This add support for the display bridges (DSI->LVDS and DSI->HDMI)
on the BL i.MX8MM and the 7" LVDS panel in a separate overlay.
Only one of the interfaces (HDMI or LVDS) is supported at the same
time. Enabling the LVDS overlay will disable the HDMI interface.
* Patch 1 and 2: Add the necessary binding changes
* Patch 3: Extend the BL devicetree
* Patch 4: Add the LVDS panel overlay
Changes for v3:
* Add A-b tag from Krzysztof
* Fix LVDS bridge input port reference
Changes for v2:
* Patch 1: Add link to commit message
* Patch 2: Add Conors A-b tag
* Patch 3: Remove blank lines from hdmi node
* Patch 3: Fix order of lvds and hdmi nodes within i2c
* Patch 3: Remove the unneeded deletion of samsung,pll-clock-frequency
* Patch 3: Use the existing MIPI DSI output port from imx8mm.dtsi
* Patch 4: Update copyright year
* Patch 4: Use exisitng MIPI DSI output port from imx8mm.dtsi
* Patch 4: Fix pinctrl for GPIO hogs
* Patch 4: Fix property order in i2c2 node
* Patch 4: Use generic node name for touchscreen
Frieder Schrempf (4):
dt-bindings: vendor-prefixes: Add Jenson Display
dt-bindings: display: panel-lvds: Add compatible for Jenson
BL-JT60050-01A
arm64: dts: imx8mm-kontron: Add support for display bridges on BL
i.MX8MM
arm64: dts: imx8mm-kontron: Add DL (Display-Line) overlay with LVDS
support
.../bindings/display/panel/panel-lvds.yaml | 2 +
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
arch/arm64/boot/dts/freescale/Makefile | 4 +
.../boot/dts/freescale/imx8mm-kontron-bl.dts | 131 ++++++++++++
.../boot/dts/freescale/imx8mm-kontron-dl.dtso | 189 ++++++++++++++++++
5 files changed, 328 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
--
2.46.0
