[PATCH v2 3/4] arm64: dts: rockchip: Fix wakeup prop names on PineNote BT node

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The "brcm,bluetooth.yaml" binding has 'device-wakeup-gpios' and
'host-wakeup-gpios' property names, not '*-wake-gpios'.
Fix the incorrect property names.

Note that the "realtek,bluetooth.yaml" binding does use the
'*-wake-gpios' property names.

Fixes: d449121e5e8a ("arm64: dts: rockchip: Add Pine64 PineNote board")
Signed-off-by: Diederik de Haas <didi.debian@xxxxxxxxx>
---
changes in v2:
- Dropped change already covered by Heiko's patch; updated commit
  message accordingly
- Added Fixes tag

 arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
index de4c082dce07..7381bb751852 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi
@@ -684,8 +684,8 @@ bluetooth {
 		compatible = "brcm,bcm43438-bt";
 		clocks = <&rk817 1>;
 		clock-names = "lpo";
-		device-wake-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
-		host-wake-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
+		device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>;
 		pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>;
 		pinctrl-names = "default";
-- 
2.45.2





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux