1. Add i2c, mmc to aliases.
4. Add PMIC_KEY setting.
5. Add USB HUB TUSB8020 to xhci1.
6. Re-order spi2 node.
Signed-off-by: Macpaul Lin <macpaul.lin@xxxxxxxxxxxx>
---
.../dts/mediatek/mt8390-genio-700-evk.dts | 57 +++++++++++++++----
1 file changed, 47 insertions(+), 10 deletions(-)
Changes for v2:
- Fix order of spi2.
- Update pinctrl in i2c4 and rt1715.
- Drop IT5205 and RT1715 nodes since the DTS are not completed yet.
- Add #address-cells and #size-cells to xhci1 for supporting USB hubs.
diff --git a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
index 96b272567cb1..3e77f59f2c74 100644
--- a/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8390-genio-700-evk.dts
@@ -23,6 +23,15 @@ / {
"mediatek,mt8188";
aliases {
+ i2c0 = &i2c0;
+ i2c1 = &i2c1;
+ i2c2 = &i2c2;
+ i2c3 = &i2c3;
+ i2c4 = &i2c4;
+ i2c5 = &i2c5;
+ i2c6 = &i2c6;
+ mmc0 = &mmc0;
+ mmc1 = &mmc1;
serial0 = &uart0;
};
@@ -249,7 +258,6 @@ &i2c3 {
&i2c4 {
pinctrl-names = "default";
pinctrl-0 = <&i2c4_pins>;
- pinctrl-1 = <&rt1715_int_pins>;
clock-frequency = <1000000>;
status = "okay";
};
@@ -867,6 +875,17 @@ pins-wifi-enable {
&pmic {
interrupt-parent = <&pio>;
interrupts = <222 IRQ_TYPE_LEVEL_HIGH>;
+
+ mt6359keys: keys {
+ compatible = "mediatek,mt6359-keys";
+ mediatek,long-press-mode = <1>;
+ power-off-time-sec = <0>;
+
+ power-key {
+ linux,keycodes = <KEY_POWER>;
+ wakeup-source;
+ };
+ };
};
&scp {
@@ -874,6 +893,15 @@ &scp {
status = "okay";
};
+&spi2 {
+ pinctrl-0 = <&spi2_pins>;
+ pinctrl-names = "default";
+ mediatek,pad-select = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+};
+
&uart0 {
pinctrl-0 = <&uart0_pins>;
pinctrl-names = "default";
@@ -892,15 +920,6 @@ &uart2 {
status = "okay";
};
-&spi2 {
- pinctrl-0 = <&spi2_pins>;
- pinctrl-names = "default";
- mediatek,pad-select = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-};
-
&u3phy0 {
status = "okay";
};
@@ -921,6 +940,24 @@ &xhci0 {
&xhci1 {
status = "okay";
vusb33-supply = <&mt6359_vusb_ldo_reg>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub_2_0: hub@1 {
+ compatible = "usb451,8025";
+ reg = <1>;
+ peer-hub = <&hub_3_0>;
+ reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&usb_hub_fixed_3v3>;
+ };
+
+ hub_3_0: hub@2 {
+ compatible = "usb451,8027";
+ reg = <2>;
+ peer-hub = <&hub_2_0>;
+ reset-gpios = <&pio 7 GPIO_ACTIVE_HIGH>;
+ vdd-supply = <&usb_hub_fixed_3v3>;
+ };
};
&xhci2 {
--
2.45.2
