+#define has_flash_op(v4l2_flash, op) \
+ (v4l2_flash && v4l2_flash->ops->op)
+
+#define call_flash_op(v4l2_flash, op, arg) \
+ (has_flash_op(v4l2_flash, op) ? \
+ v4l2_flash->ops->op(v4l2_flash, arg) : \
+ -EINVAL)
+
+static enum led_brightness __intensity_to_led_brightness(
+ struct v4l2_ctrl *ctrl,
+ s32 intensity)
+{
+ s64 intensity64 = intensity - ctrl->minimum;
+
+ do_div(intensity64, ctrl->step);
+
+ /*
+ * Indicator LEDs, unlike torch LEDs, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Therefore it must be possible to set it to 0 level which in
+ * the LED subsystem reflects LED_OFF state.
+ */
+ if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY)
+ ++intensity64;
+
+ return intensity64;
+}
+
+static s32 __led_brightness_to_intensity(struct v4l2_ctrl *ctrl,
+ enum led_brightness brightness)
+{
+ /*
+ * Indicator LEDs, unlike torch LEDs, are turned on/off basing on
+ * the state of V4L2_CID_FLASH_INDICATOR_INTENSITY control only.
+ * Do not decrement brightness read from the LED subsystem for
+ * indicator LED as it may equal 0. For torch LEDs this function
+ * is called only when V4L2_FLASH_LED_MODE_TORCH is set and the
+ * brightness read is guaranteed to be greater than 0. In the mode
+ * V4L2_FLASH_LED_MODE_NONE the cached torch intensity value is used.
+ */
+ if (ctrl->id != V4L2_CID_FLASH_INDICATOR_INTENSITY)
+ --brightness;
+
+ return (brightness * ctrl->step) + ctrl->minimum;
+}
+
+static void v4l2_flash_set_led_brightness(struct v4l2_flash *v4l2_flash,
+ struct v4l2_ctrl *ctrl)
+{
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ enum led_brightness brightness;
+
+ if (has_flash_op(v4l2_flash, intensity_to_led_brightness))
+ brightness = call_flash_op(v4l2_flash,
+ intensity_to_led_brightness,
+ ctrl->val);
+ else
+ brightness = __intensity_to_led_brightness(ctrl, ctrl->val);
+ /*
+ * In case a LED Flash class driver provides ops for custom
+ * brightness <-> intensity conversion, it also must have defined
+ * related v4l2 control step == 1. In such a case a backward conversion
+ * from led brightness to v4l2 intensity is required to find out the
+ * the aligned intensity value.
+ */
+ if (has_flash_op(v4l2_flash, led_brightness_to_intensity))
+ ctrl->val = call_flash_op(v4l2_flash,
+ led_brightness_to_intensity,
+ brightness);
+
+ if (ctrl == ctrls[TORCH_INTENSITY] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ return;
+
+ led_set_brightness(&v4l2_flash->fled_cdev->led_cdev, brightness);
+}
+
+static int v4l2_flash_update_led_brightness(struct v4l2_flash *v4l2_flash,
+ struct v4l2_ctrl *ctrl)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ int ret;
+
+ /*
+ * Update torch brightness only if in TORCH_MODE. In other modes torch
+ * led is turned off, which would spuriously inform the user space that
+ * V4L2_CID_FLASH_TORCH_INTENSITY control value has changed to 0.
+ */
+ if (ctrl == ctrls[TORCH_INTENSITY] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ return 0;
+
+ ret = led_update_brightness(led_cdev);
+ if (ret < 0)
+ return ret;
+
+ if (has_flash_op(v4l2_flash, led_brightness_to_intensity))
+ ctrl->val = call_flash_op(v4l2_flash,
+ led_brightness_to_intensity,
+ led_cdev->brightness);
+ else
+ ctrl->val = __led_brightness_to_intensity(ctrl,
+ led_cdev->brightness);
+
+ return 0;
+}
+
+static int v4l2_flash_g_volatile_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ bool is_strobing;
+ int ret;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ return v4l2_flash_update_led_brightness(v4l2_flash, c);
+ case V4L2_CID_FLASH_INTENSITY:
+ ret = led_update_flash_brightness(fled_cdev);
+ if (ret < 0)
+ return ret;
+ /* no conversion is needed */
+ c->val = fled_cdev->brightness.val;
+ return 0;
+ case V4L2_CID_FLASH_STROBE_STATUS:
+ ret = led_get_flash_strobe(fled_cdev, &is_strobing);
+ if (ret < 0)
+ return ret;
+ c->val = is_strobing;
+ return 0;
+ case V4L2_CID_FLASH_FAULT:
+ /* LED faults map directly to V4L2 flash faults */
+ return led_get_flash_fault(fled_cdev, &c->val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static bool __software_strobe_mode_inactive(struct v4l2_ctrl **ctrls)
+{
+ return ((ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH) ||
+ (ctrls[STROBE_SOURCE] && (ctrls[STROBE_SOURCE]->val !=
+ V4L2_FLASH_STROBE_SOURCE_SOFTWARE)));
+}
+
+static int v4l2_flash_s_ctrl(struct v4l2_ctrl *c)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_ctrl_to_v4l2_flash(c);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ bool external_strobe;
+ int ret = 0;
+
+ switch (c->id) {
+ case V4L2_CID_FLASH_LED_MODE:
+ switch (c->val) {
+ case V4L2_FLASH_LED_MODE_NONE:
+ led_set_brightness(led_cdev, LED_OFF);
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_FLASH_LED_MODE_FLASH:
+ /* Turn the torch LED off */
+ led_set_brightness(led_cdev, LED_OFF);
+ if (ctrls[STROBE_SOURCE]) {
+ external_strobe = (ctrls[STROBE_SOURCE]->val ==
+ V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+
+ ret = call_flash_op(v4l2_flash,
+ external_strobe_set,
+ external_strobe);
+ }
+ return ret;
+ case V4L2_FLASH_LED_MODE_TORCH:
+ if (ctrls[STROBE_SOURCE]) {
+ ret = call_flash_op(v4l2_flash,
+ external_strobe_set,
+ false);
+ if (ret < 0)
+ return ret;
+ }
+ /* Stop flash strobing */
+ ret = led_set_flash_strobe(fled_cdev, false);
+ if (ret < 0)
+ return ret;
+
+ v4l2_flash_set_led_brightness(v4l2_flash,
+ ctrls[TORCH_INTENSITY]);
+ return 0;
+ }
+ break;
+ case V4L2_CID_FLASH_STROBE_SOURCE:
+ external_strobe = (c->val == V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+ /*
+ * For some hardware arrangements setting strobe source may
+ * affect torch mode. Therefore, if not in the flash mode,
+ * cache only this setting. It will be applied upon switching
+ * to flash mode.
+ */
+ if (ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_FLASH)
+ return 0;
+
+ return call_flash_op(v4l2_flash, external_strobe_set,
+ external_strobe);
+ case V4L2_CID_FLASH_STROBE:
+ if (__software_strobe_mode_inactive(ctrls))
+ return -EBUSY;
+ return led_set_flash_strobe(fled_cdev, true);
+ case V4L2_CID_FLASH_STROBE_STOP:
+ if (__software_strobe_mode_inactive(ctrls))
+ return -EBUSY;
+ return led_set_flash_strobe(fled_cdev, false);
+ case V4L2_CID_FLASH_TIMEOUT:
+ /* no conversion is needed */
+ return led_set_flash_timeout(fled_cdev, c->val);
+ case V4L2_CID_FLASH_INTENSITY:
+ /* no conversion is needed */
+ return led_set_flash_brightness(fled_cdev, c->val);
+ case V4L2_CID_FLASH_TORCH_INTENSITY:
+ case V4L2_CID_FLASH_INDICATOR_INTENSITY:
+ v4l2_flash_set_led_brightness(v4l2_flash, c);
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static const struct v4l2_ctrl_ops v4l2_flash_ctrl_ops = {
+ .g_volatile_ctrl = v4l2_flash_g_volatile_ctrl,
+ .s_ctrl = v4l2_flash_s_ctrl,
+};
+
+static void fill_ctrl_init_data(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_ctrl_config *flash_ctrl_cfg,
+ struct v4l2_flash_ctrl_data *ctrl_init_data)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ const struct led_flash_ops *fled_cdev_ops = fled_cdev->ops;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ u32 mask;
+
+ /* Init FLASH_FAULT ctrl data */
+ if (flash_ctrl_cfg->flash_faults) {
+ ctrl_init_data[FLASH_FAULT].cid = V4L2_CID_FLASH_FAULT;
+ ctrl_cfg = &ctrl_init_data[FLASH_FAULT].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_FAULT;
+ ctrl_cfg->max = flash_ctrl_cfg->flash_faults;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init INDICATOR_INTENSITY ctrl data */
+ if (flash_ctrl_cfg->indicator_led) {
+ ctrl_init_data[INDICATOR_INTENSITY].cid =
+ V4L2_CID_FLASH_INDICATOR_INTENSITY;
+ ctrl_init_data[INDICATOR_INTENSITY].config =
+ flash_ctrl_cfg->intensity;
+ ctrl_cfg = &ctrl_init_data[INDICATOR_INTENSITY].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_INDICATOR_INTENSITY;
+ ctrl_cfg->min = 0;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ /* Indicator LED can have only faults and intensity controls. */
+ return;
+ }
+
+ /* Init FLASH_LED_MODE ctrl data */
+ mask = 1 << V4L2_FLASH_LED_MODE_NONE |
+ 1 << V4L2_FLASH_LED_MODE_TORCH;
+ if (led_cdev->flags & LED_DEV_CAP_FLASH)
+ mask |= 1 << V4L2_FLASH_LED_MODE_FLASH;
+
+ ctrl_init_data[LED_MODE].cid = V4L2_CID_FLASH_LED_MODE;
+ ctrl_cfg = &ctrl_init_data[LED_MODE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_LED_MODE;
+ ctrl_cfg->max = V4L2_FLASH_LED_MODE_TORCH;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_LED_MODE_NONE;
+ ctrl_cfg->flags = 0;
+
+ /* Init TORCH_INTENSITY ctrl data */
+ ctrl_init_data[TORCH_INTENSITY].cid = V4L2_CID_FLASH_TORCH_INTENSITY;
+ ctrl_init_data[TORCH_INTENSITY].config = flash_ctrl_cfg->intensity;
+ ctrl_cfg = &ctrl_init_data[TORCH_INTENSITY].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_TORCH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+
+ if (!(led_cdev->flags & LED_DEV_CAP_FLASH))
+ return;
+
+ /* Init FLASH_STROBE ctrl data */
+ ctrl_init_data[FLASH_STROBE].cid = V4L2_CID_FLASH_STROBE;
+ ctrl_cfg = &ctrl_init_data[FLASH_STROBE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE;
+
+ /* Init STROBE_STOP ctrl data */
+ ctrl_init_data[STROBE_STOP].cid = V4L2_CID_FLASH_STROBE_STOP;
+ ctrl_cfg = &ctrl_init_data[STROBE_STOP].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STOP;
+
+ /* Init FLASH_STROBE_SOURCE ctrl data */
+ if (flash_ctrl_cfg->has_external_strobe) {
+ mask = (1 << V4L2_FLASH_STROBE_SOURCE_SOFTWARE) |
+ (1 << V4L2_FLASH_STROBE_SOURCE_EXTERNAL);
+ ctrl_init_data[STROBE_SOURCE].cid =
+ V4L2_CID_FLASH_STROBE_SOURCE;
+ ctrl_cfg = &ctrl_init_data[STROBE_SOURCE].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_SOURCE;
+ ctrl_cfg->max = V4L2_FLASH_STROBE_SOURCE_EXTERNAL;
+ ctrl_cfg->menu_skip_mask = ~mask;
+ ctrl_cfg->def = V4L2_FLASH_STROBE_SOURCE_SOFTWARE;
+ }
+
+ /* Init STROBE_STATUS ctrl data */
+ if (fled_cdev_ops->strobe_get) {
+ ctrl_init_data[STROBE_STATUS].cid =
+ V4L2_CID_FLASH_STROBE_STATUS;
+ ctrl_cfg = &ctrl_init_data[STROBE_STATUS].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_STROBE_STATUS;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE |
+ V4L2_CTRL_FLAG_READ_ONLY;
+ }
+
+ /* Init FLASH_TIMEOUT ctrl data */
+ if (fled_cdev_ops->timeout_set) {
+ ctrl_init_data[FLASH_TIMEOUT].cid = V4L2_CID_FLASH_TIMEOUT;
+ ctrl_init_data[FLASH_TIMEOUT].config =
+ flash_ctrl_cfg->flash_timeout;
+ ctrl_cfg = &ctrl_init_data[FLASH_TIMEOUT].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_TIMEOUT;
+ }
+
+ /* Init FLASH_INTENSITY ctrl data */
+ if (fled_cdev_ops->flash_brightness_set) {
+ ctrl_init_data[FLASH_INTENSITY].cid = V4L2_CID_FLASH_INTENSITY;
+ ctrl_init_data[FLASH_INTENSITY].config =
+ flash_ctrl_cfg->flash_intensity;
+ ctrl_cfg = &ctrl_init_data[FLASH_INTENSITY].config;
+ ctrl_cfg->id = V4L2_CID_FLASH_INTENSITY;
+ ctrl_cfg->flags = V4L2_CTRL_FLAG_VOLATILE;
+ }
+}
+
+static int v4l2_flash_init_controls(struct v4l2_flash *v4l2_flash,
+ struct v4l2_flash_ctrl_config *flash_ctrl_cfg)
+
+{
+ struct v4l2_flash_ctrl_data *ctrl_init_data;
+ struct v4l2_ctrl *ctrl;
+ struct v4l2_ctrl_config *ctrl_cfg;
+ int i, ret, num_ctrls = 0;
+
+ /* allocate memory dynamically so as not to exceed stack frame size */
+ ctrl_init_data = kcalloc(NUM_FLASH_CTRLS, sizeof(*ctrl_init_data),
+ GFP_KERNEL);
+ if (!ctrl_init_data)
+ return -ENOMEM;
+
+ fill_ctrl_init_data(v4l2_flash, flash_ctrl_cfg, ctrl_init_data);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i)
+ if (ctrl_init_data[i].cid)
+ ++num_ctrls;
+
+ v4l2_ctrl_handler_init(&v4l2_flash->hdl, num_ctrls);
+
+ for (i = 0; i < NUM_FLASH_CTRLS; ++i) {
+ ctrl_cfg = &ctrl_init_data[i].config;
+ if (!ctrl_init_data[i].cid)
+ continue;
+
+ if (ctrl_cfg->id == V4L2_CID_FLASH_LED_MODE ||
+ ctrl_cfg->id == V4L2_CID_FLASH_STROBE_SOURCE)
+ ctrl = v4l2_ctrl_new_std_menu(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->max,
+ ctrl_cfg->menu_skip_mask,
+ ctrl_cfg->def);
+ else
+ ctrl = v4l2_ctrl_new_std(&v4l2_flash->hdl,
+ &v4l2_flash_ctrl_ops,
+ ctrl_cfg->id,
+ ctrl_cfg->min,
+ ctrl_cfg->max,
+ ctrl_cfg->step,
+ ctrl_cfg->def);
+
+ if (ctrl)
+ ctrl->flags |= ctrl_cfg->flags;
+
+ if (i <= STROBE_SOURCE)
+ v4l2_flash->ctrls[i] = ctrl;
+ }
+
+ kfree(ctrl_init_data);
+
+ if (v4l2_flash->hdl.error) {
+ ret = v4l2_flash->hdl.error;
+ goto error_free_handler;
+ }
+
+ v4l2_ctrl_handler_setup(&v4l2_flash->hdl);
+
+ v4l2_flash->sd.ctrl_handler = &v4l2_flash->hdl;
+
+ return 0;
+
+error_free_handler:
+ v4l2_ctrl_handler_free(&v4l2_flash->hdl);
+ return ret;
+}
+
+static int __sync_device_with_v4l2_controls(struct v4l2_flash *v4l2_flash)
+{
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct v4l2_ctrl **ctrls = v4l2_flash->ctrls;
+ int ret = 0;
+
+ if (ctrls[FLASH_TIMEOUT]) {
+ ret = led_set_flash_timeout(fled_cdev,
+ ctrls[FLASH_TIMEOUT]->val);
+ if (ret < 0)
+ return ret;
+ }
+
+ if (ctrls[FLASH_INTENSITY]) {
+ ret = led_set_flash_brightness(fled_cdev,
+ ctrls[FLASH_INTENSITY]->val);
+ if (ret < 0)
+ return ret;
+ }
+
+ /*
+ * For some hardware arrangements setting strobe source may affect
+ * torch mode. Synchronize strobe source setting only if not in torch
+ * mode. For torch mode case it will get synchronized upon switching
+ * to flash mode.
+ */
+ if (ctrls[STROBE_SOURCE] &&
+ ctrls[LED_MODE]->val != V4L2_FLASH_LED_MODE_TORCH)
+ ret = call_flash_op(v4l2_flash, external_strobe_set,
+ ctrls[STROBE_SOURCE]->val);
+
+ if (ctrls[INDICATOR_INTENSITY])
+ v4l2_flash_set_led_brightness(v4l2_flash,
+ ctrls[INDICATOR_INTENSITY]);
+ else
+ v4l2_flash_set_led_brightness(v4l2_flash,
+ ctrls[TORCH_INTENSITY]);
+
+ return ret;
+}
+
+/*
+ * V4L2 subdev internal operations
+ */
+
+static int v4l2_flash_open(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh)
+{
+ struct v4l2_flash *v4l2_flash = v4l2_subdev_to_v4l2_flash(sd);
+ struct led_classdev_flash *fled_cdev = v4l2_flash->fled_cdev;
+ struct led_classdev *led_cdev = &fled_cdev->led_cdev;
+ int ret = 0;
