sorry, I forget to CC Dmitry Baryshkov.
On Mon, Oct 07, 2024 at 09:02:50PM +0800, Jianhua Lu wrote:
> Add wifi node and this wifi module is connected to pice port.
> The following is qca6390 probe message:
> ath11k_pci 0000:01:00.0: Adding to iommu group 12
> ath11k_pci 0000:01:00.0: BAR 0 [mem 0x60400000-0x604fffff 64bit]: assigned
> ath11k_pci 0000:01:00.0: enabling device (0000 -> 0002)
> ath11k_pci 0000:01:00.0: MSI vectors: 32
> ath11k_pci 0000:01:00.0: qca6390 hw2.0
> ath11k_pci 0000:01:00.0: chip_id 0x0 chip_family 0xb board_id 0xff soc_id 0xffffffff
> ath11k_pci 0000:01:00.0: fw_version 0x10121492 fw_build_timestamp 2021-11-04 11:23 fw_build_id
>
> Signed-off-by: Jianhua Lu <lujianhua000@xxxxxxxxx>
> ---
> changes in v2:
> 1. add ath11k-calibration-variant property.
>
> .../dts/qcom/sm8250-xiaomi-elish-common.dtsi | 19 +++++++++++++++++++
> 1 file changed, 19 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> index ebea283f56ea..7a55e271c3ac 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-elish-common.dtsi
> @@ -680,6 +680,25 @@ &pcie0_phy {
> status = "okay";
> };
>
> +&pcieport0 {
> + wifi@0 {
> + compatible = "pci17cb,1101";
> + reg = <0x10000 0x0 0x0 0x0 0x0>;
> +
> + vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
> + vddaon-supply = <&vreg_pmu_aon_0p59>;
> + vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
> + vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
> + vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
> + vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
> + vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
> + vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
> + vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
> +
> + qcom,ath11k-calibration-variant = "Xiaomi_Pad_5Pro";
> + };
> +};
> +
> &pm8150_gpios {
> vol_up_n: vol-up-n-state {
> pins = "gpio6";
> --
> 2.46.0
>
