Add QCOM System Control Management Interface (SCMI) Generic Vendor Extensions Protocol documentation. Signed-off-by: Sibi Sankar <quic_sibis@xxxxxxxxxxx> --- .../arm_scmi/vendors/qcom/qcom_generic.rst | 210 ++++++++++++++++++ 1 file changed, 210 insertions(+) create mode 100644 drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst diff --git a/drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst b/drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst new file mode 100644 index 000000000000..1ee6dabaac23 --- /dev/null +++ b/drivers/firmware/arm_scmi/vendors/qcom/qcom_generic.rst @@ -0,0 +1,210 @@ +.. SPDX-License-Identifier: GPL-2.0 +.. include:: <isonum.txt> + +=============================================================================== +QCOM System Control and Management Interface(SCMI) Vendor Protocols Extension +=============================================================================== + +:Copyright: |copy| 2024, Qualcomm Innovation Center, Inc. All rights reserved. + +:Author: Sibi Sankar <quic_sibis@xxxxxxxxxxx> + +SCMI_GENERIC: System Control and Management Interface QCOM Generic Vendor Protocol +================================================================================== + +This protocol is intended as a generic way of exposing a number of Qualcomm +SoC specific features through a mixture of pre-determined algorithm string and +param_id pairs hosted on the SCMI controller. It implements an interface compliant +with the Arm SCMI Specification with additional vendor specific commands as +detailed below. + +Commands: +_________ + +PROTOCOL_VERSION +~~~~~~~~~~~~~~~~ + +message_id: 0x0 +protocol_id: 0x80 + ++---------------+--------------------------------------------------------------+ +|Return values | ++---------------+--------------------------------------------------------------+ +|Name |Description | ++---------------+--------------------------------------------------------------+ +|int32 status |See ARM SCMI Specification for status code definitions. | ++---------------+--------------------------------------------------------------+ +|uint32 version |For this revision of the specification, this value must be | +| |0x10000. | ++---------------+--------------------------------------------------------------+ + +PROTOCOL_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x1 +protocol_id: 0x80 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |Bits[8] Set to 1. | +| |Bits[0] Set to 1. | ++------------------+-----------------------------------------------------------+ + +PROTOCOL_MESSAGE_ATTRIBUTES +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x2 +protocol_id: 0x80 + ++---------------+--------------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |See ARM SCMI Specification for status code definitions. | ++------------------+-----------------------------------------------------------+ +|uint32 attributes |For all message id's the parameter has a value of 0. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_SET_PARAM +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x10 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string | +| |and is used to set various parameters supported by it. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload for the specified param_id and | +| |algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the param_id and buf[] is parsed successfully | +| |by the chosen algorithm string. | +| |NOT_SUPPORTED: if the algorithm string does not have any | +| |matches. | +| |INVALID_PARAMETERS: if the param_id and the buf[] passed | +| |is rejected by the algorithm string. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_GET_PARAM +~~~~~~~~~~~~~~~~~~~ + +message_id: 0x11 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload and store of value for the specified | +| |param_id and algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the param_id and buf[] is parsed successfully | +| |by the chosen algorithm string and the result is copied | +| |into buf[]. | +| |NOT_SUPPORTED: if the algorithm string does not have any | +| |matches. | +| |INVALID_PARAMETERS: if the param_id and the buf[] passed | +| |is rejected by the algorithm string. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_START_ACTIVITY +~~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x12 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string | +| |and is generally used to start the activity performed by | +| |the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload for the specified param_id and | +| |algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the activity performed by the algorithm string | +| |starts successfully. | +| |NOT_SUPPORTED: if the algorithm string does not have any. | +| |matches or if the activity is already running. | ++------------------+-----------------------------------------------------------+ + +QCOM_SCMI_STOP_ACTIVITY +~~~~~~~~~~~~~~~~~~~~~~~ + +message_id: 0x13 +protocol_id: 0x80 + ++------------------+-----------------------------------------------------------+ +|Parameters | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|uint32 ext_id |Reserved, must be zero. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_low |Lower 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 algo_high |Upper 32-bit value of the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 param_id |Serves as the token message id for the algorithm string | +| |and is generally used to stop the activity performed by | +| |the algorithm string. | ++------------------+-----------------------------------------------------------+ +|uint32 buf[] |Serves as the payload for the specified param_id and | +| |algorithm string pair. | ++------------------+-----------------------------------------------------------+ +|Return values | ++------------------+-----------------------------------------------------------+ +|Name |Description | ++------------------+-----------------------------------------------------------+ +|int32 status |SUCCESS: if the activity performed by the algorithm string | +| |stops successfully. | +| |NOT_SUPPORTED: if the algorithm string does not have any | +| |matches or if the activity isn't running. | ++------------------+-----------------------------------------------------------+ -- 2.34.1
