When CONFIG_ENERGY_MODEL=y:
cpu cpu0: EM: invalid perf. state: -22
When removing the (incorrect) voltages from the Operating Points
Parameters tables, it was assumed they were optional, and unused, when
none of the CPU nodes is tied to a regulator using the "cpu-supply"
property. This assumption turned out to be incorrect, causing the
reported error message.
Fix this by re-adding the (correct) voltages. Note that because all
voltages are identical, all operating points are considered to have the
same efficiency, and the energy model always picks the one with the
highest clock rate.
Reported-by: Renesas Test Team via Kuninori Morimoto <kuninori.morimoto.gx@xxxxxxxxxxx>
Fixes: fb76b0fae3ca8803 ("arm64: dts: renesas: r8a77990: Remove bogus voltages from OPP table")
Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx>
---
arch/arm64/boot/dts/renesas/r8a77990.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 233af3081e84a407..26d08f2cbcb6417b 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -49,14 +49,17 @@ cluster1_opp: opp-table-1 {
opp-shared;
opp-800000000 {
opp-hz = /bits/ 64 <800000000>;
+ opp-microvolt = <1030000>;
clock-latency-ns = <300000>;
};
opp-1000000000 {
opp-hz = /bits/ 64 <1000000000>;
+ opp-microvolt = <1030000>;
clock-latency-ns = <300000>;
};
opp-1200000000 {
opp-hz = /bits/ 64 <1200000000>;
+ opp-microvolt = <1030000>;
clock-latency-ns = <300000>;
opp-suspend;
};
--
2.34.1
