> > > > Add support for ast2700 clock controller. > > > > Signed-off-by: Kevin Chen <kevin_chen@xxxxxxxxxxxxxx> > > --- > > drivers/clk/Makefile | 1 + > > drivers/clk/clk-ast2700.c | 1173 > > +++++++++++++++++++++++++++++++++++++ > > 2 files changed, 1174 insertions(+) > > create mode 100644 drivers/clk/clk-ast2700.c > > > > diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index > > f793a16cad40..0d5992ea0fa4 100644 > > --- a/drivers/clk/Makefile > > +++ b/drivers/clk/Makefile > > @@ -38,6 +38,7 @@ obj-$(CONFIG_COMMON_CLK_FSL_SAI) += > clk-fsl-sai.o > > obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o > > obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o > > obj-$(CONFIG_MACH_ASPEED_G6) += clk-ast2600.o > > +obj-$(CONFIG_MACH_ASPEED_G7) += clk-ast2700.o > > obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o > > obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o > > obj-$(CONFIG_COMMON_CLK_K210) += clk-k210.o > > diff --git a/drivers/clk/clk-ast2700.c b/drivers/clk/clk-ast2700.c new > > file mode 100644 index 000000000000..eec8e0cb83d9 > > --- /dev/null > > +++ b/drivers/clk/clk-ast2700.c > > @@ -0,0 +1,1173 @@ > > +// SPDX-License-Identifier: GPL-2.0-or-later // Copyright ASPEED > > +Technology > > + > > +#include <linux/clk-provider.h> > > +#include <linux/of_address.h> > > +#include <linux/of_device.h> > > +#include <linux/reset-controller.h> > > + > > +#include <dt-bindings/clock/aspeed,ast2700-clk.h> > > +#include <dt-bindings/reset/aspeed,ast2700-reset.h> > > + > > +#define SCU_CLK_24MHZ 24000000 > > Are Aspeed's 24 MHz somehow different from 24 MHz on other platforms? > Please use <linux/units.h> and refrain from defining just random values. If it > has some special meaning (like XO clock or some other fixed funcion), please > use logical names. Already split clock and reset to Ryan's commit. https://patchwork.kernel.org/project/linux-clk/list/?series=892020 Please check the series of " Add support for AST2700 clk driver". > > > +#define SCU_CLK_25MHZ 25000000 > > +#define SCU_CLK_192MHZ 192000000 > > +/* SOC0 USB2 PHY CLK*/ > > +#define SCU_CLK_12MHZ 12000000 > > So, this can be #define ASPEED_SOC0_USB2_PHY_RATE (12 * HZ_PER_MHZ) Already split clock and reset to Ryan's commit. https://patchwork.kernel.org/project/linux-clk/list/?series=892020 Please check the series of " Add support for AST2700 clk driver". > > > +/* SOC0 */ > > +#define SCU0_HWSTRAP1 0x010 > > +#define SCU0_CLK_STOP 0x240 > > +#define SCU0_CLK_SEL1 0x280 > > +#define SCU0_CLK_SEL2 0x284 > > +#define GET_USB_REFCLK_DIV(x) ((GENMASK(23, 20) & (x)) >> 20) #define > > +UART_DIV13_EN BIT(30) #define SCU0_HPLL_PARAM 0x300 #define > > +SCU0_DPLL_PARAM 0x308 #define SCU0_MPLL_PARAM 0x310 #define > > +SCU0_D1CLK_PARAM 0x320 #define SCU0_D2CLK_PARAM 0x330 #define > > +SCU0_CRT1CLK_PARAM 0x340 #define SCU0_CRT2CLK_PARAM 0x350 > #define > > +SCU0_MPHYCLK_PARAM 0x360 > > + > > +/* SOC1 */ > > +#define SCU1_CLK_STOP 0x240 > > +#define SCU1_CLK_STOP2 0x260 > > +#define SCU1_CLK_SEL1 0x280 > > +#define SCU1_CLK_SEL2 0x284 > > +#define UXCLK_MASK GENMASK(1, 0) > > +#define HUXCLK_MASK GENMASK(4, 3) > > +#define SCU1_HPLL_PARAM 0x300 > > +#define SCU1_APLL_PARAM 0x310 > > +#define SCU1_DPLL_PARAM 0x320 > > +#define SCU1_UXCLK_CTRL 0x330 > > +#define SCU1_HUXCLK_CTRL 0x334 > > +#define SCU1_MAC12_CLK_DLY 0x390 > > +#define SCU1_MAC12_CLK_DLY_100M 0x394 #define > SCU1_MAC12_CLK_DLY_10M > > +0x398 > > + > > +/* > > + * MAC Clock Delay settings > > + */ > > +#define MAC_CLK_RMII1_50M_RCLK_O_CTRL BIT(30) > > +#define MAC_CLK_RMII1_50M_RCLK_O_DIS 0 > > +#define MAC_CLK_RMII1_50M_RCLK_O_EN 1 > > +#define MAC_CLK_RMII0_50M_RCLK_O_CTRL BIT(29) > > +#define MAC_CLK_RMII0_5M_RCLK_O_DIS 0 > > +#define MAC_CLK_RMII0_5M_RCLK_O_EN 1 > > +#define MAC_CLK_RMII_TXD_FALLING_2 BIT(27) > > +#define MAC_CLK_RMII_TXD_FALLING_1 BIT(26) > > +#define MAC_CLK_RXCLK_INV_2 BIT(25) > > +#define MAC_CLK_RXCLK_INV_1 BIT(24) > > +#define MAC_CLK_1G_INPUT_DELAY_2 GENMASK(23, 18) > > +#define MAC_CLK_1G_INPUT_DELAY_1 GENMASK(17, 12) > > +#define MAC_CLK_1G_OUTPUT_DELAY_2 GENMASK(11, 6) > > +#define MAC_CLK_1G_OUTPUT_DELAY_1 GENMASK(5, 0) > > + > > +#define MAC_CLK_100M_10M_RESERVED GENMASK(31, > 26) > > +#define MAC_CLK_100M_10M_RXCLK_INV_2 BIT(25) > > +#define MAC_CLK_100M_10M_RXCLK_INV_1 BIT(24) > > +#define MAC_CLK_100M_10M_INPUT_DELAY_2 GENMASK(23, > 18) > > +#define MAC_CLK_100M_10M_INPUT_DELAY_1 GENMASK(17, > 12) > > +#define MAC_CLK_100M_10M_OUTPUT_DELAY_2 > GENMASK(11, 6) > > +#define MAC_CLK_100M_10M_OUTPUT_DELAY_1 > GENMASK(5, 0) > > + > > +#define AST2700_DEF_MAC12_DELAY_1G 0x00CF4D75 > > lowcase hex, please. Already split clock and reset to Ryan's commit. https://patchwork.kernel.org/project/linux-clk/list/?series=892020 Please check the series of " Add support for AST2700 clk driver". > > > +#define AST2700_DEF_MAC12_DELAY_100M 0x00410410 > > +#define AST2700_DEF_MAC12_DELAY_10M 0x00410410 > > + > > +struct mac_delay_config { > > + u32 tx_delay_1000; > > + u32 rx_delay_1000; > > + u32 tx_delay_100; > > + u32 rx_delay_100; > > + u32 tx_delay_10; > > + u32 rx_delay_10; > > +}; > > + > > +/* Globally visible clocks */ > > +static DEFINE_SPINLOCK(ast2700_clk_lock); > > + > > +/* Division of RGMII Clock */ > > +static const struct clk_div_table ast2700_rgmii_div_table[] = { > > + { 0x0, 4 }, > > + { 0x1, 4 }, > > + { 0x2, 6 }, > > + { 0x3, 8 }, > > + { 0x4, 10 }, > > + { 0x5, 12 }, > > + { 0x6, 14 }, > > + { 0x7, 16 }, > > + { 0 } > > +}; > > + > > +/* Division of RMII Clock */ > > +static const struct clk_div_table ast2700_rmii_div_table[] = { > > + { 0x0, 8 }, > > + { 0x1, 8 }, > > + { 0x2, 12 }, > > + { 0x3, 16 }, > > + { 0x4, 20 }, > > + { 0x5, 24 }, > > + { 0x6, 28 }, > > + { 0x7, 32 }, > > + { 0 } > > +}; > > + > > +/* Division of HCLK/SDIO/MAC/apll_divn CLK */ static const struct > > +clk_div_table ast2700_clk_div_table[] = { > > + { 0x0, 2 }, > > + { 0x1, 2 }, > > + { 0x2, 3 }, > > + { 0x3, 4 }, > > + { 0x4, 5 }, > > + { 0x5, 6 }, > > + { 0x6, 7 }, > > + { 0x7, 8 }, > > + { 0 } > > +}; > > + > > +/* Division of PCLK/EMMC CLK */ > > +static const struct clk_div_table ast2700_clk_div_table2[] = { > > + { 0x0, 2 }, > > + { 0x1, 4 }, > > + { 0x2, 6 }, > > + { 0x3, 8 }, > > + { 0x4, 10 }, > > + { 0x5, 12 }, > > + { 0x6, 14 }, > > + { 0x7, 16 }, > > + { 0 } > > +}; > > + > > +/* HPLL/DPLL: 2000Mhz(default) */ > > +static struct clk_hw *ast2700_soc0_hw_pll(const char *name, const > > +char *parent_name, u32 val) > > Please migrate from using parent_names to either using parent_hw or using > fwname to specify the parent clock. Already split clock and reset to Ryan's commit. https://patchwork.kernel.org/project/linux-clk/list/?series=892020 Please check the series of " Add support for AST2700 clk driver". > > > +{ > > + unsigned int mult, div; > > + > > + if (val & BIT(24)) { > > + /* Pass through mode */ > > + mult = 1; > > + div = 1; > > + } else { > > + /* F = CLKIN(25MHz) * [(M+1) / 2(N+1)] / (P+1) */ > > + u32 m = val & 0x1fff; > > + u32 n = (val >> 13) & 0x3f; > > + u32 p = (val >> 19) & 0xf; > > + > > + mult = (m + 1) / (2 * (n + 1)); > > + div = (p + 1); > > + } > > + > > + return clk_hw_register_fixed_factor(NULL, name, parent_name, > > +0, mult, div); }; > > + > > +/* MPLL 1600Mhz(default) */ > > +static struct clk_hw *ast2700_calc_mpll(const char *name, const char > > +*parent_name, u32 val) { > > + unsigned int mult, div; > > + > > + if (val & BIT(24)) { > > + /* Pass through mode */ > > + div = 1; > > + mult = div; > > + } else { > > + /* F = CLKIN(25MHz) * [CLKF/(CLKR+1)] /(CLKOD+1) */ > > + u32 m = val & 0x1fff; > > + u32 n = (val >> 13) & 0x3f; > > + u32 p = (val >> 19) & 0xf; > > + > > + mult = m / (n + 1); > > + div = (p + 1); > > + } > > + return clk_hw_register_fixed_factor(NULL, name, parent_name, > > +0, mult, div); }; > > + > > +static struct clk_hw *ast2700_calc_uclk(const char *name, u32 val) { > > + unsigned int mult, div; > > + > > + /* UARTCLK = UXCLK * R / (N * 2) */ > > + u32 r = val & 0xff; > > + u32 n = (val >> 8) & 0x3ff; > > + > > + mult = r; > > + div = n * 2; > > + > > + return clk_hw_register_fixed_factor(NULL, name, "uxclk", 0, > > +mult, div); }; > > + > > +static struct clk_hw *ast2700_calc_huclk(const char *name, u32 val) { > > + unsigned int mult, div; > > + > > + /* UARTCLK = UXCLK * R / (N * 2) */ > > + u32 r = val & 0xff; > > + u32 n = (val >> 8) & 0x3ff; > > + > > + mult = r; > > + div = n * 2; > > + > > + return clk_hw_register_fixed_factor(NULL, name, "huxclk", 0, > > +mult, div); }; > > + > > +static struct clk_hw *ast2700_calc_soc1_pll(const char *name, const > > +char *parent_name, u32 val) > > How is this different from ast2700_soc0_hw_pll() ? Already split clock and reset to Ryan's commit. https://patchwork.kernel.org/project/linux-clk/list/?series=892020 Please check the series of " Add support for AST2700 clk driver". > > > +{ > > + unsigned int mult, div; > > + > > + if (val & BIT(24)) { > > + /* Pass through mode */ > > + div = 1; > > + mult = div; > > + } else { > > + /* F = 25Mhz * [(M + 1) / (n + 1)] / (p + 1) */ > > + u32 m = val & 0x1fff; > > + u32 n = (val >> 13) & 0x3f; > > + u32 p = (val >> 19) & 0xf; > > + > > + mult = (m + 1) / (n + 1); > > + div = (p + 1); > > + } > > + return clk_hw_register_fixed_factor(NULL, name, parent_name, > > +0, mult, div); }; > > + > > > -- > With best wishes > Dmitry
