Chanwoo Choi wrote: > > Dear Kukjin, > Hi, > Could you please pick or review this patch-set? > Sorry for late response and honestly I was looking at the review in ml ;-) Anyway I have no objection on this series except using ARCH_EXYNOS for clock stuff in other series for exynos5433 but I agree we don't have other solution at this moment. I'll queue this series. Thanks, Kukjin > Best Regards, > Chanwoo Choi > > On Wed, Mar 18, 2015 at 9:17 AM, Chanwoo Choi <cw00.choi@xxxxxxxxxxx> wrote: > > This patchset adds new 64-bit Exynos5433 Samsung SoC which contains quad > > Cortex-A57 and quad Cortex-A53. It is desigend with the 20nm low power process. > > > > Depends on: > > - This patch-set has the dependency on Exynos5433 clock driver[1] and pinctrl driver[2]. > > The Exynos5433 clock controller patch-set[1] was merged by Michael Turquette. > > and Exynos5433's pinctrl patch[2] was merged by Linus Walleij. Exynos5433's TMU patch[3] > > will be refactoring without feature update. > > > > [1] > http://git.linaro.org/people/mike.turquette/linux.git/commit/cc91909b9683c834485fd0627708c81d9398bf02 > > [2] https://git.kernel.org/cgit/linux/kernel/git/linusw/linux-pinctrl.git/commit/?h=for- > next&id=3c5ecc9ed3537846fd95e8f288d6d6968075879f > > [3] [PATCH 0/3] thermal: exynos: Add support for Exynos5433 TMU > > - https://lkml.org/lkml/2015/2/26/234 > > > > Changelog: > > > > Changes fromv v6: > > (https://lkml.org/lkml/2015/3/9/1036) > > - Fix wrong base address of CMU_MSCL dt node (0x105d0000 -> 0x150d0000) > > - Adjust the length of memory mapped region for all clock domains > > > > Changes from v5: > > (https://lkml.org/lkml/2015/3/5/27) > > - Move 'timer' dt node under root node by Mark Rutland's comment > > > > Changes from v4: > > (https://lkml.org/lkml/2015/2/24/2) > > - Rebased it on Linux 4.0-rc2 > > - Remove CONFIG_ARCH_EXYNOS5433 configuration by Arnd Bergmann's comment > > - Move 'aliases' dt node from SoC dtsi to board dts file by Arnd Bergmann's comment > > - Add Exynos5433 TMU patches which got the Lukasz Majewski's reviewed message > > > > Changes from v3: > > (https://lkml.org/lkml/2015/2/12/65) > > - Rebased it on Linux 4.0-rc1. > > - Remove ARM_GIC and ARM_AMBA dependency because CONFIG_ARM64 already included them. > > > > Changes from v2: > > (https://lkml.org/lkml/2014/12/2/134) > > : Fix the range of GICC memory map (0x1000 -> 0x2000) > > : Fix address space of 'range' property under 'soc' node > > : Add ADMA / I2S dt node for sound playback/capture > > - Select ARM_AMBA/ARM_GIC/HAVE_S3C_RTC for Exynos5433 in arch/arm64/Kconfig > > - Send separate patch-set for Exynos5433 clock controller[1][2] and pinctrl[3] > > > > Changes from v1: > > (https://lkml.org/lkml/2014/11/27/92) > > - Merge two patches (patch2, patch3) to solve incomplete description > > - Exynos5433 Clock driver > > : Fix wrong register and code clean by using space instead of tab > > : Add CLK_IGNORE_UNUSED flag to pclk_sysreg_* clock for accessing system control register > > : Remove duplicate definition on the patch for CMU_BUS{0|1|2} domain > > - Exynos5433 SoC DTS > > : Remove un-supported properties of arch_timer > > : Remove 'clock-frequency' property from 'cpus' dt node > > : Fix interrupt type from edge rising triggering to level high triggering > > because Cortex-A53/A57 use level triggering. > > : Fix defult address-size/size-celss from 1 to 2 because Exynos5433 is 64-bit SoC > > : Modify 'fin_pll' dt node to remove un-needed and ugly code > > : Move 'chipid' dt node under 'soc' > > : Use lowercase on all case in exynos5433.dtsi > > : Add PSCI dt node for secondary cpu boot > > : Add 'samsung,exynos5433' compatible to MCT dt node > > - Divide pinctrl patch from this patchset > > - Add new following patches: > > : clocksource: exynos_mct: Add the support for Exynos 64bit SoC > > : arm64: Enable Exynos5433 SoC in the defconfig > > ----------------------------------------------------- > > > > Chanwoo Choi (6): > > arm64: dts: exynos: Add dts files for 64-bit Exynos5433 SoC > > arm64: dts: exynos: Add SPI/PDMA dt node for Exynos5433 > > arm64: dts: exynos: Add PMU dt node for Exynos5433 > > arm64: dts: exynos: Add RTC and ADC dt node for Exynos5433 SoC > > arm64: dts: exynos: Add TMU sensor dt node for Exynos5433 SoC > > arm64: dts: exynos: Add thermal-zones dt node for Exynos5433 SoC > > > > Inha Song (2): > > arm64: dts: exynos: Add ADMA dt node for Exynos5433 SoC > > arm64: dts: exynos: Add I2S dt node for Exynos5433 SoC > > > > Jaehoon Chung (1): > > arm64: dts: exynos: Add MSHC dt node for Exynos5433 > > > > .../devicetree/bindings/arm/samsung/pmu.txt | 1 + > > arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi | 698 +++++++++++++++ > > .../dts/exynos/exynos5433-tmu-sensor-conf.dtsi | 22 + > > arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi | 231 +++++ > > arch/arm64/boot/dts/exynos/exynos5433.dtsi | 931 +++++++++++++++++++++ > > 5 files changed, 1883 insertions(+) > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-pinctrl.dtsi > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu-sensor-conf.dtsi > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433-tmu.dtsi > > create mode 100644 arch/arm64/boot/dts/exynos/exynos5433.dtsi -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
