> Subject: Re: [PATCH v2 6/7] arm64: dts: freescale: imx95-19x19-evk:
> add nxp,ctrl-ids property
>
> On Tue, Sep 03, 2024 at 03:17:51PM +0800, Peng Fan (OSS) wrote:
> > From: Peng Fan <peng.fan@xxxxxxx>
> >
> > Add 'nxp,ctrl-ids' for SCMI firmware to confirm the board ctrls as
>
> s/confirm/configure?
Fix in v3.
>
> > wakeup sources.
> >
> > Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
> > ---
> > arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts | 17
> > +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > index 37a1d4ca1b20..5101cd171e09 100644
> > --- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > +++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
> > @@ -8,6 +8,15 @@
> > #include <dt-bindings/pwm/pwm.h>
> > #include "imx95.dtsi"
> >
> > +#define FALLING_EDGE 1
> > +#define RISING_EDGE 2
> > +
> > +#define BRD_SM_CTRL_SD3_WAKE 0x8000 /*
> PCAL6408A-0 */
> > +#define BRD_SM_CTRL_PCIE1_WAKE 0x8001 /*
> PCAL6408A-4 */
> > +#define BRD_SM_CTRL_BT_WAKE 0x8002 /*
> PCAL6408A-5 */
> > +#define BRD_SM_CTRL_PCIE2_WAKE 0x8003 /*
> PCAL6408A-6 */
> > +#define BRD_SM_CTRL_BUTTON 0x8004 /*
> PCAL6408A-7 */
>
> Are these defines board specific?
Yes, board specific.
Thanks,
Peng.
>
> Shawn
>
> > +
> > / {
> > model = "NXP i.MX95 19X19 board";
> > compatible = "fsl,imx95-19x19-evk", "fsl,imx95"; @@ -357,6
> +366,14
> > @@ &usdhc2 {
> > status = "okay";
> > };
> >
> > +&scmi_misc {
> > + nxp,ctrl-ids = <BRD_SM_CTRL_SD3_WAKE FALLING_EDGE
> > + BRD_SM_CTRL_PCIE1_WAKE
> FALLING_EDGE
> > + BRD_SM_CTRL_BT_WAKE
> FALLING_EDGE
> > + BRD_SM_CTRL_PCIE2_WAKE
> FALLING_EDGE
> > + BRD_SM_CTRL_BUTTON FALLING_EDGE>;
> > +};
> > +
> > &wdog3 {
> > fsl,ext-reset-output;
> > status = "okay";
> >
> > --
> > 2.37.1
> >
