The ASPEED AST27XX interrupt controller(INTC) contain second level and third level interrupt controller. INTC0: The second level INTC, which used to assert GIC(#192~#197) if interrupt in INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in one INTC0. INTC1_x: The third level INTC, which used to assert GIC(#192~#197) if interrupt in INTC1 asserted. There are 6 GIC interrupt number(#192~#197) used in one INTC0. Signed-off-by: Kevin Chen <kevin_chen@xxxxxxxxxxxxxx> --- .../aspeed,ast2700-intc.yaml | 87 +++++++++++++++++++ 1 file changed, 87 insertions(+) create mode 100644 Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml diff --git a/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml new file mode 100644 index 000000000000..650a1f6e1177 --- /dev/null +++ b/Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2700-intc.yaml @@ -0,0 +1,87 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/interrupt-controller/aspeed,ast2700-intc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed AST2700 Interrupt Controller + +description: + This interrupt controller hardware is second level interrupt controller that + is hooked to a parent interrupt controller. It's useful to combine multiple + interrupt sources into 1 interrupt to parent interrupt controller. + +maintainers: + - Kevin Chen <kevin_chen@xxxxxxxxxxxxxx> + +properties: + compatible: + enum: + - aspeed,ast2700-intc-ic + + reg: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + interrupts: + maxItems: 10 + description: + Depend to which INTC0 or INTC1 used. + INTC0 and INTC1 are two kinds of interrupt controller with enable and raw + status registers for use. + INTC0 is used to assert GIC if interrupt in INTC1 asserted. + INTC1 is used to assert INTC0 if interrupt of modules asserted. + +-----+ +-------+ +---------+---module0 + | GIC |---| INTC0 |--+--| INTC1_0 |---module2 + | | | | | | |---... + +-----+ +-------+ | +---------+---module31 + | + | +---------+---module0 + +---| INTC1_1 |---module2 + | | |---... + | +---------+---module31 + ... + | +---------+---module0 + +---| INTC1_5 |---module2 + | |---... + +---------+---module31 + + +required: + - compatible + - reg + - interrupt-controller + - '#interrupt-cells' + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bus { + #address-cells = <2>; + #size-cells = <2>; + + interrupt-controller@12101b00 { + compatible = "aspeed,ast2700-intc-ic"; + reg = <0 0x12101b00 0 0x10>; + #interrupt-cells = <2>; + interrupt-controller; + interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>; + }; + }; -- 2.34.1
