On Fri, Aug 30, 2024 at 02:33:45PM +0300, Ciprian Costea wrote: > From: Ciprian Marian Costea <ciprianmarian.costea@xxxxxxxxxxx> > > This patchset adds 100mhz & 200mhz pinmux support for uSDHC. > Hence, UHS modes would be supported on NXP boards which enable > usage of VCCQ voltage supply @1.8V by default, with no additional > hardware (board) changes required, such as S32G399A-RDB3. > > Changes in V2: > - Added patch for disablement of UHS modes for NXP boards > where VCCQ voltage supply is set to 3.3V by default. > - Fixed S32G2, S32G3 dtb checks warnings related to uSDHC > pinmux renaming. > > Ciprian Marian Costea (2): > arm64: dts: s32g: Add S32G2/S32G3 uSDHC pinmux > arm64: dts: s32g2: Disable support for SD/eMMC UHS mode Applied both, thanks!
