On Mon Sep 30, 2024 at 11:01 PM CEST, Heiko Stuebner wrote:
> The expected clock-name is different (ext_clock -> extclk) and the wakeup
According to "brcm,bluetooth.yaml", 'extclk' is deprecated in favor of
'txco', so it seems better to use that?
Same would be true for Rock960 boards (patch 6 of this series).
Cheers,
Diederik
> gpio properties are named differently when changing from vendor-tree to
> mainline. So fix those to match the binding.
>
> Fixes: 2e0537b16b25 ("arm64: dts: rockchip: Add dts for rockchip rk3566 box demo board")
> Cc: Andy Yan <andyshrk@xxxxxxx>
> Signed-off-by: Heiko Stuebner <heiko@xxxxxxxxx>
> ---
> arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> index 0c18406e4c59..dd6fe964d618 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3566-box-demo.dts
> @@ -449,9 +449,9 @@ &uart1 {
> bluetooth {
> compatible = "brcm,bcm43438-bt";
> clocks = <&pmucru CLK_RTC_32K>;
> - clock-names = "ext_clock";
> - device-wake-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> - host-wake-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> + clock-names = "extclk";
> + device-wakeup-gpios = <&gpio2 RK_PC1 GPIO_ACTIVE_HIGH>;
> + host-wakeup-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_HIGH>;
> shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
> pinctrl-names = "default";
> pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
Attachment:
signature.asc
Description: PGP signature
