On 04.09.24 10:53 AM, Frieder Schrempf wrote: > From: Frieder Schrempf <frieder.schrempf@xxxxxxxxxx> > > Patch 1: board DT bindings > Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees > Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees > > Changes for v3: > > * Address Shawn's review comments (thanks!) > * Fix HDMI DDC interface > * Fix gpio-hog pinctrl in DL devicetree > * Fix DT check warnings in DL devicetree > * Adjust LVDS panel node to match that of proposed DL i.MX8MM > > Changes for v2: > > DT bindings (patch1): > * Add tags from Krzysztof and Conor (thanks!) > > SMARC DTs (patch 3): > * Fix GPIO labels > * Add support for TPM chip on SMARC module > * Disable PWM in favor of GPIO5 on SMARC carrier > * Enable LCDIF node to make HDMI work > * Add support for GPIO expanders on SMARC carrier > * Remove SPI flash as its removable and should be in an overlay > * Add CAN regulators to fix transceiver enable > > Frieder Schrempf (3): > dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards > arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier > board > arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval > carrier Gentle ping for this series. Shawn, can you apply this for v6.13, please? Thanks Frieder
