On Tue, 08 Oct 2024 13:18:04 +0200, Alain Volmat wrote: > Addition of the stm32 csi controller driver > > Signed-off-by: Alain Volmat <alain.volmat@xxxxxxxxxxx> > --- > .../devicetree/bindings/media/st,stm32-csi.yaml | 129 +++++++++++++++++++++ > 1 file changed, 129 insertions(+) > My bot found errors running 'make dt_binding_check' on your patch: yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/st,stm32-csi.example.dtb: csi@48020000: ports:port@0:endpoint:data-lanes:0: 0 is not of type 'array' from schema $id: http://devicetree.org/schemas/media/st,stm32-csi.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/media/st,stm32-csi.example.dtb: csi@48020000: ports:port@0:endpoint:data-lanes:1: 1 is not of type 'array' from schema $id: http://devicetree.org/schemas/media/st,stm32-csi.yaml# doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20241008-csi_dcmipp_mp25-v1-2-e3fd0ed54b31@xxxxxxxxxxx The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
