The ADC clock frequency is limited depending on modes used. Add device tree property which allow to set the mode used and the maximum frequency ratings for the instance. These allows to set the ADC clock to a frequency which is within specification according to the actual mode used. Acked-by: Fugang Duan <B38611@xxxxxxxxxxxxx> Signed-off-by: Stefan Agner <stefan@xxxxxxxx> --- arch/arm/boot/dts/vfxxx.dtsi | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi index a29c7ce..c6609bd 100644 --- a/arch/arm/boot/dts/vfxxx.dtsi +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -189,6 +189,8 @@ clocks = <&clks VF610_CLK_ADC0>; clock-names = "adc"; status = "disabled"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; }; wdoga5: wdog@4003e000 { @@ -387,6 +389,8 @@ clocks = <&clks VF610_CLK_ADC1>; clock-names = "adc"; status = "disabled"; + fsl,adck-max-frequency = <30000000>, <40000000>, + <20000000>; }; esdhc1: esdhc@400b2000 { -- 2.3.3 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html