The 'enable-active-low' property is not a valid, because it is the
default behaviour of the fixed regulator.
Only 'enable-active-high' is valid, and when this property is absent
the fixed regulator will act as active low by default.
Both the rk3588-orange-pi-5 and the Wolfvision pf5 io expander overlay
smuggled those enable-active-low properties in, so remove them to
make dtbscheck happier.
Fixes: 28799a7734a0 ("arm64: dts: rockchip: add wolfvision pf5 io expander board")
Cc: Michael Riesch <michael.riesch@xxxxxxxxxxxxxx>
Fixes: b6bc755d806e ("arm64: dts: rockchip: Add Orange Pi 5")
Cc: Muhammed Efe Cetin <efectn@xxxxxxxx>
Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
---
.../boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso | 1 -
arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
index ebcaeafc3800..fa61633aea15 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
+++ b/arch/arm64/boot/dts/rockchip/rk3568-wolfvision-pf5-io-expander.dtso
@@ -49,7 +49,6 @@ vcc1v8_eth: vcc1v8-eth-regulator {
vcc3v3_eth: vcc3v3-eth-regulator {
compatible = "regulator-fixed";
- enable-active-low;
gpio = <&gpio0 RK_PC0 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&vcc3v3_eth_enn>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
index feea6b20a6bf..6b77be643249 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dts
@@ -71,7 +71,6 @@ vcc5v0_sys: vcc5v0-sys-regulator {
vcc_3v3_sd_s0: vcc-3v3-sd-s0-regulator {
compatible = "regulator-fixed";
- enable-active-low;
gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
regulator-name = "vcc_3v3_sd_s0";
regulator-boot-on;
--
2.43.0
