On Mon, 07 Oct 2024 12:18:23 -0400, Frank Li wrote: > The driver(drivers/irqchip/irq-ls-extirq.c) have not use standard DT > function to parser interrupt-map. So it doesn't consider '#address-size' > in parent interrupt controller, such as GIC. > > When dt-binding verify interrupt-map, item data matrix is spitted at > incorrect position. So cause below warning: > > arch/arm64/boot/dts/freescale/fsl-ls1088a-qds.dtb: interrupt-controller@14: > interrupt-map: [[0, 0, 1, 0, 0, 4, 1, 0], [1, 0, 1, 4, 2, 0, 1, 0], ... > is too short > > Remove interrupt-map restriction to workaround this warning for > 'fsl,ls1088a-extirq', 'fsl,ls2080a-extirq' and fsl,lx2160a-extirq. > Other keep the same restriction. > > Signed-off-by: Frank Li <Frank.Li@xxxxxxx> > --- > Change from v2 to v3 > - remove interrupt-map restriction according rob's suggestion. > Change from v1 to v2 > - remove duplicate function in commit message > - only reduce miniItems for after 1088a chips > - maxItems change to 9. Otherwise report too long. > --- > .../interrupt-controller/fsl,ls-extirq.yaml | 26 ++++++++++++++++--- > 1 file changed, 23 insertions(+), 3 deletions(-) > Applied, thanks!
