On 7/10/24 19:40, Krzysztof Kozlowski wrote:
On Mon, Oct 07, 2024 at 12:33:45PM +1300, Chris Packham wrote:
Add a dtschema for the SPI-NAND controller on the RTL9300 SoCs. The
controller supports
* Serial/Dual/Quad data with
* PIO and DMA data read/write operation
* Configurable flash access timing
Signed-off-by: Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
---
.../bindings/spi/realtek,rtl9300-snand.yaml | 58 +++++++++++++++++++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
diff --git a/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml b/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
new file mode 100644
index 000000000000..c66aea24cb35
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/realtek,rtl9300-snand.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/realtek,rtl9300-snand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SPI-NAND Flash Controller for Realtek RTL9300 SoCs
+
+maintainers:
+ - Chris Packham <chris.packham@xxxxxxxxxxxxxxxxxxx>
+
+description:
+ The Realtek RTL9300 SoCs have a built in SPI-NAND controller. It supports
+ typical SPI-NAND page cache operations in single, dual or quad IO mode.
+
+properties:
+ compatible:
+ items:
Why 9300 cannot be alone? What does 9300 mean even? Wildcards and family
models are not allowed in general.
The main thing about the RTL9300 is that that is what all the Realtek
documents use to refer to these chips and the specific numbers are akin
to the manufacturing part number that you'd actually order (maybe that's
a bit of a stretch).
The SoC/CPU block probably does exist as a separate silicon die that
they connect to the different switch blocks in the chips that they sell
but I don't think you can get "just" the SoC. There is every chance that
we'll see that same SoC/CPU block pop up in new chips (I see references
to a RTL9302D in some documents). I'd like to be able to support these
chips using "rtl9300" but if that's violating the wildcard rule I can
drop it.
+ - enum:
+ - realtek,rtl9301-snand
+ - realtek,rtl9302b-snand
+ - realtek,rtl9302c-snand
+ - realtek,rtl9303-snand
+ - const: realtek,rtl9300-snand
+
+ reg:
+ items:
+ - description: SPI NAND controller registers address and size
Also: why no clocks? Binding is supposed to be complete. If it cannot,
you should explain it in the commit msg.
I didn't add it because I had no need for it in my driver. But as you've
said previously the binding shouldn't care what the driver does.
I do have the clocking info from the datasheets. I'll add it in v2.
Best regards,
Krzysztof
