null
+++ b/arch/riscv/boot/dts/sophgo/sg2002-licheerv-nano-b.dts
@@ -0,0 +1,95 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Thomas Bonnefille <thomas.bonnefille@xxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include "sg2002.dtsi"
+
+/ {
+	model = "LicheeRV Nano B";
+	compatible = "sipeed,licheerv-nano-b", "sipeed,licheerv-nano", "sophgo,sg2002";
+
+	aliases {
+		gpio0 = &gpio0;
+		gpio1 = &gpio1;
+		gpio2 = &gpio2;
+		gpio3 = &gpio3;
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+		serial4 = &uart4;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&osc {
+	clock-frequency = <25000000>;
+};
+
+&pinctrl {
+	uart0_cfg: uart0-cfg {
+		uart0-pins {
+			pinmux = <PINMUX(PIN_UART0_TX, 0)>,
+				 <PINMUX(PIN_UART0_RX, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+	};
+
+	sdhci0_cfg: sdhci0-cfg {
+		sdhci0-clk-pins {
+			pinmux = <PINMUX(PIN_SD0_CLK, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <16100>;
+			power-source = <3300>;
+		};
+
+		sdhci0-cmd-pins {
+			pinmux = <PINMUX(PIN_SD0_CMD, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+
+		sdhci0-data-pins {
+			pinmux = <PINMUX(PIN_SD0_D0, 0)>,
+				 <PINMUX(PIN_SD0_D1, 0)>,
+				 <PINMUX(PIN_SD0_D2, 0)>,
+				 <PINMUX(PIN_SD0_D3, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+
+		sdhci0-cd-pins {
+			pinmux = <PINMUX(PIN_SD0_CD, 0)>;
+			bias-pull-up;
+			drive-strength-microamp = <10800>;
+			power-source = <3300>;
+		};
+	};
+};
+
+&sdhci0 {
+	pinctrl-0 = <&sdhci0_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+};
+
+&uart0 {
+	pinctrl-0 = <&uart0_cfg>;
+	pinctrl-names = "default";
+	status = "okay";
+};

-- 
2.47.0





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux