This series introduces support to enable the Mobile Display Subsystem (MDSS) and Display Processing Unit (DPU) for the Qualcomm SA8775P target. It includes the addition of the hardware catalog, compatible string, relevant device tree changes, and their YAML bindings. --- In this series - PATCH 1: "dt-bindings: display/msm: Document MDSS on SA8775P" depends on dp binding documetion in this change: https://lore.kernel.org/all/20240923113150.24711-5-quic_mukhopad@xxxxxxxxxxx/ - PATCH 5: "arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU" depends on the clock enablement change: https://lore.kernel.org/all/20240816-sa8775p-mm-v3-v1-0-77d53c3c0cef@xxxxxxxxxxx/ --- [v4] - Removed new YAML added for sa8775p dpu dt-binding documention as it is similar to qcom,sm8650-dpu.yaml and added the compatible in same. [Krzysztof] [v3] -Edited copyright for catalog changes. [Dmitry] -Fix dt_binding_check tool errors(update reg address as address-cells and size-cells of root node one and maintain the same for child nodes of mdss, added additionalProperties in schema). [Rob, Bjorn, Krzysztof] -Add QCOM_ICC_TAG_ACTIVE_ONLY interconnect path tag to mdp0-mem and mdp1-mem path in devicetree. [Dmitry] -Update commit subject and message for DT change. [Dmitry] -Remove interconnect path tags from dt bindings. (ref sm8450-mdss yaml) [v2] - Updated cover letter subject and message. [Dmitry] - Use fake DISPCC nodes to avoid clock dependencies in dt-bindings. [Dmitry] - Update bindings by fixing dt_binding_check tool errors (update includes in example), adding proper spacing and indentation in the binding example, droping unused labels, droping status disable, adding reset node. [Dmitry, Rob, Krzysztof] - Reorder compatible string of MDSS and DPU based on alphabetical order.[Dmitry] - add reg_bus_bw in msm_mdss_data. [Dmitry] - Fix indentation in the devicetree. [Dmitry] -- 2.34.1 --- Mahadevan (5): dt-bindings: display/msm: Document MDSS on SA8775P dt-bindings: display/msm: Document the DPU for SA8775P drm/msm: mdss: Add SA8775P support drm/msm/dpu: Add SA8775P support arm64: dts: qcom: sa8775p: add display dt nodes for MDSS0 and DPU .../bindings/display/msm/qcom,sa8775p-mdss.yaml | 241 ++++++++++ .../bindings/display/msm/qcom,sm8650-dpu.yaml | 1 + arch/arm64/boot/dts/qcom/sa8775p.dtsi | 89 ++++ .../drm/msm/disp/dpu1/catalog/dpu_8_4_sa8775p.h | 485 +++++++++++++++++++++ drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.c | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_hw_catalog.h | 1 + drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c | 1 + drivers/gpu/drm/msm/msm_mdss.c | 11 + 8 files changed, 830 insertions(+) --- base-commit: e390603cfa79c860ed35e073f5fe77805b067a8e change-id: 20240930-patchv3_1-600cbc1549e8 Best regards, -- Mahadevan <quic_mahap@xxxxxxxxxxx>
