Document 'global' SPI interrupt along with the existing MSI interrupts so
that QCOM PCIe RC driver can make use of it to get events such as PCIe
link specific events, safety events, etc.
Signed-off-by: Qiang Yu <quic_qianyu@xxxxxxxxxxx>
---
.../devicetree/bindings/pci/qcom,pcie-x1e80100.yaml | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
index a9db0a231563..2c0e01fc0ab8 100644
--- a/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie-x1e80100.yaml
@@ -46,8 +46,8 @@ properties:
- const: cnoc_sf_axi # Config NoC PCIe1 AXI clock
interrupts:
- minItems: 8
- maxItems: 8
+ minItems: 9
+ maxItems: 9
interrupt-names:
items:
@@ -59,6 +59,7 @@ properties:
- const: msi5
- const: msi6
- const: msi7
+ - const: global
resets:
minItems: 1
@@ -130,9 +131,10 @@ examples:
<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
- <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+ <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "msi0", "msi1", "msi2", "msi3",
- "msi4", "msi5", "msi6", "msi7";
+ "msi4", "msi5", "msi6", "msi7", "global";
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
--
2.34.1
